DIN 1495-1-1983
小功率电动机和功率小于37瓦的电动机用有满足特殊要求的烧结金属制滑动轴承.球面轴承.尺寸
Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Spherical bearings; Dimensions
DIN 1495-2-1983
小功率电动机和功率小于37瓦的电动机用有满足特殊要求的烧结金属制滑动轴承.圆柱轴承.尺寸
Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Cylindrical bearings; Dimensions
DIN 1495-3-1996
小型和微型电机用有特殊要求的烧结金属制滑动轴承.第3部分:要求和试验
Plain bearings of sintered metal with specific requirements for small electrical motors and micro motors - Part 3: Requirements and testing
DIN 1496-1996
滑动轴承.SLPG试验机精密工程轴承的摩擦和磨损测试
Plain bearings - Testing of friction and wear of precision engineering bearings in the SLPG-Tester
DIN 15049-1958
带有电动葫芦或类似提升绞车的起重机.带滑动轴承的轨道轮
Cranes with electric hoists or similar hoist gear; track wheels with plain bearings
DIN 15050-1958
人工操作起重机.带滚动轴承的轨道轮
Hand-driven cranes; track wheels with roller bearings
DIN 15057-1978
起重机.滚珠和滚柱轴承的盖.连接尺寸
Cranes; covers for ball and roller bearings, connecting dimensions
DIN 15062-2-1982
起重机.绳轮.轴承和轮毂尺寸
Cranes; rope pulleys; dimensions of hubs and bearings
DIN 15074-1978
起重机..无齿轮带滑动轴承的起重机凸缘导轨轮
Cranes; flanged crane rail wheels with plain bearings, without gear wheel
DIN 15075-1977
起重机.带齿轮的装有关节轴承的有法兰的起重机轨道轮
Cranes; flanged crane rail wheels, with plain bearings, with gear wheel
DIN 15076-1977
起重机.不带齿轮的装有关节轴承的带轮胎的有法兰的起重机轨道轮
Cranes; flanged crane rail wheels with tyre, with plain bearings, without gear wheel
DIN 15077-1977
起重机.带滑动轴承和齿轮的带轮箍的起重机凸缘导轨轮.
Cranes; flanged crane rail wheels with tyre, with plain bearings, with gear wheel
DIN 15078-1977
起重机.不带齿轮的装有滚子轴承的有法兰的起重机轨道轮
Cranes; flanged crane rail wheels, with roller bearings, without gear wheel
DIN 15079-1977
起重机.带滚柱轴承和齿轮的起重机带凸缘导轨轮
Cranes; flanged crane rail wheels, with roller bearings, with gear wheel
DIN 15080-1977
起重机.带滚柱轴承、无齿轮、带轮箍的起重机凸缘导轨轮
Cranes; flanged crane rail wheels with tyre, with roller bearings, without gear wheel
DIN 15081-1977
起重机.带滚柱轴承、齿轮、带轮箍的起重机带凸缘导轨轮
Cranes; flanged crane rail wheels with tyre, with roller bearings, with gear wheel
DIN 15082-2-1977
起重机.与大齿轮压配合的带滚柱轴承的起重机轨道轮
Cranes; crane rail wheels with roller bearings, pressed-on gear wheels
DIN 15084-1977
起重机.带滚柱轴承起重机导轨轮.轴承盖
Cranes; crane rail wheels with roller bearings, bearing covers
DIN 15086-1977
起重机.装有轴套补偿滚子轴承的起重机轨道轮.
Crane; crane rail wheels with roller bearings, flattening of axle bushes
DIN 15094-1982
起重机.主动轮组和从动轮组.轴承罩环
Cranes; driving wheel units and idler wheel units; bearing cage rings
DIN 15417-1982
起重机.下滑车.带滑动轴承的D型绳索轮
Cranes; bottom blocks; type D rope pulleys with plain bearings
DIN 15418-1-1982
起重机.下滑车.无内套带深槽滚珠轴承的C型绳轮
Cranes; bottom blocks; type C rope pulleys with deep groove ball bearing, without internal sleeve
DIN 15418-2-1982
起重机的下滑车.无内轴套深滚道滚珠轴承的C型绳索滑轮的间隔套
Cranes; bottom blocks; spacer sleeves for type C rope pulleys with deep groove ball bearing, without internal sleeve
DIN 15418-3-1982
起重机的下滑车.无内轴套深滚道滚珠轴承的C型绳索滑轮的油封盖
Cranes; bottom blocks; sealing covers for type C rope pulleys with deep groove ball bearing, without internal sleeve
DIN 15421-1-1982
起重机的下滑车.带深滚道滚珠轴承和内轴套的B型绳索滑轮
Cranes; bottom blocks; type B rope pulleys with deep groove ball bearing and internal sleeve
DIN 15421-2-1982
起重机.下滑车.带深滚道滚珠轴承和内套筒的B型绳索轮的内轴套和隔离套
Cranes; bottom blocks; internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve
DIN 15421-3-1982
起重机.下滑车.带深滚道滚珠轴承和内套筒的B型绳索轮的油封盖
Cranes; bottom blocks; sealing covers for type B rope pulleys with deep groove ball bearing and internal sleeve
DIN 15422-1-1982
起重机.下滑车.带圆柱形滚动轴承和内套筒的A型绳索轮
Cranes; bottom blocks; type A rope pulleys with cylindrical rolling bearing and internal sleeve
DIN 15422-2-1982
起重机.下滑车.带圆柱形滚动轴承和内套筒的A型绳索轮的内轴套和隔离套
Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve
DIN 15422-3-1982
起重机.下滑车.带圆柱形滚动轴承和内套筒的A型绳索轮的油封盖
Cranes; bottom blocks; sealing covers for type A rope pulleys with cylindrical rolling bearing and internal sleeve
DIN 1850-3-1998
关节轴承.第3部分.烧结金属制轴套
Plain bearings - Part 3: Sintermetal bushes
DIN 1850-4-1998
关节轴承.第4部分:人造石墨制轴套
Plain bearings - Part 4: Artificial carbon bushes
DIN 1850-5-1998
关节轴承.第5部分:热固性塑料制轴套
Plain bearings - Part 5: Thermoset plastic bushes
DIN 1850-6-1998
关节轴承.第6部分:热塑塑料制轴套
Plain bearings - Part 6: Thermoplastic bushes
DIN 20553-1989
矿山车用带锥形滚柱轴承的车轮装置.不带弹簧
Wheel sets with taper roller bearings for mine cars; without springs
DIN 20555-1989
矿山车用带锥形滚柱轴承的车轮装置.外部弹簧悬挂装置
Wheel sets with taper roller bearings for mine cars; exterior spring suspension
DIN 20556-1989
矿山车用带锥形滚柱轴承的车轮装置.内部弹簧悬挂装置
Wheel sets with taper roller bearings for mine cars; interior spring suspension
DIN 2083-1-1980
第1部分:铣床心轴用和带纵向键槽的铣刀用轴承座套
Bearing Sleeves for Milling Machine Arbors, for Milling Cutters with Longitudinal Keyway
DIN 24338-2001
液压动力.宽铰节轴承铰节头.尺寸、要求
Fluid power - Rod end spherical eyes - Dimensions, requirements
DIN 24555-1990
流体动力.关节轴承.安装尺寸
Fluidpower; spherical plain bearing; mounting dimensions
DIN 25109-1-1990
市郊短途铁路车辆.外置支撑的轮副用轴箱.圆柱形滚柱轴承的全视图和配置
Suburban railway vehicles; axle boxes for wheel sets with supports at the outer ends; general view and arrangement for cylindrical roller-bearings
DIN 25109-2-1991
郊区铁路车辆.支座设在外端的车轮组轴箱.第2部分:圆柱滚子轴承用部件
Suburban railway vehicles; axle boxes for wheel sets with supports at the outer ends; components for cylindrical roller-bearings
