云计算实训43——部署k8s基础环境、配置内核模块、基本组件安装

一、前期系统环境准备

1、关闭防火墙与selinux

[root@k8s-master ~]# systemctl stop firewalld[root@k8s-master ~]# systemctl disable firewalldRemoved symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.[root@k8s-master ~]# setenforce 0[root@k8s-master ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux[root@k8s-master ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config

2、配置主机映射

[root@k8s-master ~]# vim /etc/hosts10.0.0.11 k8s-master10.0.0.22 k8s-node0110.0.0.33 k8s-node02
[root@k8s-master ~]# scp /etc/hosts root@10.0.0.22:/etc/hosts[root@k8s-master ~]# scp /etc/hosts root@10.0.0.22:/etc/hosts

3、测试映射效果

[root@k8s-master ~]# ping k8s-node01PING k8s-node01 (10.0.0.22) 56(84) bytes of data.64 bytes from k8s-node01 (10.0.0.22): icmp_seq=1 ttl=64 time=0.346 ms64 bytes from k8s-node01 (10.0.0.22): icmp_seq=2 ttl=64 time=0.265 ms
^C--- k8s-node01 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.265/0.305/0.346/0.044 ms
[root@k8s-master ~]# ping k8s-node02PING k8s-node02 (10.0.0.33) 56(84) bytes of data.64 bytes from k8s-node02 (10.0.0.33): icmp_seq=1 ttl=64 time=0.306 ms64 bytes from k8s-node02 (10.0.0.33): icmp_seq=2 ttl=64 time=0.193 ms
^C--- k8s-node02 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1000ms

4、配置主机间免密登录

[root@k8s-master ~]# ssh-keygen Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa): 
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:pJNP7Nx9pi00P7w8nBNECxdAyHyKPnc6UNaLdXYs6b8 root@k8s-master
The key's randomart image is:+---[RSA 2048]----+|         o oo... |
|          + o o |
|       .. + + + |
|       =. + o B o|
|      +.So o * o |
|       *+.o.= o |
|        ++.+.=o+ |
|         o .*O .|
|           ...+E.|+----[SHA256]-----+[root@k8s-master ~]# ssh-copy-id root@10.0.0.22/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to 
filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are 
prompted now it is to install the new keys
root@10.0.0.22's password: Number of key(s) added: 1Now try logging into the machine, with:   "ssh 'root@10.0.0.22'"and check to make sure that only the key(s) you wanted were added.
[root@k8s-master ~]# ssh-copy-id root@10.0.0.33

5、配置yum源

[root@k8s-master ~]# cd /etc/yum.repos.d/
# docker软件源[root@k8s-master yum.repos.d]# vim docker-ce.repo[docker-ce-stable]name=Docker CE Stable - $basearch
baseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/$basearch/stableenabled=1gpgcheck=1gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-stable-debuginfo]name=DockerCE Stable - Debuginfo $basearch
baseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/debug-$basearch/stableenabled=0gpgcheck=1gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-stable-source]name=DockerCE Stable - Sourcesbaseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/source/stableenabled=0gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-test]name=Docker CE Test - $basearch
baseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/$basearch/testenabled=0gpgcheck=1gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-test-debuginfo]name=DockerCE Test - Debuginfo $basearch
baseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/debug-$basearch/testenabled=0gpgcheck=1gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-test-source]name=DockerCE Test - Sourcesbaseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/source/testenabled=0gpgcheck=1gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-nightly]name=DockerCE Nightly - $basearch
baseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/$basearch/nightlyenabled=0gpgcheck=1gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-nightly-debuginfo]name=DockerCE Nightly - Debuginfo $basearch
baseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/debug-$basearch/nightlyenabled=0gpgcheck=1gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-nightly-source]name=DockerCE Nightly - Sourcesbaseurl=https://mirrors.aliyun.com/dockerce/linux/centos/$releasever/source/nightlyenabled=0gpgcheck=1gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg#K8S软件源[root@k8s-master yum.repos.d]# vim kubernetes.repo [kubernetes]name=Kubernetesbaseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-
x86_64/enabled=1gpgcheck=0repo_gpgcheck=0gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
[root@k8s-master yum.repos.d]# yum clean all && yum makecache[root@k8s-master yum.repos.d]# scp docker-ce.repo 
root@10.0.0.22:/etc/yum.repos.d/
docker-ce.repo                                                   100% 2073   1.9MB/s   00:00    
[root@k8s-master yum.repos.d]# scp kubernetes.repo 
root@10.0.0.22:/etc/yum.repos.d/kubernetes.repo                                                  100%  211   281.2KB/s   00:00 
[root@k8s-master yum.repos.d]# scp docker-ce.repo 
root@10.0.0.33:/etc/yum.repos.d/docker-ce.repo                                                   100% 2073   1.9MB/s   00:00    
[root@k8s-master yum.repos.d]# scp kubernetes.repo 
root@10.0.0.33:/etc/yum.repos.d/kubernetes.repo                                                  100%  211   281.2KB/s   00:00

