Redis configuration file example.
使用/path/to/redis.conf的文件启动redis-server
./redis-server /path/to/redis.conf
Note on units: when memory size is needed, it is possible to specify
it in the usual form of 1k 5GB 4M and so forth:
1k => 1000 bytes
1kb => 1024 bytes
1m => 1000000 bytes
1mb => 1024*1024 bytes
1g => 1000000000 bytes
1gb => 102410241024 bytes
units are case insensitive so 1GB 1Gb 1gB are all the same. 不区分大小写
################################## INCLUDES ###################################
指定包含其他的配置文件，可以在同一主机上多个Redis实例之间使用同一份配置文件，而同时各实例又拥有自己的特定配置文件
include /path/to/local.conf
include /path/to/other.conf
################################## MODULES #####################################
Load modules at startup. If the server is not able to load modules
it will abort. It is possible to use multiple loadmodule directives.
loadmodule /path/to/my_module.so
loadmodule /path/to/other_module.so
################################## NETWORK #####################################
绑定的主机地址
你可以绑定单一接口，如果没有绑定，所有接口都会监听到来的连接(生产环境一定要配置)
Examples:
bind 192.168.1.100 10.0.0.1 # listens on two specific IPv4 addresses
bind 127.0.0.1 ::1 # listens on loopback IPv4 and IPv6
bind * -:😗 # like the default, all available interfaces
bind 127.0.0.1 -::1
bind 0.0.0.0
Protected mode is a layer of security protection, in order to avoid that
Redis instances left open on the internet are accessed and exploited.
When protected mode is on and if:
1) The server is not binding explicitly to a set of addresses using the
“bind” directive.
2) No password is configured.
The server only accepts connections from clients connecting from the
IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain
sockets.
By default protected mode is enabled. You should disable it only if
you are sure you want clients from other hosts to connect to Redis
even if no authentication is configured, nor a specific set of interfaces
are explicitly listed using the “bind” directive.
protected-mode no
指定Redis监听端口，默认端口为6379
如果指定0端口，表示Redis不监听TCP连接
port 6379
TCP listen() backlog.
设置tcp的backlog，backlog其实是一个连接队列，backlog队列综合=未完成三次握手队列+已经完成三次握手队列，高并发情况可考虑更改
In high requests-per-second environments you need a high backlog in order
to avoid slow clients connection issues. Note that the Linux kernel
will silently truncate it to the value of /proc/sys/net/core/somaxconn so
make sure to raise both the value of somaxconn and tcp_max_syn_backlog
in order to get the desired effect.
tcp-backlog 511
Unix socket.
Specify the path for the Unix socket that will be used to listen for
incoming connections. There is no default, so Redis will not listen
on a unix socket when not specified.
unixsocket /run/redis.sock
unixsocketperm 700
当客户端闲置多长时间后关闭连接，如果指定为0，表示关闭该功能
timeout 0
TCP keepalive.
单位为秒，如果设置为0，则不会进行Keepalive检测，建议设置为60，默认为300s,在redis 3.2.1之后
tcp-keepalive 60
################################# TLS/SSL #####################################
By default, TLS/SSL is disabled. To enable it, the “tls-port” configuration
directive can be used to define TLS-listening ports. To enable TLS on the
default port, use:
port 0
tls-port 6379
Configure a X.509 certificate and private key to use for authenticating the
server to connected clients, masters or cluster peers. These files should be
PEM formatted.
tls-cert-file redis.crt
tls-key-file redis.key
If the key file is encrypted using a passphrase, it can be included here
as well.
tls-key-file-pass secret
Normally Redis uses the same certificate for both server functions (accepting
connections) and client functions (replicating from a master, establishing
cluster bus connections, etc.).
Sometimes certificates are issued with attributes that designate them as
client-only or server-only certificates. In that case it may be desired to use
different certificates for incoming (server) and outgoing (client)
connections. To do that, use the following directives:
tls-client-cert-file client.crt
tls-client-key-file client.key
If the key file is encrypted using a passphrase, it can be included here
as well.
tls-client-key-file-pass secret
Configure a DH parameters file to enable Diffie-Hellman (DH) key exchange:
tls-dh-params-file redis.dh
Configure a CA certificate(s) bundle or directory to authenticate TLS/SSL
clients and peers. Redis requires an explicit configuration of at least one
of these, and will not implicitly use the system wide configuration.
tls-ca-cert-file ca.crt
tls-ca-cert-dir /etc/ssl/certs
By default, clients (including replica servers) on a TLS port are required
to authenticate using valid client side certificates.