DIN 25687-1-2005
铁路车辆部件的术语.发动机和传动箱用支柱.第1部分:内燃机用的轴承
Terms for railway vehicle parts - Support for engines and transmissions - Part 1: Bearing for internal combustion engines
DIN 25687-2-2005
铁路车辆部件用术语.发动机和传动装置用支架.第2部分:传动装置用轴承
Terms for railway vehicle parts - Support for engines and transmissions - Part 2: Bearing for transmission
DIN 28161-1987
搅拌器传动装置的要求.旋转速度和旋转方向，轴承应用转动精确度，轴密封环的折卸空间
Requirements on agitator drives; agitator speed and direction, bearing application running accuracy, dismounting space for shaft seal
DIN 30910-3-2004
烧结金属材料.烧结金属规范.第3部分:轴承及具有轴承性能的结构件用材料
Sintered metal materials - Sintered-material specifications - Part 3: Materials for bearings and structural parts with bearing properties
DIN 31651-1-1991
滑动轴承.第1部分:分类符号
Plain bearings; systematic, symbols
DIN 31651-2-1991
滑动轴承.第2部分:应用符号
Plain bearings; application, symbols
DIN 31652-1-1983
滑动轴承.设计用于稳定状态使用的流体动力径向滑动轴承.圆滚柱轴承的设计
Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; design of circular cylindrical bearings
DIN 31652-2-1983
滑动轴承.稳态运行条件下设计用流体动力普通径向轴承.第2部分:圆柱体轴承设计的必备功能
Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; functions necessary when designing circular cylindrical bearings
DIN 31652-3-1983
滑动轴承.设计用于稳定状态使用的流体动力径向滑动轴承.圆滚柱轴承设计时需要的使用参数
Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; operational parameters necessary when designing circular cylindrical bearings
DIN 31653-1-1991
滑动轴承.稳定工作条件下液压滑动止推轴承.垫片止推轴承计算
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of pad thrust bearings
DIN 31653-2-1991
滑动轴承.稳定工作条件下液压滑动止推轴承.垫片止推轴承计算函数
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of pad thrust bearings
DIN 31653-3-1991
滑动轴承.稳定工作条件液压滑动止推轴承.垫片止推轴承计算用允许运算参数
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; permissible operational parameters for calculation of pad thrust bearings
DIN 31654-1-1991
滑动轴承.稳定工作条件下流体动力油膜止推轴承.斜垫止推轴承的计算
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of tilting-pad thrust bearings
DIN 31654-2-1991
滑动轴承.稳定工作条件下流体动力油膜止推轴承.斜垫止推轴承运算参数
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of tilting pad thrust bearings
DIN 31654-3-1991
滑动轴承.稳定工作条件下液体动力油膜止推轴承.斜垫止推轴承计算用允许运算参数
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; permissible operational parameters for calculation of pad thrust bearings
DIN 31655-1-1991
滑动轴承.稳定工作条件下液体静压向心滑动轴承.不带排油槽的油润滑滑动轴承的计算
Plain bearings; hydrostatic plain journal bearings under steady-state conditions; calculation of oil-lubricated plain bearings without drainage grooves
DIN 31655-2-1991
滑动轴承.稳定工作条件下静压向心滑动轴承.不带排油槽的油润滑滑动轴承计算用特性值
Plain bearings; hydrostatic plain journal bearings under steady-state conditions; characteristic values for the calculation of oil-lubricated plain bearings without drainage grooves
DIN 31656-1-1991
滑动轴承.稳定工作条件下液体静压向心滑动轴承.带排油槽的油润滑滑动轴承的计算
Plain bearings; hydrostatic plain journal bearings under steady-state conditions; calculation of oil-lubricated plain bearings with drainage grooves
DIN 31656-2-1991
滑动轴承.稳定工作条件下静压向心滑动轴承.带排油槽的油润滑滑动轴承计算用特性值
Plain bearings; hydrostatic plain journal bearings under steady-state conditions; characteristic values for the calculation of oil-lubricated plain bearings with drainage grooves
DIN 31657-1-1996
滑动轴承.稳定工作状态液压径向滑动轴承.第1部分:多层轴承和斜垫止推滑动轴承计算
Plain bearings - Hydrodynamic plain journal bearings under steadystate conditions - Part 1: Calculation of multi-lobed and tilting pad journal bearings
DIN 31657-2-1996
滑动轴承.稳定工作状态液压径向滑动轴承.第2部分:多层滑动轴承计算函数
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of multilobed journal bearings
DIN 31657-3-1996
滑动轴承.稳定工作状态液压径向滑动轴承.第3部分:斜垫止推滑动轴承计算用函数
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Functions for calculation of tilting pad journal bearings
DIN 31657-4-1996
滑动轴承.稳定工作状态中液动滑动轴径轴承.第4部分:计算多瓣和倾斜垫轴径轴承用可允许的操作参数
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings
DIN 31661-1983
滑动轴承.术语、特性和更换、损坏的原因
Plain bearings; terms, characteristics and causes of changes and damages
DIN 31665-1993
滑动轴承.轴承金属的试验.静态应力下使用润滑剂时金属的耐腐蚀性
Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions
DIN 31670-8-1986
滑动轴承.滑动轴承的质量保证.第8部分:轴、轴环和推力环的形位公差和表面粗糙度的检验
Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars
DIN 31690-1990
托架滑动轴承.轴承块
Pedestal plain bearings; block plummer
DIN 31692-1-1996
滑动轴承.第1部分:润滑和润滑监测
Plain bearings - Part 1: Lubrication and lubrication monitoring
DIN 31692-2-1996
滑动轴承.第2部分:温度监测
Plain bearings - Part 2: Temperature monitoring
DIN 31692-3-1996
滑动轴承.第3部分:振动监测
Plain bearings - Part 3: Vibration monitoring
DIN 31692-4-1997
滑动轴承.第4部分:电气绝缘
Plain bearings - Part 4: Electrical insulation
DIN 31692-5-2000
滑动轴承.第5部分:油密封性检验用检查表
Plain bearings - Part 5: Check list for verification of oil tightness
DIN 31693-1990
普通关节轴承.普通托架轴承.侧面法兰轴承
Pedestal plain bearings; side flange bearing
DIN 31694-1990
普通关节轴承.普通托架轴承.中心法兰轴承
Pedestal plain bearings; centre flange bearings
DIN 31696-1978
滑动止推轴承.自位衬垫止推轴承.装配尺寸
Plain Thrust Bearings; Pivoted Pad Thrust Bearings; Fitting Dimensions
DIN 31697-1978
滑动止推轴承.环形止推轴承.装配尺寸
Plain Thrust Bearings; Ring Thrust Bearings; Fitting Dimensions
DIN 31698-1979
滑动轴承.配合
Plain Bearings, Fits
DIN 31699-1986
滑动轴承.轴.轴环.止推环.形状和位置偏差和表面粗糙度
Plain bearings; shafts, collars, thrust collars; geometrical tolerances and surface roughness