6、安装必备工具

[root@k8s-master ~]# yum install wget jq psmisc vim net-tools telnet yum-utils 
device-mapper-persistent-data lvm2 git -y

7、关闭swap 分区

[root@k8s-master ~]# swapoff -a && sysctl -w vm.swappiness=0vm.swappiness = 0[root@k8s-master ~]# sed -ri '/^[^#]*swap/s@^@#@' /etc/fstab

8、同步时间

[root@k8s-master ~]# yum -y install ntpdate[root@k8s-master ~]# ntpdate time2.aliyun.com4 Sep 10:08:59 ntpdate[1897]: adjust time server 203.107.6.88 offset 0.007780 
sec
[root@k8s-master ~]# which ntpdate/usr/sbin/ntpdate
[root@k8s-master ~]# crontab -e* 5 * * * /usr/sbin/ntpdate time2.aliyun.com

9、配置 limit

# 单个进程可以打开的⽂件数量将被限制为 65535[root@k8s-master ~]# ulimit -SHn 65535 [root@k8s-master ~]# vim /etc/security/limits.conf 
# 末尾添加如下内容* soft nofile 65536* hard nofile 131072* soft nproc 65535* hard nproc 655350* soft memlock unlimited
* hard memlock unlimited

10、安装 k8s ⾼可⽤性 Git 仓库并重启

# 在 /root/ ⽬录下克隆⼀个名为 k8s-ha-install.git 的 Git 仓库[root@k8s-master ~]# git clone https://gitee.com/dukuan/k8s-ha-install.git正克隆到 'k8s-ha-install'...
remote: Enumerating objects: 920, done.
remote: Counting objects: 100% (8/8), done.
remote: Compressing objects: 100% (6/6), done.
remote: Total 920 (delta 1), reused 0 (delta 0), pack-reused 912接收对象中: 100% (920/920), 19.74 MiB | 1.51 MiB/s, done.处理 delta 中: 100% (388/388), done.
[root@k8s-master ~]# cd k8s-ha-install/[root@k8s-master k8s-ha-install]# lscalico.yaml krm.yaml LICENSE metrics-server-0.3.7 metrics-server-3.6.1 
README.md
[root@k8s-master k8s-ha-install]# reboot