If “no” is specified, client certificates are not required and not accepted.
If “optional” is specified, client certificates are accepted and must be
valid if provided, but are not required.
tls-auth-clients no
tls-auth-clients optional
By default, a Redis replica does not attempt to establish a TLS connection
with its master.
Use the following directive to enable TLS on replication links.
tls-replication yes
By default, the Redis Cluster bus uses a plain TCP connection. To enable
TLS for the bus protocol, use the following directive:
tls-cluster yes
By default, only TLSv1.2 and TLSv1.3 are enabled and it is highly recommended
that older formally deprecated versions are kept disabled to reduce the attack surface.
You can explicitly specify TLS versions to support.
Allowed values are case insensitive and include “TLSv1”, “TLSv1.1”, “TLSv1.2”,
“TLSv1.3” (OpenSSL >= 1.1.1) or any combination.
To enable only TLSv1.2 and TLSv1.3, use:
tls-protocols “TLSv1.2 TLSv1.3”
Configure allowed ciphers. See the ciphers(1ssl) manpage for more information
about the syntax of this string.
Note: this configuration applies only to <= TLSv1.2.
tls-ciphers DEFAULT:!MEDIUM
Configure allowed TLSv1.3 ciphersuites. See the ciphers(1ssl) manpage for more
information about the syntax of this string, and specifically for TLSv1.3
ciphersuites.
tls-ciphersuites TLS_CHACHA20_POLY1305_SHA256
When choosing a cipher, use the server’s preference instead of the client
preference. By default, the server follows the client’s preference.
tls-prefer-server-ciphers yes
By default, TLS session caching is enabled to allow faster and less expensive
reconnections by clients that support it. Use the following directive to disable
caching.
tls-session-caching no
Change the default number of TLS sessions cached. A zero value sets the cache
to unlimited size. The default size is 20480.
tls-session-cache-size 5000
Change the default timeout of cached TLS sessions. The default timeout is 300
seconds.
tls-session-cache-timeout 60
################################# GENERAL #####################################
Redis默认不是以守护进程的方式运行，可以通过该配置项修改，使用yes启用守护进程
启用守护进程后，Redis会把pid写到一个pidfile中，在/var/run/redis.pid
daemonize:yes:redis采用的是单进程多线程的模式。当redis.conf中选项daemonize设置成yes时，代表开启守护进程模式。在该模式下，redis会在后台运行，并将进程pid号写入至redis.conf选项pidfile设置的文件中，此时redis将一直运行，除非手动kill该进程。
docker启动时注意要注释这个,因为docker run -d和这个会冲突,导致docker logs也没有日志输出
daemonize yes
If you run Redis from upstart or systemd, Redis can interact with your
supervision tree. Options:
supervised no - no supervision interaction
supervised upstart - signal upstart by putting Redis into SIGSTOP mode
requires “expect stop” in your upstart job config
supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET
on startup, and updating Redis status on a regular
basis.
supervised auto - detect upstart or systemd method based on
UPSTART_JOB or NOTIFY_SOCKET environment variables
Note: these supervision methods only signal “process is ready.”
They do not enable continuous pings back to your supervisor.
The default is “no”. To run under upstart/systemd, you can simply uncomment
the line below:
supervised auto
当Redis以守护进程方式运行时，Redis默认会把pid写入/var/run/redis.pid文件，可以通过pidfile指定
pidfile /var/run/redis_6379.pid
Specify the server verbosity level. 4个等级
This can be one of:
debug (a lot of information, useful for development/testing)
verbose (many rarely useful info, but not a mess like the debug level)
notice (moderately verbose, what you want in production probably)
warning (only very important / critical messages are logged)
loglevel notice
日志记录方式，默认为标准输出，如果配置为redis为守护进程方式运行，而这里又配置为标准输出，则日志将会发送给/dev/null
logfile “”
系统日志，默认关闭。
syslog-enabled no
系统日志以redis开头
syslog-ident redis
输出级别 0-7或者USER.