DIN 322-1983
关节轴承.一般用途的润滑浮环
Plain bearings; loose lubrication rings for general purposes
DIN 38-1983
滑动轴承.厚壁复式滑动轴承中的轴承金属轴瓦填料
Plain bearings; bearing metal lining for thick-walled multilayer plain bearings
DIN 4000-12 Bb.1-1979
滚柱轴承和滚子元件的产品特性图表
Tabular lay-outs of article characteristics for roller bearings and roller elements; branch standards suitable for application
DIN 4000-12-1994
第12部分:滚动轴承和滚动轴承元件用物品特性表格设计
Tabular layouts of article characteristics for roller bearings and roller elements
DIN 4000-49-1990
第49部分:滑动轴承用物品特性表格设计
Tabular layouts of article characteristics for plain bearings
DIN 42013-1988
小型电动机的球轴承轴向调节用弹簧垫圈
Spring washers for axial adjustment of ball bearings of small motors
DIN 42672-2-1974
B3型设计带滚珠轴承的内冷鼠笼式交流电多相电动机.第2部分:最大的外壳尺寸
Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B3, with ball bearings; maximum envelope dimensions
DIN 42673-2-1983
IMB3型带滚动轴承全密封风扇冷却鼠笼三相感应电机.相关框架尺寸.防爆高安全"E"型输出功率
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
DIN 42673-3-1983
IMB3型带滚动轴承全密封风扇冷却鼠笼三相感应电机.相关框架尺寸.防火外壳"d"型输出功率
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
DIN 42673-4-1974
B3型设计带滚珠轴承的风冷鼠笼式交流电多相电动机.第4部分:最大的外壳尺寸
Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope dimensions
DIN 42676-2-1974
B5型设计带滚珠轴承的内冷鼠笼式交流电多相电动机.第2部分:最大的外壳尺寸
Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B5, with ball bearings; maximum envelope dimensions
DIN 42677-2-1983
带滚动轴承的IM B 5、 IMB10、IMB14型全密封风扇冷却鼠笼式三相感应电机.相关框架规格－提高防护安全性"E"
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"
DIN 42677-3-1983
带滚动轴承的IM B 5、 IMB10、IMB14型全密封风扇冷却鼠笼式三相感应电机.相关框架规格－防火外壳体“d"型的
Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"
DIN 42677-4-1974
B5型、B10型、B14型设计带滚珠轴承的风冷鼠笼式交流电多相电动机.第4部分:B5型、B14型设计的最大外壳尺寸
Totally enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B5, B10, B14, with ball bearings; maximum envelope dimensions for design B5, B14
DIN 42681-1983
表面冷却滑环型间歇运行三相电机.结构型式IMB3.带滚动轴承.安装尺寸和功率配置
Totally enclosed fan-cooled three-phase induction motors with slipring-rotor; type IM B 3, with rolling bearings; mounting dimensions and relationship frame sizes; output ratings for intermittent duty
DIN 42966-1961
电气机械用的连杆式球轴承.公差和径向间隙
Ball bearings, conrad type, for electrical machines; tolerances and radial clearance
DIN 43200-2002
电动机用滚柱轴承.维护.安装.润滑.拆卸.清洗和再使用
Roller bearings for electrical machines of electric vehicles - Preservation, mounting, lubrications, dismounting, cleaning and reutilization
DIN 502-2004
传动元件.用两个螺钉紧固的法兰轴承
Driving Components - Flange bearings - Fastened with two screws
DIN 50280-1975
径向普通关节轴承的运转试验.概述
Running Test on Radial Plain Bearings; General
DIN 50282-1979
滑动轴承.金属耐磨材料的摩擦特性.重要定义
Plain Bearings; The Tribological Behaviour of Metallic Antifriction Materials; Significant Definitions
DIN 503-2004
传动元件.用四个螺钉紧固的法兰轴承
Driving components - Flange bearings - Fastened with four screws
DIN 504-2004
传动元件.套筒轴承
Driving components - Eye-type bearings
DIN 505-2004
传动元件.用两个螺钉紧固的带盖轴承和无盖轴承
Driving components - Cap bearings, half bearings - Fastening with two screws
DIN 506-2004
传动元件.用四个螺钉紧固的带盖轴承和无盖轴承
Driving components - Cap-bearings, half bearings - Fastening with four screws
DIN 51819-1-1999
润滑脂检验.滚柱轴承试验仪FE8中的机械-动脂试验.第1部分:一般工作原理
Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
DIN 51819-2-1999
润滑脂检验.滚柱轴承试验仪FE8中的机械-动载荷试验.第2部分:斜向滚珠轴承或锥形滚柱轴承润滑脂试验方法
Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 2: Test method for lubricating greases, oblique ball bearing or tapered roller bearing
DIN 51819-3-2005
润滑剂的试验.滚柱轴承试验仪FE8中的机械-动态试验.第5部分:轴向滚柱轴承用润滑油的试验方法
Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils, axial cylindrical roller bearing
DIN 51821-1-1988
润滑剂的检验.使用 FAG 滚动轴承润滑脂检验机 FE9 试验.第1部分:一般工作原则
Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9; general working principles
DIN 51821-2-1989
润滑剂的检验.使用 FAG 滚动轴承润滑脂检验机 FE9 试验.第2部分:试验方法 A/1500/6000
Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9; test method A/1500/6000
DIN 5401-2002
滚动轴承.滚动轴承和一般工业用滚珠
Rolling bearings - Balls for rolling bearings and general industrial use
DIN 5402-1-1993
滚动轴承.滚动轴承零件.圆柱形滚柱
Rolling bearings; parts of rolling bearings; cylindrical rollers
DIN 5402-3-1993
滚动轴承.滚动轴承零件.滚针
Rolling bearings; rolling bearing components; needle rollers
DIN 5405-1-1993
滚动轴承.滚针轴承.第1部分:滚针和保持架组件
Rolling bearings; needle roller bearings; needle roller and cage assemblies
DIN 5405-2-1993
滚动轴承.滚针轴承.推力滚针和保持架组件
Rolling bearings; needle roller bearings; thrust needle roller and cage assemblies
DIN 5405-3-1993
滚动轴承.滚针轴承.推力垫片
Rolling bearings; needle roller bearings; thrust washers
DIN 5406-1993
滚动轴承.锁紧垫圈.止动钩安全平垫圈
Rolling bearings; lockwashers; safety plate, lockclip
DIN 5412-1 Aw.1-1982
滚动轴承.单列带壳体的圆柱形滚柱轴承.第1 AW.1部分:分离式止推垫圈的一般工程选择
Rolling bearings; cylindrical roller bearings, single row, with cage; separate thrust collar, a selection for general engineering
DIN 5412-1-2005
滚动轴承.短圆柱滚子轴承.第1部分:单排带保持架、分离式止推环
Rolling bearings - Cylindrical roller bearings - Part 1: Single row with cage, separate thrust collars
DIN 5412-11-2000
滚动轴承.圆柱滚柱轴承.第11部分:铁路车辆轴箱用单列,带保持架滚动轴承
Rolling bearings - Cylindrical roller bearings - Part 11: Single row, with cage, for railway vehicles axle boxes
DIN 5412-4-2000
滚动轴承.圆柱滚柱轴承.第2部分:提高精度的双列,带保持架的滚动轴承.