二、配置内核模块

1、配置ipvs模块

[root@k8s-master ~]# yum install ipvsadm ipset sysstat conntrack libseccomp -
y
# 使⽤ modprobe 命令加载内核模块，核⼼ IPVS 模块。[root@k8s-master ~]# modprobe -- ip_vs
# IPVS 负载均衡算法 rr。[root@k8s-master ~]# modprobe -- ip_vs_rr
# IPVS 负载均衡算法 wrr[root@k8s-master ~]# modprobe -- ip_vs_wrr
# ⽤于源端负载均衡的模块[root@k8s-master ~]# modprobe -- ip_vs_sh
# ⽤于⽹络流量过滤和跟踪的模块[root@k8s-master ~]# modprobe -- nf_conntrack
# 在系统启动时加载下列 IPVS 和相关功能所需的模块[root@k8s-master ~]# find / -name "ipvs.config"[root@k8s-master ~]# vim /etc/modules-load.d/ipvs.configip_vs # 负载均衡模块ip_vs_lc # ⽤于实现基于连接数量的负载均衡算法ip_vs_wlc # ⽤于实现带权重的最少连接算法的模块ip_vs_rr # 负载均衡rr算法模块ip_vs_wrr # 负载均衡wrr算法模块ip_vs_lblc # 负载均衡算法，它结合了最少连接（LC）算法和基于偏置的轮询（Round Robin with Bias）算法ip_vs_lblcr # ⽤于实现基于链路层拥塞状况的最少连接负载调度算法的模块ip_vs_dh # ⽤于实现基于散列（Hashing）的负载均衡算法的模块ip_vs_sh # ⽤于源端负载均衡的模块
ip_vs_fo # ⽤于实现基于本地服务的负载均衡算法的模块ip_vs_nq # ⽤于实现NQ算法的模块ip_vs_sed # ⽤于实现随机早期检测（Random Early Detection）算法的模块ip_vs_ftp # ⽤于实现FTP服务的负载均衡模块ip_vs_sh
nf_conntrack # ⽤于跟踪⽹络连接的状态的模块ip_tables # ⽤于管理防护墙的机制ip_set# ⽤于创建和管理IP集合的模块xt_set # ⽤于处理IP数据包集合的模块，提供了与iptables等⽹络⼯具的接⼝ipt_set # ⽤于处理iptables规则集合的模块ipt_rpfilter # ⽤于实现路由反向路径过滤的模块ipt_REJECT # iptables模块之⼀，⽤于将不符合规则的数据包拒绝，并返回特定的错误码ipip # ⽤于实现IP隧道功能的模块，使得数据可以在两个⽹络之间进⾏传输[root@k8s-master ~]# sysctl --system* Applying /usr/lib/sysctl.d/00-system.conf ...
* Applying /usr/lib/sysctl.d/10-default-yama-scope.conf ...
kernel.yama.ptrace_scope = 0* Applying /usr/lib/sysctl.d/50-default.conf ...
kernel.sysrq = 16kernel.core_uses_pid = 1net.ipv4.conf.default.rp_filter = 1net.ipv4.conf.all.rp_filter = 1net.ipv4.conf.default.accept_source_route = 0net.ipv4.conf.all.accept_source_route = 0net.ipv4.conf.default.promote_secondaries = 1net.ipv4.conf.all.promote_secondaries = 1fs.protected_hardlinks = 1fs.protected_symlinks = 1* Applying /etc/sysctl.d/99-sysctl.conf ...
* Applying /etc/sysctl.conf ...# 开机⾃启systemd默认提供的⽹络管理服务[root@k8s-master ~]# systemctl enable systemd-modules-load.service[root@k8s-master ~]# systemctl start systemd-modules-load.service
# 查看已写⼊加载的模块[root@k8s-master ~]# lsmod | grep -e ip_vs -e nf_conntrackip_vs_sh               12688  0 
ip_vs_wrr              12697  0 
ip_vs_rr               12600  0 
ip_vs                 141432  6 ip_vs_rr,ip_vs_sh,ip_vs_wrr
nf_conntrack          133053  1 ip_vs
libcrc32c              12644  3 xfs,ip_vs,nf_conntrack