syslog-facility local0
To disable the built in crash log, which will possibly produce cleaner core
dumps when they are needed, uncomment the following:
crash-log-enabled no
To disable the fast memory check that’s run as part of the crash log, which
will possibly let redis terminate sooner, uncomment the following:
crash-memcheck-enabled no
设置数据库的数量，默认数据库为0，可以使用select 命令在连接上指定数据库id
dbid是从0到‘databases’-1的数目
databases 16
By default Redis shows an ASCII art logo only when started to log to the
standard output and if the standard output is a TTY and syslog logging is
disabled. Basically this means that normally a logo is displayed only in
interactive sessions.
However it is possible to force the pre-4.0 behavior and always show a
ASCII art logo in startup logs by setting the following option to yes.
always-show-logo no
By default, Redis modifies the process title (as seen in ‘top’ and ‘ps’) to
provide some runtime information. It is possible to disable this and leave
the process name as executed by setting the following to no.
set-proc-title yes
When changing the process title, Redis uses the following template to construct
the modified title.
Template variables are specified in curly brackets. The following variables are
supported:
{title} Name of process as executed if parent, or type of child process.
{listen-addr} Bind address or ‘*’ followed by TCP or TLS port listening on, or
Unix socket if only that’s available.
{server-mode} Special mode, i.e. “[sentinel]” or “[cluster]”.
{port} TCP port listening on, or 0.
{tls-port} TLS port listening on, or 0.
{unixsocket} Unix domain socket listening on, or “”.
{config-file} Name of configuration file used.
proc-title-template “{title} {listen-addr} {server-mode}”
################################ SNAPSHOTTING ################################
指定在多长时间内，有多少次更新操作，就将数据同步到数据文件，可以多个条件配合
Save the DB to disk. 先aof再rdb
save
flushall shutdown会触发立马生成dump.rdb
满足以下条件将会同步数据:
900秒（15分钟）内有1个更改
300秒（5分钟）内有10个更改
60秒内有10000个更改
Note: 可以把所有“save”行注释掉，这样就取消同步操作了
save 3600 1
save 300 100
save 60 10000
save “” 代表禁用rdb
save 900 1
save 300 10
save 60 10000
指定存储至本地数据库时是否压缩数据，默认为yes，Redis采用LZF压缩，如果为了节省CPU时间，可以关闭该选项，但会导致数据库文件变的巨大
rdbcompression yes
在存储快照后，还可以让redis使用CRC64算法来进行数据校验，但是这样做会增加大的10%CPU性能消耗，如何希望获取到最大的性能提升，可以选择关闭此功能。
rdbchecksum yes
Enables or disables full sanitation checks for ziplist and listpack etc when
loading an RDB or RESTORE payload. This reduces the chances of a assertion or
crash later on while processing commands.
Options:
no - Never perform full sanitation
yes - Always perform full sanitation
clients - Perform full sanitation only for user connections.
Excludes: RDB files, RESTORE commands received from the master
connection, and client connections which have the
skip-sanitize-payload ACL flag.
The default should be ‘clients’ but since it currently affects cluster
resharding via MIGRATE, it is temporarily set to ‘no’ by default.
sanitize-dump-payload no
指定本地数据库文件名，默认值为dump.rdb
dbfilename dump.rdb
Remove RDB files used by replication in instances without persistence
enabled. By default this option is disabled, however there are environments
where for regulations or other security concerns, RDB files persisted on
disk by masters in order to feed replicas, or stored on disk by replicas
in order to load them for the initial synchronization, should be deleted
ASAP. Note that this option ONLY WORKS in instances that have both AOF
and RDB persistence disabled, otherwise is completely ignored.
An alternative (and sometimes better) way to obtain the same effect is
to use diskless replication on both master and replicas instances. However
in the case of replicas, diskless is not always an option.
rdb-del-sync-files no
工作目录.
指定本地数据库存放目录，文件名由上一个dbfilename配置项指定
Also the Append Only File will be created inside this directory.
注意，这里只能指定一个目录，不能指定文件名 默认是当前运行路径。建议配置成绝对路径
dir ./
################################# REPLICATION #################################
Master-Replica replication. Use replicaof to make a Redis instance a copy of
another Redis server. A few things to understand ASAP about Redis replication.