Rolling bearings - Cylindrical roller bearings - Part 4: Double row, with cage, increased accuracy
DIN 5412-9-1982
滚动轴承.尺寸系列48和49、双列、不可分的、满装型滚柱轴承
Rolling bearings; cylindrical roller bearings, double row, full type roller bearings, non separable; dimension series 48 and 49
DIN 5415-1993
滚动轴承.转接套管
Rolling bearings; adapter sleeves
DIN 5416-1990
滚动轴承.退卸套
Withdrawal sleeves for use with rolling bearings
DIN 5417-1976
滚动轴承用紧固零件.带环槽轴承用挡圈
Securing Parts for Rolling Bearings; Snap Rings for Bearings with Ring Groove
DIN 5418-1993
滚动轴承.安装尺寸
Rolling bearings; dimensions for mounting
DIN 5419-1959
滚动轴承座用毡垫圈.毡带和环形槽
Felt Rings, Felt Strips, Ring Grooves for Rolling Bearing Housings
DIN 5425-1-1984
滚动轴承.安装公差.通用指南
Rolling bearings; mounting tolerances; general guidelines
DIN 5426-1-1995
滚动轴承.滚动轴承的振动噪声.第1部分:结构载振动噪声的测量方法
Rolling bearings - Rolling bearing vibration and noise - Part 1: Methods for measurement of structure-borne noise
DIN 5429-1-2005
滚动轴承.组合式滚针轴承.第1部分:止推滚针轴承、止推滚针球轴承
Rolling bearings - Combined needle roller bearings - Part 1: Needle-thrust roller bearings, needle-thrust ball bearings
DIN 5429-2-2005
滚动轴承.组合式滚针轴承.第2部分:滚针角接触球轴承
Rolling bearings - Combined needle roller bearings - Part 2: Needle angular contact ball bearings
DIN 5569-1-1997
轨道车辆.带滚柱轴承和密封垫圈的外装式轮对轴承.第1部分:综览和配置
Rail vehicles - Externally mounted wheelset-bearings with cylindrical roller bearings and labyrinth-gasket - Part 1: Summary and layout
DIN 5569-2-1997
轨道车辆.带滚柱轴承和密封垫圈的外装式轮对轴承.第2部分:零部件
Rail vehicles - Externally mounted wheelset-bearings with cylindrical roller bearings and labyrinth-gasket - Part 2: Component parts
DIN 5570-1-1990
轨道车辆.带圆柱滚柱轴承的外装轴颈滚柱轴承.综述和设计图
Rail vehicles; externally mounted journal roller bearings cylindrical roller bearings; summary and layout
DIN 5570-2-1990
轨道车辆.带圆柱滚柱轴承的外装轴径滚柱轴承.零组件
Rail vehicles; externally mounted journal roller bearings with cylindrical roller bearings; component parts
DIN 5575-1985
有轨车辆.托运材料用的装有外轴承的负载轴.主要尺寸
Railway vehicles; carrying axles equipped with external bearings for hauled stock; principal dimensions
DIN 611-1990
滚动轴承.标准的概要
Rolling bearings; summary of standards
DIN 615-1993
滚动轴承.磁铁式关节轴承
Rolling bearings; magneto-type ball bearings
DIN 616-2000
滚动轴承.尺寸.一般方案
Rolling bearings - Dimensions - General plan
DIN 617-1993
滚动轴承.带保持架的滚针轴承.尺寸系列48和49
Rolling bearings; needle roller bearings with cage; dimensions series 48 and 49
DIN 618-1-1993
滚针轴承.带封头的轴套、带保持架的带封头的轴套
Needle roller bearings; drawn cups with open ends, drawn cups with closed end, with cage
DIN 618-2-1993
滚针轴承.密封的带保持架的开端头拔出套
Needle roller bearings; drawn cups with open ends with cage, sealed
DIN 620-1-1982
滚动轴承.尺寸公差和转动公差的测量方法
Rolling bearings; Gauging methods for dimensional and running tolerances
DIN 620-2-1988
滚动轴承.滚动轴承公差.径向轴承公差
Rolling bearings; tolerances for rolling bearings; tolerances for radial bearings
DIN 620-3-1982
滚动轴承.止推轴承的公差
Rolling bearings; tolerances for thrust bearings
DIN 620-4-2004
滚动轴承.滚动轴承公差.第4部分:径向内间隙
Rolling bearings - Rolling bearing tolerances - Part 4: Radial internal clearance
DIN 620-6-2004
滚动轴承.滚动轴承公差.第6部分:倒棱尺寸极限
Rolling bearings - Rolling bearing tolerances - Part 6: Chamfer dimension limits
DIN 623-1-1993
滚动轴承.基本原理、名称、标识
Rolling bearings; fundamental principles; designation, marking
DIN 623-2-2000
滚动轴承.基本原理.第2部分:滚动轴承的图样画法
Rolling bearings - Fundamental principles - Part 2: Graphical representation of rolling bearings
DIN 625-1-1989
滚动轴承.单列径向接触滚珠轴承
Rolling bearings; single row radial contact ball bearings
DIN 625-3-1990
滚动轴承.双列向心球轴承
Rolling bearings; double row radial contact ball bearings
DIN 625-4-1987
滚动轴承.带法兰外环的接触槽向心球轴承
Rolling bearings; radial contact groove ball bearings with flanged outer ring
DIN 626-1-1999
滚动轴承.带球形外表面和增加内环宽度的轴承.第1部分:镶嵌轴承
Rolling bearings - Bearings with spherical outside surface and extended inner ring width - Part 1: Insert bearings
DIN 626-2-1999
滚动轴承.带有外球面和加宽内环的轴承.第2部分.轴承箱
Rolling bearings - Bearings with spherical outside surface and extended inner ring width - Part 2: Housings for insert bearings
DIN 628-1-1993
滚动轴承.单列向心推力球轴承
Rolling bearings; angular contact radial ball bearing, single row
DIN 628-3-1993
滚动轴承.带保持架双列向心止推球轴承
Rolling bearings; angular contact ball bearing, double row, with cage
DIN 628-4-1993
滚动轴承.单列向心止推球轴承.四点接触滚动轴承
Rolling bearings; angular contact radial ball bearing, single row; four-point contact bearing
DIN 628-5-1994
滚动轴承.带间隔滚珠的双列向心推力球轴承
Rolling bearings; angular contact radial ball bearing; double row, with spacer balls
DIN 628-6-1999
滚动轴承.角接触径向球型轴承.第6部分:单列,接触角15度和25度
Rolling bearings - Angular contact radial ball bearing - Part 6: Single row, contact angle 15° and 25°
DIN 630-1993
滚动轴承.向心滚珠轴承.带圆柱形和锥形孔的双列轴承
Rolling bearings; self aligning ball bearing; double row with cylindrical and tapered bore
DIN 635-1-1987
滚动轴承.单列自位滚柱轴承
Rolling bearings; single-row self-aligning roller bearings
DIN 635-2-1984
滚动轴承.双列球面滚柱轴承
Rolling bearings; spherical roller bearings, double row
DIN 644-1997
线性滚动轴承.线性轴承导轨.尺寸和公差
Linear rolling bearings - Shaft support rails for linear bearings - Dimensions and tolerances
DIN 645-1-1999
滚动轴承.型面轨滚动导轨.第1部分:系列1至3的尺寸
Rolling bearings - Profile rail rolling guides - Part 1: Dimensions for series 1 to 3
DIN 645-2-1999
滚动轴承.型面轨滚导轨.第2部分:系列4的尺寸
Rolling bearings - Profile rail rolling guides - Part 2: Dimensions for serie 4
DIN 65237-1996
航空航天.双层钢活塞节轴承.交货技术条件.对新设计无效
Aerospace - Spherical plain bearings, steel on steel - Technical specification; inactive for new design
DIN 65298-1988
航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.单接点.连接尺寸.负荷.质量
Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; single joints; connection dimensions, loads, masses
DIN 65299-1988
航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.双万向轴.连接尺寸.负荷.质量
Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses
DIN 65300-1988
航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.技术规范
Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; technical specification