2、配置k8s内核

# 写⼊k8s所需内核模块[root@k8s-master ~]# vim /etc/sysctl.d/k8s.confnet.bridge.bridge-nf-call-iptables = 1# 控制⽹络桥接与iptables之间的⽹络转发⾏为net.bridge.bridge-nf-call-ip6tables = 1# ⽤于控制⽹络桥接（bridge）的IP6tables过滤规则。当该参数设置为1时，表示启⽤对⽹络桥接的IP6tables过滤规则fs.may_detach_mounts = 1# ⽤于控制⽂件系统是否允许分离挂载，1表示允许net.ipv4.conf.all.route_localnet = 1# 允许本地⽹络上的路由。设置为1表示允许，设置为0表示禁⽌。vm.overcommit_memory=1# 控制内存分配策略。设置为1表示允许内存过量分配，设置为0表示不允许。vm.panic_on_oom=0# 决定当系统遇到内存不⾜（OOM）时是否产⽣panic。设置为0表示不产⽣panic，设置为1表示产⽣panic。fs.inotify.max_user_watches=89100# inotify可以监视的⽂件和⽬录的最⼤数量。fs.file-max=52706963# 系统级别的⽂件描述符的最⼤数量。fs.nr_open=52706963# 单个进程可以打开的⽂件描述符的最⼤数量。net.netfilter.nf_conntrack_max=2310720# ⽹络连接跟踪表的最⼤⼤⼩。net.ipv4.tcp_keepalive_time = 600# TCP保活机制发送探测包的间隔时间（秒）。net.ipv4.tcp_keepalive_probes = 3# TCP保活机制发送探测包的最⼤次数。net.ipv4.tcp_keepalive_intvl =15# TCP保活机制在发送下⼀个探测包之前等待响应的时间（秒）。net.ipv4.tcp_max_tw_buckets = 36000# TCP TIME_WAIT状态的bucket数量。net.ipv4.tcp_tw_reuse = 1# 允许重⽤TIME_WAIT套接字。设置为1表示允许，设置为0表示不允许。net.ipv4.tcp_max_orphans = 327680# 系统中最⼤的孤套接字数量。net.ipv4.tcp_orphan_retries = 3# 系统尝试重新分配孤套接字的次数。net.ipv4.tcp_syncookies = 1# ⽤于防⽌SYN洪⽔攻击。设置为1表示启⽤SYN cookies，设置为0表示禁⽤。net.ipv4.tcp_max_syn_backlog = 16384# SYN连接请求队列的最⼤⻓度。net.ipv4.ip_conntrack_max = 65536# IP连接跟踪表的最⼤⼤⼩。net.ipv4.tcp_max_syn_backlog = 16384# 系统中最⼤的监听队列的⻓度。net.ipv4.tcp_timestamps = 0# ⽤于关闭TCP时间戳选项。net.core.somaxconn = 16384# ⽤于设置系统中最⼤的监听队列的⻓度# 保存后，所有节点重启，保证重启后内核依然加载[root@k8s-master ~]# lsmod | grep --color=auto -e ip_vs -e nf_conntrackip_vs_sh               12688  0 
ip_vs_wrr              12697  0 
ip_vs_rr               12600  0 
ip_vs                 141432  6 ip_vs_rr,ip_vs_sh,ip_vs_wrr
nf_conntrack          133053  1 ip_vs
libcrc32c              12644  3 xfs,ip_vs,nf_conntrack

三、基本组件安装

1、安装 Containerd

1）安装 Docker

# 卸载之前的containerd[root@k8s-master ~]# yum remove -y podman runc containerd
# 安装Docker和containerd[root@k8s-master ~]# yum install containerd.io docker-ce dockerce-cli -y

2）配置 Containerd 所需模块

[root@k8s-master ~]# cat <<EOF | sudo tee /etc/modules-load.d/containerd.conf> overlay
> br_netfilter
> EOF
overlay # ⽤于⽀持Overlay⽹络⽂件系统的模块，它可以在现有的⽂件系统之上创建叠加层，以实现
虚拟化、隔离和管理等功能。br_netfilter # ⽤于containerd的⽹络过滤模块，它可以对进出容器的⽹络流量进⾏过滤和管理。[root@k8s-master ~]# cat /etc/modules-load.d/containerd.conf overlay
br_netfilter
[root@k8s-master ~]# modprobe -- overlay[root@k8s-master ~]# modprobe -- br_netfilter

3）配置 Containerd 所需内核

[root@k8s-master ~]# vim /etc/sysctl.d/99-kubernetes-cri.confnet.bridge.bridge-nf-call-iptables  = 1 # ⽤于控制⽹络桥接是否调⽤iptables进⾏包过滤和转发。net.ipv4.ip_forward                 = 1 # 路由转发，1为开启net.bridge.bridge-nf-call-ip6tables = 1 # 控制是否在桥接接⼝上调⽤IPv6的iptables进⾏数据包过滤和转发。[root@k8s-master ~]# sysctl --system