±-----------------+ ±--------------+
| Master | —> | Replica |
| (receive writes) | | (exact copy) |
±-----------------+ ±--------------+
主从复制使用
replicaof
If the master is password protected (using the “requirepass” configuration
directive below) it is possible to tell the replica to authenticate before
starting the replication synchronization process, otherwise the master will
refuse the replica request.
masterauth
However this is not enough if you are using Redis ACLs (for Redis version
6 or greater), and the default user is not capable of running the PSYNC
command and/or other commands needed for replication. In this case it’s
better to configure a special user to use with replication, and specify the
masteruser configuration as such:
masteruser
When masteruser is specified, the replica will authenticate against its
master using the new AUTH form: AUTH .
When a replica loses its connection with the master, or when the replication
is still in progress, the replica can act in two different ways:
1) if replica-serve-stale-data is set to ‘yes’ (the default) the replica will
still reply to client requests, possibly with out of date data, or the
data set may just be empty if this is the first synchronization.
2) If replica-serve-stale-data is set to ‘no’ the replica will reply with
an error “SYNC with master in progress” to all commands except:
INFO, REPLICAOF, AUTH, PING, SHUTDOWN, REPLCONF, ROLE, CONFIG, SUBSCRIBE,
UNSUBSCRIBE, PSUBSCRIBE, PUNSUBSCRIBE, PUBLISH, PUBSUB, COMMAND, POST,
HOST and LATENCY.
replica-serve-stale-data yes
You can configure a replica instance to accept writes or not. Writing against
a replica instance may be useful to store some ephemeral data (because data
written on a replica will be easily deleted after resync with the master) but
may also cause problems if clients are writing to it because of a
misconfiguration.
Since Redis 2.6 by default replicas are read-only.
Note: read only replicas are not designed to be exposed to untrusted clients
on the internet. It’s just a protection layer against misuse of the instance.
Still a read only replica exports by default all the administrative commands
such as CONFIG, DEBUG, and so forth. To a limited extent you can improve
security of read only replicas using ‘rename-command’ to shadow all the
administrative / dangerous commands.
replica-read-only yes
Replication SYNC strategy: disk or socket.
New replicas and reconnecting replicas that are not able to continue the
replication process just receiving differences, need to do what is called a
“full synchronization”. An RDB file is transmitted from the master to the
replicas.
The transmission can happen in two different ways:
1) Disk-backed: The Redis master creates a new process that writes the RDB
file on disk. Later the file is transferred by the parent
process to the replicas incrementally.
2) Diskless: The Redis master creates a new process that directly writes the
RDB file to replica sockets, without touching the disk at all.
With disk-backed replication, while the RDB file is generated, more replicas
can be queued and served with the RDB file as soon as the current child
producing the RDB file finishes its work. With diskless replication instead
once the transfer starts, new replicas arriving will be queued and a new
transfer will start when the current one terminates.
When diskless replication is used, the master waits a configurable amount of
time (in seconds) before starting the transfer in the hope that multiple
replicas will arrive and the transfer can be parallelized.
With slow disks and fast (large bandwidth) networks, diskless replication
works better.
repl-diskless-sync no
When diskless replication is enabled, it is possible to configure the delay
the server waits in order to spawn the child that transfers the RDB via socket
to the replicas.
This is important since once the transfer starts, it is not possible to serve
new replicas arriving, that will be queued for the next RDB transfer, so the
server waits a delay in order to let more replicas arrive.
The delay is specified in seconds, and by default is 5 seconds. To disable
it entirely just set it to 0 seconds and the transfer will start ASAP.
repl-diskless-sync-delay 5
-----------------------------------------------------------------------------
WARNING: RDB diskless load is experimental. Since in this setup the replica
does not immediately store an RDB on disk, it may cause data loss during
failovers. RDB diskless load + Redis modules not handling I/O reads may also
cause Redis to abort in case of I/O errors during the initial synchronization
stage with the master. Use only if you know what you are doing.
-----------------------------------------------------------------------------
Replica can load the RDB it reads from the replication link directly from the
socket, or store the RDB to a file and read that file after it was completely
received from the master.