DIN 69001-37-1994
机床.多轴头.A和B型轴承法兰
Machine tools; multi-spindle heads; bearing flanges types A and B
DIN 69001-51-1981
机床.多轴头.A型轴承套
Machine tools; Multi-spindle heads; Bearing bushes Type A
DIN 711-1988
滚动轴承.单向推力球轴承
Rolling bearings; single direction thrust ball bearings
DIN 715-1987
滚动轴承.双向推力球轴承
Rolling bearings; double direction thrust ball bearings
DIN 720 Bb.1-1979
滚动轴承.锥形滚柱轴承DIN和ISO的牌号对照表
Rolling bearings; tapered roller bearings, equivalent list for DIN- and ISO-designations
DIN 720-1979
滚动轴承.锥形滚柱轴承
Rolling Bearings; Tapered Roller Bearings
DIN 722-2005
滚动轴承.止推短圆柱滚子轴承.单向
Rolling bearings - Thrust cylindrical roller bearings - Single direction
DIN 72784-1966
汽车盘式刮水器.刮水器轴承轴套
Windscreen wipers for automobiles; bushing
DIN 728-1991
单向非对称滚子自定心推力轴承
Single direction self-aligning thrust bearings with asymmetric rollers
DIN 736-1984
滚动轴承.直径系列2带锥形孔和紧定套的滚动轴承用带凸台轴承座
Rolling bearings; plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve
DIN 737-1984
滚动轴承.直径系列3带锥形孔和紧定套的滚动轴承用带凸台轴承座
Rolling bearings; plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve
DIN 738-1984
滚动轴承.直径系列2带圆柱形孔的滚动轴承用带凸台轴承座
Rolling bearings; plummer block housings for rolling bearings of diameter series 2 with cylindrical bore
DIN 739-1984
滚动轴承.直径系列3带圆柱形孔的滚动轴承用带凸台轴承座
Rolling bearings; plummer block housings for rolling bearings of diameter series 3 with cylindrical bore
DIN 7473-1983
关节轴承.圆柱形孔整体式厚壁多层关节轴承
Plain bearings; thick-walled multilayer plain bearings with cylindrical bore, undivided
DIN 7474-1983
关节轴承.圆柱形孔分离式厚壁多层关节轴承
Plain bearings; thick-walled multilayer plain bearings with cylindrical bore, divided
DIN 7477-1983
关节轴承.厚壁多层关节轴承腔卸荷
Plain bearings; bore reliefs for thick-walled multilayer plain bearings
DIN 8165-1-1992
FV型整体轴承销式输送机链.单股和双股链（不适用于新结构）
Solid bearing pin type FV conveyor chains; single-strand and double-strand chains (not to be used for new designs)
DIN 8165-2-1992
FV型整体轴承销式输送机链.搭接板（不适用于新结构）
Solid bearing pin type FV conveyor chains; attachment plates (not to be used for new designs)
DIN 8165-3-1992
FVT型整体轴承销式厚板输送机链（不适用于新结构）
Solid bearing pin type FVT conveyor chains with deep plates (not to be used for new designs)
DIN 8221-2004
滑动轴承.符合DIN502、DIN503和DIN504的滑动轴承用轴套
Plain bearings - Bushes for plain bearings according to DIN 502, DIN 503 and DIN 504
DIN 8258-1969
精密机器的轴承钻石.钟表的覆盖宝石
Jewels for fine mechanics; cap jewels for watches
DIN 8261-1972
精密机器的轴承钻石. V形钻石
Jewels for fine mechanics; V-jewels
DIN 8263-1969
精密机构的轴承宝石.扁平式仪器用覆盖宝石
Jewels for fine mechanics; cap jewels for instruments, flat
DIN 8274-1972
精密机构的轴承宝石.电度表用凹面宝石
Jewels for fine mechanics; jewels with concave shape for watthour-meters
DIN 8279-1-1987
第1部分:钟表用扁平轴承套
Bearing bushes for watches and clocks, flat
DIN 87346-1976
人工操作用带传输管道系统的遥控传动装置.轴承
Remote control gear with transmission tubing for manual operation; bearings
DIN 87373-1976
人工操作用带传输管道系统的遥控传动装置.防水导向轴承
Remote control gear with transmission tubing for manual operation; leading-through bearings, watertight
DIN 87382-1980
手动发射管的遥控装置.带可回转冠齿轮的防水的导向槽轴承
Remote control gear with transmission tubing for manual operation; leading-trough bearings with crown gear units slewable, watertight
DIN 9015-1-1986
航空航天.飞机结构的ISO配合(滚柱轴承的安装除外)
Aerospace; ISO-fits for airframe construction (except mounting of roller bearings)
DIN 9015-2-1986
航空航天.发动机结构的ISO配合(滚柱轴承的安装除外)
Aerospace; ISO-fits for engine construction (except mounting of roller bearings)
DIN 95365-1997
弹簧元件.槽轴承.A至K型
Elastomer mounts - Hat mounts - Types A to K
DIN 95366-1996
橡胶-弹簧元件.带和不带保险的罐形轴承.A型至G型
Elastomer mounts - Pot bearings and fail safe pot bearings, types A to G
DIN 981-1993
滚动轴承.锁紧螺母
Rolling bearings; locknuts
DIN EN 12080-1998
铁道应用.轴箱.滚动轴承
Railway applications - Axleboxes - Rolling bearings; German version EN 12080:1998
DIN EN 1337-1-2001
结构轴承.第1部分:通用设计规则
Structural bearings - Part 1: General design rules; German version EN 1337-1:2000
DIN EN 1337-10-2003
结构轴承.第10部分:检验和维修
Structural bearings - Part 10: Inspection and maintenance; German version EN 1337-10:2003
DIN EN 1337-11-1998
建筑业轴承.第11部分:运输、储存和安装
Structural bearings - Part 11: Transport, storage and installation; German version EN 1337-11:1997
DIN EN 1337-2-2004
结构轴承.第2部分:滑动元件
Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004
DIN EN 1337-3-2005
结构轴承.第3部分:弹性轴承
Structural bearings - Part 3: Elastomeric bearings; German version EN 1337-3:2005
DIN EN 1337-4-2004
结构轴承.第4部分:滚柱轴承
Structural bearings - Part 4: Roller bearings; German version EN 1337-4:2004
DIN EN 1337-5-2005
结构轴承.第5部分:锅状轴承
Structural bearings - Part 5: Pot bearings; German version EN 1337-5:2005
DIN EN 1337-6-2004
结构轴承.第6部分:摇杆轴承
Structural bearings - Part 6: Rocker bearings; German version EN 1337-6:2004
DIN EN 1337-7-2004
结构轴承.第7部分:球面和柱面聚四氟乙烯轴承
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German version EN 1337-7:2004
DIN EN 1337-9-1998
建筑业轴承.第9部分:防护
Structural bearings - Part 9: Protection; German version EN 1337-9:1997
DIN EN 2009-1995
航空航天.机体用轴承.钢制刚性单列滚珠轴承.直径系列 8 和直径系列 9.尺寸和负载.新设计停止使用; 德文版本
Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2009:1984
DIN EN 2011-1995
航空航天.机体用轴承.耐腐蚀钢刚性单列滚珠轴承.直径系列 8 和直径系列 9.尺寸和负载.新设计停止使用; 德文
Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 8 and 9 - Dimensions and loads; inactive for new design; German version EN 2011:1984
DIN EN 2012-1995
航空航天.机体用轴承.钢制钢性单列滚珠轴承.直径系列 0 和直径系列 2.尺寸和负载.新设计停止使用; 德文版本
Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2012:1984
DIN EN 2014-1995
航空航天.机体用轴承.耐腐蚀钢刚性单列滚珠轴承.直径系列 0 和直径系列 2.尺寸和负载.新设计停止使用; 德文
Aerospace - Bearings-airframe rolling, rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2014:1984
DIN EN 2015-1995
航空航天.机体用轴承.钢制双列自定心滚珠轴承.直径系列 2.尺寸和负载.新设计停止使用; 德文版本 EN 2015:19
Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2015:1984
DIN EN 2017-1995
航空航天.机体用轴承.耐腐蚀钢双列自定心滚珠轴承.直径系列 2.尺寸和负载.新设计停止使用; 德文版本 EN 201
Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in corrosion resisting steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2017:1984