4）Containerd 配置⽂件

[root@k8s-master ~]# mkdir -p /etc/containerd
# 读取containerd的配置并保存到/etc/containerd/config.toml[root@k8s-master ~]# containerd config default | tee 
/etc/containerd/config.toml[root@k8s-master ~]# vim /etc/containerd/config.toml 
# 找到第63行修改为sandbox_image = "registry.cnhangzhou.aliyuncs.com/google_containers/pause:3.9"
#
找到containerd.runtimes.runc.options模块，添加SystemdCgroup = false，如果已经存
在则直接修改（在第127行）# 添加sandbox_image = "registry.cnhangzhou.aliyuncs.com/google_containers/pause:3.9"（第128行）

# 加载systemctl控制脚本[root@k8s-master ~]# systemctl daemon-reload
# 启动containerd并设置开机启动[root@k8s-master ~]# systemctl start containerd.service[root@k8s-master ~]# systemctl enable containerd.serviceCreated symlink from /etc/systemd/system/multiuser.target.wants/containerd.serviceto 
/usr/lib/systemd/system/containerd.service.

5）配置 crictl 客户端连接的运⾏位置

# 配置容器运⾏环境的crictl.yml⽂件[root@k8s-master ~]# vim /etc/crictl.yamlruntime-endpoint: unix:///run/containerd/containerd.sock # 指定了容器运⾏时的地址为：unix://...image-endpoint: unix:///run/containerd/containerd.sock # 指定了镜像运⾏时的地址为：unix://...timeout: 10 # 设置了超时时间为10秒debug: false # 关闭调试模式

2、安装 Kubernetes 组件

# 安装 Kubeadm、Kubelet 和 Kubectl
# 查询最新的Kubernetes版本号[root@k8s-master ~]# yum list kubeadm.x86_64 --showduplicates | sort -r
# 安装1.28最新版本kubeadm、kubelet和kubectl[root@k8s-master ~]# yum install kubeadm-1.28* kubelet-1.28* kubectl-1.28* -y[root@k8s-master ~]# systemctl daemon-reload
# 允许开机⾃启kubelet[root@k8s-master ~]# systemctl enable --now kubelet
# 查看当前安装的kubeadm版本号[root@k8s-master ~]# kubeadm versionkubeadm version: &version.Info{Major:"1", Minor:"28", GitVersion:"v1.28.2", 
GitCommit:"89a4ea3e1e4ddd7f7572286090359983e0387b2f", GitTreeState:"clean", 
BuildDate:"2023-09-13T09:34:32Z", GoVersion:"go1.20.8", Compiler:"gc", 
Platform:"linux/amd64"}

3、Kubernetes 集群初始化

1）Kubeadm 配置⽂件

# 修改kubeadm配置⽂件[root@k8s-master ~]# vim kubeadm-config.yamlapiVersion: kubeadm.k8s.io/v1beta3# 指定Kubernetes配置文件的版本，使用的是kubeadm API的v1beta3版本bootstrapTokens:# 定义bootstrap tokens的信息。这些tokens用于在Kubernetes集群初始化过程中进行身份验证- groups:# 定义了与此token关联的组- system:bootstrappers:kubeadm:default-node-tokentoken: 7t2weq.bjbawausm0jaxury# bootstrap token的值ttl: 24h0m0s# token的生存时间，这里设置为24小时usages:# 定义token的用途- signing# 数字签名- authentication# 身份验证kind: InitConfiguration# 指定配置对象的类型，InitConfiguration：表示这是一个初始化配置localAPIEndpoint:# 定义本地API端点的地址和端口advertiseAddress: 192.168.15.11bindPort: 6443nodeRegistration:# 定义节点注册时的配置criSocket: unix:///var/run/containerd/containerd.sock# 容器运行时(CRI)的套接字路径name: k8s-master# 节点的名称taints:              # 标记- effect: NoSchedule # 免调度节点key: node-role.kubernetes.io/control-plane         # 该节点为控制节点---apiServer:# 定义了API服务器的配置certSANs:# 为API服务器指定了附加的证书主体名称(SAN)，指定IP即可- 192.168.15.11timeoutForControlPlane: 4m0s# 控制平面的超时时间，这里设置为4分钟apiVersion: kubeadm.k8s.io/v1beta3# 指定API Server版本certificatesDir: /etc/kubernetes/pki# 指定了证书的存储目录clusterName: kubernetes# 定义了集群的名称为"kubernetes"controlPlaneEndpoint: 192.168.15.11:6443# 定义了控制节点的地址和端口controllerManager: {}# 控制器管理器的配置，为空表示使用默认配置etcd:# 定义了etcd的配置local:# 本地etcd实例dataDir: /var/lib/etcd# 数据目录imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers# 指定了Kubernetes使用的镜像仓库的地址，阿里云的镜像仓库。kind: ClusterConfiguration# 指定了配置对象的类型，ClusterConfiguration：表示这是一个集群配置kubernetesVersion: v1.28.2# 指定了kubernetes的版本networking:# 定义了kubernetes集群网络设置dnsDomain: cluster.local# 定义了集群的DNS域为：cluster.localpodSubnet: 172.16.0.0/16# 定义了Pod的子网serviceSubnet: 10.96.0.0/16# 定义了服务的子网scheduler: {}# 使用默认的调度器行为# 将旧的kubeadm配置⽂件转换为新的格式[root@k8s-master ~]# kubeadm config migrate --old-config kubeadm-config.yaml 
--new-config new.yaml[root@k8s-master ~]# vim new.yaml
# 修改第12行、24行、29行的ip地址为自己本机的ip地址