In many cases the disk is slower than the network, and storing and loading
the RDB file may increase replication time (and even increase the master’s
Copy on Write memory and salve buffers).
However, parsing the RDB file directly from the socket may mean that we have
to flush the contents of the current database before the full rdb was
received. For this reason we have the following options:
“disabled” - Don’t use diskless load (store the rdb file to the disk first)
“on-empty-db” - Use diskless load only when it is completely safe.
“swapdb” - Keep a copy of the current db contents in RAM while parsing
the data directly from the socket. note that this requires
sufficient memory, if you don’t have it, you risk an OOM kill.
repl-diskless-load disabled
Replicas send PINGs to server in a predefined interval. It’s possible to
change this interval with the repl_ping_replica_period option. The default
value is 10 seconds.
repl-ping-replica-period 10
The following option sets the replication timeout for:
1) Bulk transfer I/O during SYNC, from the point of view of replica.
2) Master timeout from the point of view of replicas (data, pings).
3) Replica timeout from the point of view of masters (REPLCONF ACK pings).
It is important to make sure that this value is greater than the value
specified for repl-ping-replica-period otherwise a timeout will be detected
every time there is low traffic between the master and the replica. The default
value is 60 seconds.
repl-timeout 60
Disable TCP_NODELAY on the replica socket after SYNC?
If you select “yes” Redis will use a smaller number of TCP packets and
less bandwidth to send data to replicas. But this can add a delay for
the data to appear on the replica side, up to 40 milliseconds with
Linux kernels using a default configuration.
If you select “no” the delay for data to appear on the replica side will
be reduced but more bandwidth will be used for replication.
By default we optimize for low latency, but in very high traffic conditions
or when the master and replicas are many hops away, turning this to “yes” may
be a good idea.
repl-disable-tcp-nodelay no
Set the replication backlog size. The backlog is a buffer that accumulates
replica data when replicas are disconnected for some time, so that when a
replica wants to reconnect again, often a full resync is not needed, but a
partial resync is enough, just passing the portion of data the replica
missed while disconnected.
The bigger the replication backlog, the longer the replica can endure the
disconnect and later be able to perform a partial resynchronization.
The backlog is only allocated if there is at least one replica connected.
repl-backlog-size 1mb
After a master has no connected replicas for some time, the backlog will be
freed. The following option configures the amount of seconds that need to
elapse, starting from the time the last replica disconnected, for the backlog
buffer to be freed.
Note that replicas never free the backlog for timeout, since they may be
promoted to masters later, and should be able to correctly "partially
resynchronize" with other replicas: hence they should always accumulate backlog.
A value of 0 means to never release the backlog.
repl-backlog-ttl 3600
The replica priority is an integer number published by Redis in the INFO
output. It is used by Redis Sentinel in order to select a replica to promote
into a master if the master is no longer working correctly.
A replica with a low priority number is considered better for promotion, so
for instance if there are three replicas with priority 10, 100, 25 Sentinel
will pick the one with priority 10, that is the lowest.
However a special priority of 0 marks the replica as not able to perform the
role of master, so a replica with priority of 0 will never be selected by
Redis Sentinel for promotion.
By default the priority is 100.
replica-priority 100
-----------------------------------------------------------------------------
By default, Redis Sentinel includes all replicas in its reports. A replica
can be excluded from Redis Sentinel’s announcements. An unannounced replica
will be ignored by the ‘sentinel replicas ’ command and won’t be
exposed to Redis Sentinel’s clients.
This option does not change the behavior of replica-priority. Even with
replica-announced set to ‘no’, the replica can be promoted to master. To
prevent this behavior, set replica-priority to 0.
replica-announced yes
It is possible for a master to stop accepting writes if there are less than
N replicas connected, having a lag less or equal than M seconds.
The N replicas need to be in “online” state.
The lag in seconds, that must be <= the specified value, is calculated from
the last ping received from the replica, that is usually sent every second.
This option does not GUARANTEE that N replicas will accept the write, but
will limit the window of exposure for lost writes in case not enough replicas
are available, to the specified number of seconds.
For example to require at least 3 replicas with a lag <= 10 seconds use:
min-replicas-to-write 3
min-replicas-max-lag 10
Setting one or the other to 0 disables the feature.