DIN EN 2018-1995
航空航天.机体用轴承.钢制单列自定心滚柱轴承.直径系列 3 和直径系列 4.尺寸和负载.新设计停止使用; 德文版
Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2018:1984
DIN EN 2020-1995
航空航天.机体用滚动轴承.耐腐蚀钢单列自定心滚柱轴承.直径系列 3 和直径系列 4.尺寸和负载.新设计停止使用
Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in corrosion resisting steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2020:1984
DIN EN 2022-1989
航空航天.轻型系列、带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷
Aerospace; bearings, spherical plain, in corrosion resisting steel, with self-lubricating liner, light series; dimensions and loads
DIN EN 2023-1989
航空航天.公称系列、带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷
Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liner, normal series; dimensions and loads
DIN EN 2063-1995
航空航天系列.机体用滚动轴承.技术规范.新设计停止使用; 德文版本 EN 2063:1992
Aeorspace series - Airframe rolling bearings - Technical specification; inactive for new design; German version EN 2063:1992
DIN EN 2064-1992
航空航天.带润滑衬套的不锈钢关节轴承.技术规范
Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992
DIN EN 2067-1996
航空航天系列.带自动调心球轴承的吊环端头.交货技术条件
Aerospace series - Rod ends with self-aligning ball bearings - Technical specification; German version EN 2067:1996
DIN EN 2068-1996
航空航天系列.带关节轴承和自润滑涂层的吊环端头.交货技术条件
Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996
DIN EN 2079-1995
航空航天系列.仪器和设备用耐蚀钢带法兰的精密滚珠轴承.尺寸和负载; 德文版本 EN 2079:1995
Aerospace series - Bearings, precision ball, with flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 2079:1995
DIN EN 2130-2002
航空航天系列.仪器和设备用耐腐蚀钢精密滚珠轴承.技术规范; 德文版本 EN 2130:2001
Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification; German version EN 2130:2001
DIN EN 2337-1996
航空航天系列.关节轴承.交货技术条件
Aerospace series - Spherical plain bearings - Technical specification; German version EN 2337:1996
DIN EN 2356-1989
航空航天..耐蚀钢制滚动轴承的操纵钢索的带螺纹叉端头.尺寸和负荷
Aerospace series; fork-ends threaded, control cable for rolling bearing in corrosion resisting steel; dimensions and loads
DIN EN 2360-1989
航空航天系列.操纵钢索的不锈钢滚制滚动轴承的挤压连接型叉型端部.尺寸和载荷
Aerospace series; fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable; dimensions and loads
DIN EN 2498-1991
航空航天系列.纹螺杆的自润滑衬层的自校准关节轴承的可调操纵杆端头.尺寸和负荷
Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads
DIN EN 2501-1989
航空航天.宽内环的带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷
Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liners and wide inner ring; dimensions and loads
DIN EN 2584-2002
航空航天系列.带自动润滑内衬的耐腐蚀钢制球面滑动轴承.窄系列:室温下提高的负荷:尺寸和负载; 德文版本 EN
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated loads at ambient temperature; Dimensions and loads; German version EN 2584:2001
DIN EN 2585-2006
航空航天系列.室温条件下高负荷、宽系列、带自润滑衬套的耐蚀钢关节轴承.尺寸和负载
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2001
DIN EN 2588-1988
航空航天.带组装导槽的耐蚀钢制关节轴承.尺寸和负荷
Aerospace series; bearings-spherical plain in corrosion resisting steel with assembly slot; dimensions and loads
DIN EN 3045-1994
航空航天系列.飞机机架滚动轴承.钢制硬性单排滚珠轴承.直径系列0和2.缩小的间隙种类.尺寸和荷载
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3045:1993
DIN EN 3046-1994
航空航天系列.飞机机架滚动轴承.镀镉钢制硬性单排滚珠轴承.直径系列0和2.缩小的间隙种类.尺寸和荷载
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3046:1993
DIN EN 3047-1994
航空航天系列.飞机机架滚动轴承.耐腐蚀钢制硬性单排滚珠轴承.直径系列0和2.缩小的间隙种类.尺寸和荷载
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3047:1993
DIN EN 3048-2006
航空航天系列.室温条件下高负荷、轻系列、带自润滑衬套的耐蚀钢关节轴承.尺寸和负载
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001
DIN EN 3053-1994
航空航天系列轴承.机体用滚动轴承.钢制单列自定心滚柱轴承.尺寸和负载; 德文版本 EN 3053:1994
Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads; German version EN 3053:1994
DIN EN 3054-1994
航空航天.机体用轴承.镀镉钢单列自定心滚柱轴承.尺寸和负载; 德文版本 EN 3054:1994
Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads; German version EN 3054:1994
DIN EN 3055-1994
航空航天.机体用滚动轴承.耐腐蚀钢单列自定心滚柱轴承.尺寸和负载; 德文版本 EN 3055:1994
Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads; German version EN 3055:1994
DIN EN 3056-1994
航空航天系列轴承.机体用轴承.钢制刚性双列滚珠轴承.尺寸和负载; 德文版本 EN 3057:1994
Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994
DIN EN 3057-1994
航空航天系列轴承.机体用轴承.镀镉钢刚性双列滚珠轴承.尺寸和负载; 德文版本 EN 3057:1994
Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads; German version EN 3057:1994
DIN EN 3058-1994
航空航天系列轴承.机体用轴承.耐腐蚀钢刚性双列滚珠轴承.尺寸和负载; 德文版本 EN 3058:1994
Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads; German version EN 3058:1994
DIN EN 3280-1994
航空航天系列.刚性或自定心机体用轴承.技术规范; 德文版本 EN 3280:1994
Aerospace series; bearings, airframe rolling, rigid or self-aligning; technical specification; German version EN 3280:1994
DIN EN 3281-1994
航空航天系列.机体用轴承.钢制刚性单列滚珠轴承.直径系列 8 和 直径系列 9.尺寸和负载; 德文版本 EN 3281:1
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads; German version EN 3281:1994
DIN EN 3282-1994
航空航天系列.机体用轴承.镀镉钢刚性单列滚珠轴承.直径系列 8 和 直径系列 9.尺寸和负载; 德文版本 EN 3282
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads; German version EN 3282:1994
DIN EN 3283-1994
航空航天系列.飞机用滚动轴承.不锈钢单列滚珠轴承.直径系列 8 和 直径系列 9.尺寸和负载; 德文版本 EN 3283
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads; German version EN 3283:1994
DIN EN 3284-1994
航空航天系列.机体用轴承.钢制单列自定心滚珠轴承.直径系列 0 和 直径系列 2.公称公差范畴.尺寸和负载; 德
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3284:1994
DIN EN 3285-1994
航空航天系列.机体用轴承.镀镉钢刚性单列滚珠轴承.直径系列 0 和直径系列 2.公称公差范畴.尺寸和负载; 德文
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3285:1994
DIN EN 3286-1994
航空航天系列.机体用轴承.不锈钢刚性单列滚珠轴承.直径系列 0 和直径系列 2.公称公差范畴.尺寸和负载; 德文
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994
DIN EN 3287-1994
航空航天系列.机体用轴承.钢制双列自定心滚珠轴承.直径系列 2.尺寸和负载; 德文版本 EN 3287:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load; German version EN 3287:1994
DIN EN 3288-1994
航空航天系列.机体用轴承.镀镉钢双列自定心滚珠轴承.直径系列 2.尺寸和负载; 德文版本 EN 3288:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads; German version EN 3288:1994
DIN EN 3289-1994
航空航天系列.机体用轴承.不锈钢双列自定心滚珠轴承.直径系列 0.尺寸和负载; 德文版本 EN 3289:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994
DIN EN 3290-1994