2）下载组件镜像

# 通过新的配置⽂件new.yaml从指定的阿⾥云仓库拉取kubernetes组件镜像[root@k8s-master ~]# kubeadm config images pull --config /root/new.yaml [config/images] Pulled registry.cnhangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.28.2
[config/images]Pulled registry.cnhangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.28.2
[config/images]Pulled registry.cnhangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.28.2
[config/images]Pulled registry.cnhangzhou.aliyuncs.com/google_containers/kube-proxy:v1.28.2
[config/images]Pulled registry.cnhangzhou.aliyuncs.com/google_containers/pause:3.9
[config/images]Pulled registry.cnhangzhou.aliyuncs.com/google_containers/etcd:3.5.9-0
[config/images]Pulled registry.cnhangzhou.aliyuncs.com/google_containers/coredns:v1.10.1

3）集群初始化

[root@k8s-master ~]# kubeadm init --config /root/new.yaml --upload-certs
# 等待初始化后保存这些命令# 当需要加⼊新node节点时，只复制这执行即可[root@k8s-master ~]# vim token.txtkubeadm join 10.0.0.200:6443 --token 7t2weq.bjbawausm0jaxury --discoverytoken-ca-cert-hashsha256:92191cb8741805ac561c5781d936f60a44a3233740209abf6e64738bfecd4c5e# 当需要⾼可⽤master集群时，将整个token复制下来--control-plane --certificate-key 
f9984be15f98141b212efa176c7a49fcda982888f8869b7cc668e661982cbcc0

4）初始化错误解决

错误信息显示本机内存不够，cpu数量不够，我们现在将本机内存提到4个G，cpu数量提到4个注意要关闭本主机然后进行修改主机配置的操作

[root@k8s-master ~]# kubeadm init --config /root/new.yaml --upload-certs

错误信息显示需要修改配置文件/proc/sys/net/ipv4/ip_forward
[root@k8s-master ~]# echo 1 > /proc/sys/net/ipv4/ip_forward[root@k8s-master ~]# kubeadm init --config /root/new.yaml --upload-certs

# 检查kubelet为运行状态[root@master ~]# systemctl status kubeletActive: active (running) since 五 2024-09-06 17:33:30 CST; 5min ago# 可能是配置文件的地址没有改，所以找不到主机，所以超时[root@k8s-master ~]# vim new.yaml
# 修改第12行、24行、29行的ip地址为自己本机的ip地址# 初始化重置[root@k8s-master ~]# kubeadm reset -f ; ipvsadm --clear ; rm -rf ~/.kube[root@k8s-master ~]# kubeadm init --config /root/new.yaml --upload-certs

5）加载环境变量

[root@k8s-master ~]# vim /root/.bashrcexport KUBECONFIG=/etc/kubernetes/admin.conf
[root@k8s-master ~]# source /root/.bashrc