By default min-replicas-to-write is set to 0 (feature disabled) and
min-replicas-max-lag is set to 10.
A Redis master is able to list the address and port of the attached
replicas in different ways. For example the “INFO replication” section
offers this information, which is used, among other tools, by
Redis Sentinel in order to discover replica instances.
Another place where this info is available is in the output of the
“ROLE” command of a master.
The listed IP address and port normally reported by a replica is
obtained in the following way:
IP: The address is auto detected by checking the peer address
of the socket used by the replica to connect with the master.
Port: The port is communicated by the replica during the replication
handshake, and is normally the port that the replica is using to
listen for connections.
However when port forwarding or Network Address Translation (NAT) is
used, the replica may actually be reachable via different IP and port
pairs. The following two options can be used by a replica in order to
report to its master a specific set of IP and port, so that both INFO
and ROLE will report those values.
There is no need to use both the options if you need to override just
the port or the IP address.
replica-announce-ip 5.5.5.5
replica-announce-port 1234
############################### KEYS TRACKING #################################
Redis implements server assisted support for client side caching of values.
This is implemented using an invalidation table that remembers, using
a radix key indexed by key name, what clients have which keys. In turn
this is used in order to send invalidation messages to clients. Please
check this page to understand more about the feature:
https://redis.io/topics/client-side-caching
When tracking is enabled for a client, all the read only queries are assumed
to be cached: this will force Redis to store information in the invalidation
table. When keys are modified, such information is flushed away, and
invalidation messages are sent to the clients. However if the workload is
heavily dominated by reads, Redis could use more and more memory in order
to track the keys fetched by many clients.
For this reason it is possible to configure a maximum fill value for the
invalidation table. By default it is set to 1M of keys, and once this limit
is reached, Redis will start to evict keys in the invalidation table
even if they were not modified, just to reclaim memory: this will in turn
force the clients to invalidate the cached values. Basically the table
maximum size is a trade off between the memory you want to spend server
side to track information about who cached what, and the ability of clients
to retain cached objects in memory.
If you set the value to 0, it means there are no limits, and Redis will
retain as many keys as needed in the invalidation table.
In the “stats” INFO section, you can find information about the number of
keys in the invalidation table at every given moment.
Note: when key tracking is used in broadcasting mode, no memory is used
in the server side so this setting is useless.
tracking-table-max-keys 1000000
################################## SECURITY ###################################
Warning: since Redis is pretty fast, an outside user can try up to
1 million passwords per second against a modern box. This means that you
should use very strong passwords, otherwise they will be very easy to break.
Note that because the password is really a shared secret between the client
and the server, and should not be memorized by any human, the password
can be easily a long string from /dev/urandom or whatever, so by using a
long and unguessable password no brute force attack will be possible.
Redis ACL users are defined in the following format:
user … acl rules …
For example:
user worker +@list +@connection ~jobs:* on >ffa9203c493aa99
The special username “default” is used for new connections. If this user
has the “nopass” rule, then new connections will be immediately authenticated
as the “default” user without the need of any password provided via the
AUTH command. Otherwise if the “default” user is not flagged with “nopass”
the connections will start in not authenticated state, and will require
AUTH (or the HELLO command AUTH option) in order to be authenticated and
start to work.
The ACL rules that describe what a user can do are the following:
on Enable the user: it is possible to authenticate as this user.
off Disable the user: it’s no longer possible to authenticate
with this user, however the already authenticated connections
will still work.
skip-sanitize-payload RESTORE dump-payload sanitation is skipped.
sanitize-payload RESTORE dump-payload is sanitized (default).
+ Allow the execution of that command
- Disallow the execution of that command
+@ Allow the execution of all the commands in such category
with valid categories are like @admin, @set, @sortedset, …
and so forth, see the full list in the server.c file where
the Redis command table is described and defined.
The special category @all means all the commands, but currently
present in the server, and that will be loaded in the future
via modules.
+|subcommand Allow a specific subcommand of an otherwise
disabled command. Note that this form is not
allowed as negative like -DEBUG|SEGFAULT, but
only additive starting with “+”.
allcommands Alias for +@all. Note that it implies the ability to execute
all the future commands loaded via the modules system.
nocommands Alias for -@all.