航空航天系列.机体用轴承.钢制单列自定心滚柱轴承.直径系列 3 和 直径系列 4.尺寸和负载; 德文版本 EN 3290
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads; German version EN 3290:1994
DIN EN 3291-1994
航空航天系列.机体用轴承.镀铬钢单列自定心滚柱轴承.直径系列 3 和 直径系列 4.尺寸和负载; 德文版本 EN 32
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads; German version EN 3291:1994
DIN EN 3292-1994
航空航天系列.机体用轴承.不锈钢单列自定心滚柱轴承.直径系列 3 和 直径系列 4.尺寸和负载; 德文版本 EN 32
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994
DIN EN 3446-1995
航空航天系列.仪器和设备用耐蚀钢无法兰的精密滚珠轴承.尺寸和负载; 德文版本 EN 3446:1995
Aerospace series - Bearings, precision ball, without flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 3446:1995
DIN EN 3541-1992
航空航天.带螺纹杆的自调节关节轴承的可调控制杆端部.尺寸、力矩、间隙和负荷
Aerospace series; rod-ends, adjustable, self-aligning ball bearing, with threaded shank; dimensions, torques, clearances and loads; german version EN 3541:1992
DIN EN 733-1995
带轴承座和PN10轴向端口的离心泵.额定功率.主要尺寸、标识系统; 德文版本 EN 733:1995
End-suction centrifugal pumps, rating 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system; German version EN 733:1995
DIN EN ISO 13846-2001
塑料管道系统.热塑承压管用端部荷载轴承和无端部荷载轴承组件和连接件.测定水内压长期密封性的试验方法
Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000
DIN EN ISO 683-17-2000
热处理钢、合金钢和易切钢.第17部分:滚球和滚柱轴承钢
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999); German version EN ISO 683-17:1999
DIN ISO 1002-1985
滚动轴承.飞机用轴承.特性、外形尺寸.公差.额定静载荷
Rolling bearings; airframe bearings; characteristics, boundary dimensions, tolerances, static load ratings
DIN ISO 10285-1994
滚动轴承.米制系列套筒式循环滚珠线性运动的轴承
Rolling bearings; linear motion, recirculating ball, sleeve type; metric series; identical with ISO 10285:1992
DIN ISO 10766-1998
液压流体动力液压缸.活塞和连杆的矩形截面轴承环的壳体尺寸
Hydraulic fluid power, cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:1996)
DIN ISO 10792-2-1996
航空航天.带自动润滑层的耐腐蚀钢制机身球面滑动轴承.第2部分:英制系列
Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series; identical with ISO 10792-2:1995
DIN ISO 10792-3-1996
航空航天.带自动润滑层的耐腐蚀钢制机身球面滑动轴承.第3部分:交货技术条件
Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification; identical with ISO 10792-3:1995
DIN ISO 1132-1-2001
滚动轴承.公差.第1部分:术语和定义
Rolling bearings - Tolerances - Part 1: Terms and definitions (ISO 1132-1:2000)
DIN ISO 12128-1998
滑动轴承.润滑孔、润滑槽和润滑衬套.轴承套的尺寸、类型、命名及应用
Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes; Identical with ISO 12128:1995
DIN ISO 12132-2000
滑动轴承.薄壁轴瓦的质量保证.设计中的失效形式和影响分析（FMEA）
Plain bearings - Quality assurance of thin-walled half-bearings - Design FMEA (ISO 12132:1999)
DIN ISO 12240-1-1999
球面关节轴承.第1部分:球面径向关节轴承
Spherical plain bearing - Part 1: Spherical plain radial bearings (ISO 12240-1:1998)
DIN ISO 12240-2-1999
球面关节轴承.第2部分:角面接触径向关节轴承
Spherical plain bearing - Part 2: Angular contact spherical plain radial bearings (ISO 12240-2:1998)
DIN ISO 12240-3-1999
球面关节轴承.第3部分:止推球面关节轴承
Spherical plain bearing - Part 3: Thrust spherical plain (ISO 12240-3:1998)
DIN ISO 12240-4-1999
球面关节轴承.第4部分:球面关节轴承杆端
Spherical plain bearing - Part 4: Spherical plain bearing rod ends (ISO 12240-4:1998)
DIN ISO 12301-1995
滑动轴承.几何特性和材料质量特性的质量控制技术和检验; 等同采用 ISO 12301:1992
Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics; identical with ISO 12301:1992
DIN ISO 12302-1998
关节轴承.质量特性.统计过程控制(SPC)
Plain bearings - Quality characteristics - Statistical process control (SPC) (ISO 12302:1993)
DIN ISO 12303-1998
关节轴承.质量特性.机器和工作能力的计算
Plain bearings - Quality characteristics - Calculation of machine and process capabilities (ISO 12303:1995)
DIN ISO 12306-1998
关节轴承.薄壁半轴承和薄壁轴承衬的壁厚度的测量
Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes (ISO 12306:1994)
DIN ISO 12307-1-1998
滑动轴承.卷制衬套.第1部分:外径检验
Plain bearings - Wrapped bushes - Part 1: Checking the outside diameter (ISO 12307-1:1994)
DIN ISO 12307-2-2001
滑动轴承.卷制衬套检验.第2部分:内径检验
Plain bearings - Checking of wrapped bushes - Part 2: Checking the inside diameter (ISO 12307-2:2000)
DIN ISO 12308-1998
滑动轴承.质量保证.样品类型.定义、应用和试验
Plain bearings - Quality assurance - Sample types; definitions, applications and testing (ISO 12308:1994)
DIN ISO 13012-1999
滚动轴承.套筒型循环球直线运动球轴承.附件
Rolling bearings - Linear motion, recirculating ball, sleeve type - Accessories (ISO 13012:1998)
DIN ISO 13778-2000
滑动轴承.薄壁轴瓦的质量保证.选配法获得小间隙
Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range (ISO 13778:1999)
DIN ISO 14728-1-2005
滚动轴承.线性运动滚动轴承.第1部分:动态负载额定值和额定寿命
Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life (ISO 14728-1:2004)
DIN ISO 14728-2-2005
滚动轴承.线性运动滚动轴承.第2部分:静态负载额定值
Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings (ISO 14728-2:2004)
DIN ISO 15312-2004
滚动轴承.热速率.计算和系数
Rolling bearings - Thermal speed rating - Calculation and coefficients (ISO 15312:2003)
DIN ISO 281 Bb.1-2003
滚动轴承.动力荷载额定值和额定寿命.寿命修改因素和修改使用寿命额定值的计算
Rolling bearings - Dynamic load ratings and rating life - Life modification factor a<(Index)DIN> and calculation of the modified rating life
DIN ISO 281 Bb.2-1994
滚动轴承.动态承载量和额定寿命.ISO 281/1:1977 的说明注释; 等同采用 ISO/TR 8646:1985
Rolling bearings - Dynamic load ratings and rating life - Explanatory notes on ISO 281/1:1977; identical with ISO/TR 8646:1985
DIN ISO 281 Bb.4-2003
滚动轴承.动荷载额定值和额定寿命.普通荷载滚动轴承修改基准额定寿命的计算方法
Rolling bearings - Dynamic load ratings and rating life - Methods for calculation of the modified reference rating life for universally loaded rolling bearings
DIN ISO 281-1993
滚动轴承.动态荷载额定值和额定寿命
Rolling bearings; dynamic load ratings and rating life; identical with ISO 281:1990
DIN ISO 281/A1-2001
滚动轴承.动载荷等级和额定寿命.修改件1
Rolling bearings - Dynamic load ratings and rating life; Amendment A1 (ISO 281:1990/AMD 1:2000)
DIN ISO 281/A2-2001
滚动轴承.动载荷值和额定寿命.修改件2:寿命改进因子A(指数XYZ)
Rolling bearings - Dynamic load ratings and rating life - Life modification factor a<(Index)xyz>; Amendment A2 (ISO 281:1990/AMD 2:2000)
DIN ISO 3547-1-2000
滑动轴承.卷制轴套.第1部分：尺寸
Plain bearings - Wrapped bushes - Part 1: Dimensions (ISO 3547-1:1999)
DIN ISO 3547-2-2000
滑动轴承.卷制轴套.第2部分:外径和内径试验数据
Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter (ISO 3547-2:1999)