6）查看组件容器状态

之前采⽤初始化安装⽅式，所有的系统组件均以容器的⽅式运⾏并且在 kube-system 命名空间内，此时可以查看 Pod（容器组）状态

[root@k8s-master ~]# kubectl get po -n kube-systemNAME                                 READY   STATUS   RESTARTS   AGE
coredns-6554b8b87f-2jslr             0/1     Pending   0         10m
coredns-6554b8b87f-mmgbd             0/1     Pending   0         10m
etcd-k8s-master                      1/1     Running   0         10m
kube-apiserver-k8s-master            1/1     Running   0         10m
kube-controller-manager-k8s-master   1/1     Running   3         10m
kube-proxy-tvk64                     1/1     Running   0         10m
kube-scheduler-k8s-master            1/1     Running   3         10m# kubectl：k8s控制命令# get：获取参数# po：pod缩写# -n：指定命名空间# kube-system：命名空间

4、Token 过期处理

注意：以下步骤是上述初始化命令产⽣的 Token 过期了才需要执⾏以下步骤，如果没有过期不需要执⾏，直接 join 即可。

Token 过期后⽣成新的 token

kubeadm token create --print-join-command

Master 需要⽣成 --certificate-key：

kubeadm init phase upload-certs  --upload-certs

5、Node 节点配置

Node 节点上主要部署公司的⼀些业务应⽤，⽣产环境中不建议 Master 节点部署系统组件之外的其他 Pod，测试环境可以允许 Master 节点部署 Pod 以节省系统资源。

1）查看集群信息

[root@k8s-master ~]# kubectl get nodeNAME         STATUS     ROLES           AGE   VERSION
k8s-master   NotReady   control-plane   25s   v1.28.2

2）node 结点基础环境配置

[root@node01 ~]# systemctl stop firewalld[root@node01 ~]# systemctl disable firewalldRemoved symlink /etc/systemd/system/multiuser.target.wants/firewalld.service.
Removedsymlink /etc/systemd/system/dbusorg.fedoraproject.FirewallD1.service.
[root@node01~]# setenforce 0[root@node01 ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' 
/etc/sysconfig/selinux[root@node01 ~]# sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' 
/etc/selinux/config[root@node01 ~]# vim /etc/hosts[root@node01 ~]# ls /etc/yum.repos.d/CentOS-Base.repo epel.repo         hh.repo         repo.tar.gz
docker-ce.repo   epel-testing.repo kubernetes.repo
[root@node01 ~]# yum clean all && yum makecache
[root@node01 ~]# yum install wget jq psmisc vim net-tools telnet yum-utils 
device-mapper-persistent-data lvm2 git -y[root@k8s-master ~]# scp /etc/modules-load.d/containerd.conf 
root@10.0.0.250:/etc/modules-load.d/containerd.conf [root@node01 ~]# vim /etc/modules-load.d/containerd.conf[root@node01 ~]# modprobe -- br_netfilter[root@node01 ~]# modprobe -- overlay[root@k8s-master ~]# scp /etc/sysctl.d/99-kubernetes-cri.conf 
root@10.0.0.250:/etc/sysctl.d/99-kubernetes-cri.conf [root@node01 ~]# vim /etc/sysctl.d/99-kubernetes-cri.conf[root@node01 ~]# sysctl --system[root@k8s-master ~]# scp /etc/containerd/config.toml 
root@10.0.0.250:/etc/containerd/config.toml [root@node01 ~]# vim /etc/containerd/config.toml[root@node01 ~]# systemctl enable --now containerd [root@node01 ~]# cat > /etc/crictl.yaml <<EOF> runtime-endpoint: unix:///run/containerd/containerd.sock
> image-endpoint: unix:///run/containerd/containerd.sock
> timeout: 10> debug: false> EOF
root@node01 ~]# systemctl status containerdActive: active (running) since 五 2024-09-06 21:41:46 CST; 2min 13s ago
[root@node01 ~]# yum install kubeadm-1.28* kubelet-1.28* kubectl-1.28* -y[root@node01 ~]# systemctl daemon-reload[root@node01 ~]# systemctl enable --now kubelet[root@node01 ~]# systemctl status kubelet[root@node01 ~]# yum -y install ntpdate[root@node01 ~]# ntpdate time2.aliyun.com[root@node01 ~]# crontab -e* 5 * * * /usr/sbin/ntpdate time2.aliyun.com
[root@node01 ~]# ulimit -SHn 65535[root@k8s-master ~]# scp /etc/security/limits.conf 
root@10.0.0.250:/etc/security/limits.conf[root@node01 ~]# vim /etc/security/limits.conf[root@k8s-master ~]# scp /etc/sysctl.d/k8s.conf 
root@10.0.0.250:/etc/sysctl.d/k8s.con[root@node01 ~]# vim /etc/sysctl.d/k8s.conf[root@node01 ~]# yum install docker-ce docker-ce-cli containerd.io -y