~ Add a pattern of keys that can be mentioned as part of
commands. For instance ~* allows all the keys. The pattern
is a glob-style pattern like the one of KEYS.
It is possible to specify multiple patterns.
allkeys Alias for ~*
resetkeys Flush the list of allowed keys patterns.
& Add a glob-style pattern of Pub/Sub channels that can be
accessed by the user. It is possible to specify multiple channel
patterns.
allchannels Alias for &*
resetchannels Flush the list of allowed channel patterns.
> Add this password to the list of valid password for the user.
For example >mypass will add “mypass” to the list.
This directive clears the “nopass” flag (see later).
< Remove this password from the list of valid passwords.
nopass All the set passwords of the user are removed, and the user
is flagged as requiring no password: it means that every
password will work against this user. If this directive is
used for the default user, every new connection will be
immediately authenticated with the default user without
any explicit AUTH command required. Note that the “resetpass”
directive will clear this condition.
resetpass Flush the list of allowed passwords. Moreover removes the
“nopass” status. After “resetpass” the user has no associated
passwords and there is no way to authenticate without adding
some password (or setting it as “nopass” later).
reset Performs the following actions: resetpass, resetkeys, off,
-@all. The user returns to the same state it has immediately
after its creation.
ACL rules can be specified in any order: for instance you can start with
passwords, then flags, or key patterns. However note that the additive
and subtractive rules will CHANGE MEANING depending on the ordering.
For instance see the following example:
user alice on +@all -DEBUG ~* >somepassword
This will allow “alice” to use all the commands with the exception of the
DEBUG command, since +@all added all the commands to the set of the commands
alice can use, and later DEBUG was removed. However if we invert the order
of two ACL rules the result will be different:
user alice on -DEBUG +@all ~* >somepassword
Now DEBUG was removed when alice had yet no commands in the set of allowed
commands, later all the commands are added, so the user will be able to
execute everything.
Basically ACL rules are processed left-to-right.
For more information about ACL configuration please refer to
the Redis web site at https://redis.io/topics/acl
ACL LOG
The ACL Log tracks failed commands and authentication events associated
with ACLs. The ACL Log is useful to troubleshoot failed commands blocked
by ACLs. The ACL Log is stored in memory. You can reclaim memory with
ACL LOG RESET. Define the maximum entry length of the ACL Log below.
acllog-max-len 128
Using an external ACL file
Instead of configuring users here in this file, it is possible to use
a stand-alone file just listing users. The two methods cannot be mixed:
if you configure users here and at the same time you activate the external
ACL file, the server will refuse to start.
The format of the external ACL user file is exactly the same as the
format that is used inside redis.conf to describe users.
aclfile /etc/redis/users.acl
IMPORTANT NOTE: starting with Redis 6 “requirepass” is just a compatibility
layer on top of the new ACL system. The option effect will be just setting
the password for the default user. Clients will still authenticate using
AUTH as usually, or more explicitly with AUTH default
if they follow the new protocol: both will work.
redis密码
requirepass 123456
New users are initialized with restrictive permissions by default, via the
equivalent of this ACL rule ‘off resetkeys -@all’. Starting with Redis 6.2, it
is possible to manage access to Pub/Sub channels with ACL rules as well. The
default Pub/Sub channels permission if new users is controlled by the
acl-pubsub-default configuration directive, which accepts one of these values:
allchannels: grants access to all Pub/Sub channels
resetchannels: revokes access to all Pub/Sub channels
To ensure backward compatibility while upgrading Redis 6.0, acl-pubsub-default
defaults to the ‘allchannels’ permission.
Future compatibility note: it is very likely that in a future version of Redis
the directive’s default of ‘allchannels’ will be changed to ‘resetchannels’ in
order to provide better out-of-the-box Pub/Sub security. Therefore, it is
recommended that you explicitly define Pub/Sub permissions for all users
rather then rely on implicit default values. Once you’ve set explicit
Pub/Sub for all existing users, you should uncomment the following line.
acl-pubsub-default resetchannels
Command renaming (DEPRECATED).
------------------------------------------------------------------------
WARNING: avoid using this option if possible. Instead use ACLs to remove
commands from the default user, and put them only in some admin user you
create for administrative purposes.