DIN ISO 3547-3-2000
滑动轴承.卷制轴套.第3部分:润滑油孔、油槽和油穴
Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations (ISO 3547-3:1999)
DIN ISO 3547-4-2000
滑动轴承.卷制轴套.第4部分:材料
Plain bearings - Wrapped bushes - Part 4: Materials (ISO 3547-4:1999)
DIN ISO 3548-2001
滑动轴承.带或不带法兰的薄壁轴瓦.尺寸、公差和检验方法
Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test (ISO 3548:1999)
DIN ISO 355-1978
滚动轴承.米制锥形滚柱轴承.外形尺寸和系列代号
Rolling Bearings; Metric Tapered Roller Bearings, Boundary Dimensions and Series Designations
DIN ISO 4378-1-1999
关节轴承.术语、定义和分类.第1部分:设计,轴承材料及其性能
Plain bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties (ISO 4378-1:1997)
DIN ISO 4378-2-1999
关节轴承.术语、定义和分类.第2部分:磨擦和磨损
Plain bearings - Terms, definitions and classification - Part 2: Friction and wear (ISO 4378-2:1983)
DIN ISO 4378-3-1999
关节轴承.术语、定义和分类.第3部分:润滑
Plain bearings - Terms, definitions and classification - Part 3: Lubrication (ISO 4378-3:1983)
DIN ISO 4378-4-1999
关节轴承.术语、定义和分类.第4部分:计算参数及其符号
Plain bearings - Terms, definitions and classification - Part 4: Calculation parameters and their symbol (ISO 4378-4:1997)
DIN ISO 4379-1995
滑动轴承.铜合金衬套; 等同采用 ISO 4379:1993
Plain bearings - Copper alloy bushes; identical with ISO 4379:1993
DIN ISO 4381-2001
滑动轴承.多层滑动轴承用铅锡铸造合金
Plain bearings - Lead and tin casting alloys for multilayer plain bearings (ISO 4381:2000)
DIN ISO 4382-1-1992
滑动轴承.铜合金.单层和多层厚壁滑动轴承用铸铜合金
Plain bearings; copper alloys; cast copper alloys for solid and multilayer thick-walled plain bearings; identical with ISO 4382-1:1991
DIN ISO 4382-2-1992
滑动轴承.单层滑动轴承用锻造铜合金
Plain bearings; copper alloys; wrought copper alloys for solid plain bearings; identical with ISO 4382-2:1991
DIN ISO 4383-2001
滑动轴承.薄壁滑动轴承用复合材料
Plain bearings - Multilayer materials for thin-walled plain bearings (ISO 4383:2000)
DIN ISO 4384-1-2001
滑动轴承.轴承金属硬度试验.第1部分:复合材料
Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials (ISO 4384-1:2000)
DIN ISO 4384-2-1982
滑动轴承.轴承金属的硬度检验.固体材料
Plain bearings; hardness testing of bearing metals; solid materials
DIN ISO 4386-1-1992
滑动轴承.多层金属滑动轴承.结合强度超声波无损检验
Plain bearings; metallic multilayer plain bearings; non-destructive ultrasonic testing of bond; identical with ISO 4386-1:1992
DIN ISO 4386-2-1982
滑动轴承.多层金属滑动轴承.第2部分:厚度大于或等于2mm的轴承金属层的接合处的破坏性试验
Plain bearings; metallic multilayer plain bearings; destructive testing of bond for bearing metal layer thicknesses 2 mm
DIN ISO 4386-3-1992
滑动轴承.多层金属滑动轴承.无损渗透检验
Plain bearings; metallic multilayer plain bearings; non-destructive penetrant testing; identical with ISO 4386-3:1992
DIN ISO 5593-1999
滚动轴承.词汇
Rolling bearings - Vocabulary (ISO 5593:1997)
DIN ISO 6045-1988
造船和海上结构.悬臂起重机鹅颈形起重杆的轴承.组件和部件
Shipbuilding and marine structures; bearings for derrick goosenecks; assemblies and components; identical with ISO 6045, edition 1987
DIN ISO 6279-1979
滑动轴承.整体式滑动轴承用铝合金
Plain Bearings; Aluminium Alloy for Solid Bearings
DIN ISO 6280-1982
关节轴承.薄壁多层关节轴承轴瓦的要求
Plain bearings; requirements on backings for thick-walled multilayer plain bearings
DIN ISO 6282-1985
滑动轴承.金属薄壁轴瓦.δ0.01极限值的测定.等同采用ISO6282－1983年版本
Plain bearings; metallic thin-walled half bearings; determination of the <(Index)0,01><(hoch)*>-limit; identical with ISO 6282, edition 1983
DIN ISO 6524-1995
滑动轴承.薄壁半轴承.周长检验; 等同采用 ISO 6524:1992
Plain bearings - Thin-walled half-bearings - Checking of peripherical length; identical with ISO 6524:1992
DIN ISO 6525-1986
滑动轴承.带材制环形止推垫圈.尺寸和公差..等同采用 ISO 6525-1986
Plain bearings; ring type thrust washers made from strip; dimensions and tolerances; identical with ISO 6525, edition 1983
DIN ISO 6526-1986
滑动轴承.冲压双金属半圆止推垫圈.特性和公差.等同采用ISO 6526-1983版本
Plain bearings; pressed bimetallic half thrust washers; features and tolerances; identical with ISO 6526, edition 1983
DIN ISO 6547-1983
液压流体动力.装有轴承环的活塞密封壳体.尺寸和允公差
Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
DIN ISO 6691-2001
滑动轴承用热塑性聚合物.分类和命名
Thermoplastic for plain bearings - Classification and designation (ISO 6691:2000)
DIN ISO 6811-2001
球面滑动轴承.术语
Spherical plain bearings - Vocabulary (ISO 6811:1998)
DIN ISO 7148-1-2001
滑动轴承.轴承材料摩擦特性试验.第1部分:轴承金属试验
Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals (ISO 7148-1:1999)
DIN ISO 7148-2-2001
滑动轴承.轴承材料摩擦特性试验.第2部分:聚合物轴承材料试验
Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials (ISO 7148-2:1999)
DIN ISO 76 Bb.1-1994
滚动轴承.静态承载量.ISO 281/1:1977 的说明注释; 等同采用 ISO/TR 10657:1991
Rolling bearings - Static load ratings - Explanatory notes to ISO 76; identical with ISO/TR 10657:1991
DIN ISO 76-1988
滚动轴承.静负荷额定值
Rolling bearings; static load ratings; identical with ISO 76:1987
DIN ISO 7905-1-1998
关节轴承.轴承疲劳强度.第1部分:液体润滑条件下在试验台上的和使用中的关节轴承
Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication (ISO 7905-1:1995)
DIN ISO 7905-2-1998
关节轴承.轴承疲劳强度.第2部分:用金属轴承材料圆柱形试样作试验
Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material (ISO 7905-2:1996)
DIN ISO 7905-3-1998
关节轴承.轴承疲劳强度.第3部分:金属复合层轴承材料普通带材的试验
Plain bearings - Bearing fatigue - Part 3: Tests on plain strips of a metallic multilayer bearing material (ISO 7905-3:1996)
DIN ISO 7905-4-1998
关节轴承.轴承疲劳强度.第4部分:金属复合层轴承材料的轴承品的试验
Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996)
DIN ISO 8314-1988
造船和海上结构.跨架轴承和导向支承轴承的耳轴件
Shipbuilding and marine structures; trunnion pieces for span bearings and lead block bearings; identical with ISO 8314, edition 1987
DIN ISO 8826-1-1990
技术制图.滚动轴承.第1部分:通用简化画法
Technical drawings; rolling bearings; part 1: general simplified representation; identical with ISO 8826-1:1989
DIN ISO 8826-2-1995
技术制图.滚动轴承.第2部分:零件简化画法
Technical drawings - Rolling bearings - Part 2: Detailed simplified representation (ISO 8826-2:1994)
DIN V 4141-1-2003
结构轴承.第1部分:设计总则
Structural bearings - Part 1: General design rules
DIN V 4141-13-1994
结构轴承.固定装置和侧边止推轴承.第13部分:设计和建造
Structural bearings - Restraints and side thrust bearings - Design and construction
DIN VDE 0123-1985
通过轨道车辆车轴滚柱轴承的电流流动
Current flow through axle roller bearings of rail vehicles
