新的交换机使用admin/admin登录进去，然后开始配置

基础配置

<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C]]sysname openstack-sw01[openstack-sw01]user-interface aux 0
[openstack-sw01-line-aux0]authentication-mode password
[openstack-sw01-line-aux0]set authentication password simple 密码

配置vlan

<openstack-sw01>system-view
[openstack-sw01-vlan2]vlan 2
[openstack-sw01-vlan3]vlan 3
[openstack-sw01-vlan3]vlan 4 to 20
[openstack-sw01-Vlan-interface2]interface Vlan-interface 2
[openstack-sw01-Vlan-interface2]ip address 192.168.10.1 24

加入端口

[openstack-sw01-vlan2]vlan 2
[openstack-sw01-vlan2]port GigabitEthernet 1/0/2
[openstack-sw01-vlan2]port GigabitEthernet 1/0/3 to GigabitEthernet 1/0/10

配置trunk

[openstack-sw01]interface GigabitEthernet 1/0/1[openstack-sw01-GigabitEthernet1/0/1]port link-type trunk[openstack-sw01-GigabitEthernet1/0/1]port trunk permit vlan 2
[openstack-sw01-GigabitEthernet1/0/1]port trunk permit vlan 3

查看命令

[openstack-sw01]display current-configuration
[openstack-sw01]display saved-configuration
[openstack-sw01]display interface GigabitEthernet 1/0/1
[openstack-sw01]display vlan 2
[openstack-sw01]display version

删除（原命令前加undo）

[openstack-sw01]undo vlan 2

保存(不保存的话断电配置还原)

[openstack-sw01]save

配置web访问

[H3C]ip https enable
[H3C]local-user admin
[H3C-luser-manage-admin]servi
[H3C-luser-manage-admin]service-type telnet
[H3C-luser-manage-admin]password simple ${password}
[H3C-luser-manage-admin]exit
[H3C]super password role level-3 simple ${super_password}

通过任意vlan的管理ip可以登录web页面

重置console密码

链接好console口，打开终端，重启交换机，一直按ctrl+B，进入恢复模式，输入7，y启动跳过启动高配置文件，输入0重启，重启后跳过启动配置文件，这时不需要密码可以登录交换机

<H3C>dir
Directory of flash:0 -rw-      220684 Jan 01 2013 00:00:00   defaultfile.zip1 drw-           - Jan 01 2013 00:00:14   diagfile2 -rw-         735 Jan 01 2013 14:08:26   hostkey3 -rw-        1569 Jan 01 2013 14:04:38   ifindex.dat4 drw-           - Jan 02 2013 00:00:14   logfile5 drw-           - Jan 01 2013 00:00:28   pki6 -rw-     5799936 Jan 01 2013 00:00:00   s5000e_x-cmw710-boot-r6126p20.bin7 -rw-    43059200 Jan 01 2013 00:00:00   s5000e_x-cmw710-system-r6126p20.bin8 drw-           - Jan 01 2013 00:00:14   seclog9 -rw-         591 Jan 01 2013 14:08:27   serverkey10 -rw-        5197 Jan 01 2013 14:04:39   startup.cfg11 -rw-      124780 Jan 01 2013 14:04:39   startup.mdb251904 KB total (202548 KB free)<H3C>copy startup.cfg start_bak.cfg

准备一个tftp服务器，与交换机相连，交换机vlan1 ip和tftp ip配置在同一个网段，备份startup.cfg

<H3C>tftp 10.10.12.23 startup.cfg #将启动配置文件拷贝到tftp服务器

在tftp服务器对该文件进行编辑

local-user admin class managepassword hash $h$6$9+/iB9Ns8uphS3uj$YxSSy+fVNrbXnwYrPzdh4Q9HAyZjUNhigVfQ3grO1zj0B9M1gcQFAKSYCP/SnPpRiPgKtreC2M/Xjy6b9DDHEg==service-type telnet http https terminalauthorization-attribute user-role network-adminauthorization-attribute user-role network-operator#password行改为下面内容password simple 123

在交换机使用修改过后的配置文件覆盖原来的配置文件

<H3C>restore startup-configuration 10.10.12.23 startup.cfg

重启交换机

使用admin/123登录