# node01通过复制master初始化⽣成的token来加⼊集群[root@node01 ~]# kubeadm join 10.0.0.200:6443 --token 7t2weq.bjbawausm0jaxury 
--discovery-token-ca-cert-hash 
sha256:92191cb8741805ac561c5781d936f60a44a3233740209abf6e64738bfecd4c5e

[root@node01 ~]# swapoff -a && sysctl -w vm.swappiness=0[root@node01 ~]# echo 1 > /proc/sys/net/ipv4/ip_forward

[root@k8s-master ~]# kubeadm token create --print-join-commandkubeadm join 10.0.0.200:6443 --token mwq6bb.h4eqdzp5vjyhe4iy --discoverytoken-ca-cert-hashsha256:92191cb8741805ac561c5781d936f60a44a3233740209abf6e64738bfecd4c5e 
[root@node01 ~]# kubeadm join 10.0.0.200:6443 --token mwq6bb.h4eqdzp5vjyhe4iy 
--discovery-token-ca-cert-hash 
sha256:92191cb8741805ac561c5781d936f60a44a3233740209abf6e64738bfecd4c5e

[root@k8s-master ~]# kubectl get nodeNAME         STATUS     ROLES           AGE   VERSION
k8s-master   NotReady   control-plane   24h   v1.28.2
node01       NotReady   <none>         68s   v1.28.2

3）查看集群状态

master 上查看集群状态（NotReady 不影响）

# 获取所有节点信息[root@k8s-master ~]# kubectl get node NAME         STATUS     ROLES           AGE   VERSION
k8s-master   NotReady   control-plane   24h   v1.28.2
node01       NotReady   <none>         68s   v1.28.2

到此建议打快照

6、Calico 组件安装

1）切换 git 分⽀

[root@k8s-master ~]# cd k8s-ha-install/[root@k8s-master k8s-ha-install]# lscalico.yaml krm.yaml LICENSE metrics-server-0.3.7 metrics-server-3.6.1 
README.md
[root@k8s-master k8s-ha-install]# git checkout manual-installation-v1.28.x分支 manual-installation-v1.28.x 设置为跟踪来自 origin 的远程分支 manualinstallation-v1.28.x。
切换到一个新分支
'manual-installation-v1.28.x'

2）修改 Pod ⽹段

[root@k8s-master k8s-ha-install]# cd calico/
# 获取已定义的Pod⽹段[root@k8s-master calico]# POD_SUBNET=`cat /etc/kubernetes/manifests/kubecontroller-manager.yaml| grep cluster-cidr= | awk -F= '{print $NF}'` [root@k8s-master calico]# echo $POD_SUBNET172.16.0.0/16# 修改calico.yml⽂件中的pod⽹段[root@k8s-master calico]# sed -i "s#POD_CIDR#${POD_SUBNET}#g" calico.yaml
# 创建calico的pod[root@k8s-master calico]# kubectl apply -f calico.yaml

3）查看容器和节点状态

[root@k8s-master calico]# kubectl get po -n kube-system

[root@k8s-master calico]# kubectl get nodeNAME         STATUS     ROLES           AGE   VERSION
k8s-master   NotReady   control-plane   24h   v1.28.2
node01       NotReady   <none>         20m   v1.28.2
[root@k8s-master calico]# kubectl describe po -n kube-system calico