------------------------------------------------------------------------
重命名一些高危操作
Example:
rename-command FLUSHALL joYAPNXRPmcarcR4ZDgC81TbdkSmLAzRPmcarcR
rename-command FLUSHDB qf69aZbLAX3cf3ednHM3SOlbpH71yEXLAX3cf3e
rename-command KEYS eIiGXix4A2DreBBsQwY6YHkidcDjoYA2DreBBsQ —暂时未使用
rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
It is also possible to completely kill a command by renaming it into
an empty string:
rename-command CONFIG “”
Please note that changing the name of commands that are logged into the
AOF file or transmitted to replicas may cause problems.
################################### CLIENTS ####################################
设置同一时间最大客户端连接数，默认无限制，Redis可以同时打开的客户端连接数为Redis进程可以打开的最大文件描述符数，默认10000
如果设置maxclients 0，表示不作限制。当客户端连接数到达限制时，Redis会关闭新的连接并向客户端返回max Number of clients reached错误信息
maxclients 128
############################## MEMORY MANAGEMENT ################################
#指定Redis最大内存限制，Redis在启动时会把数据加载到内存中，达到最大内存后，Redis会先尝试清除已到期或即将到期的Key，
#当此方法处理 后，仍然到达最大内存设置，将无法再进行写入操作，但仍然可以进行读取操作。
#Redis新的vm机制，会把Key存放内存，Value会存放在swap区
#Redis的最大使用内存跟搭配方式有关，如果只是用Redis做纯缓存的话，64-128M对一般小型网站就足够了。如果使用Redis做数据库的话，设置到物理内存的1/2到3/4左右都可以。如果使用了快照功能的话，最好用到50%以下，因为快照复制更新需要双倍内存空间，如果没有使用快照而设置redis缓存数据库，可以用到内存的80%左右，只要能保证php、NGINX等其它程序可以正常运行就行了。
maxmemory 128mb
MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
is reached. You can select one from the following behaviors:
volatile-lru -> 当内存不足以容纳新写入数据时，在设置了过期时间的键空间中，移除最近最少使用的 Key。这种情况一般是把 Redis 既当缓存，又做持久化存储的时候才用。（不推荐）
allkeys-lru -> 当内存不足以容纳新写入数据时，在键空间中，移除最近最少使用的 Key。(最近最久使用算法)（推荐使用）
volatile-lfu -> 在设置了失效时间的所有 key 中，使用近似的 LFU 淘汰 key，也就是最少被访问的 key（推荐使用）
allkeys-lfu -> 在所有 key 里根据 LFU 淘汰 key
volatile-random -> 当内存不足以容纳新写入数据时，在设置了过期时间的键空间中，随机移除某个 Key。（依然不推荐）
allkeys-random -> 当内存不足以容纳新写入数据时，在键空间中，随机移除某个 Key。（应该也没人用吧，你不删最少使用 Key，去随机删）
volatile-ttl -> 当内存不足以容纳新写入数据时，在设置了过期时间的键空间中，有更早过期时间的 Key 优先移除。（不推荐）
noeviction -> 当内存不足以容纳新写入数据时，新写入操作会报错。 默认项
LRU means Least Recently Used
LFU means Least Frequently Used
Both LRU, LFU and volatile-ttl are implemented using approximated
randomized algorithms.
Note: with any of the above policies, when there are no suitable keys for
eviction, Redis will return an error on write operations that require
more memory. These are usually commands that create new keys, add data or
modify existing keys. A few examples are: SET, INCR, HSET, LPUSH, SUNIONSTORE,
SORT (due to the STORE argument), and EXEC (if the transaction includes any
command that requires memory).
maxmemory-policy volatile-lfu
样本数，提高可增加算法LRU和LFU的精确度 。 5选1淘汰
maxmemory-samples 5
Eviction processing is designed to function well with the default setting.
If there is an unusually large amount of write traffic, this value may need to
be increased. Decreasing this value may reduce latency at the risk of
eviction processing effectiveness
0 = minimum latency, 10 = default, 100 = process without regard to latency
maxmemory-eviction-tenacity 10
Starting from Redis 5, by default a replica will ignore its maxmemory setting
(unless it is promoted to master after a failover or manually). It means
that the eviction of keys will be just handled by the master, sending the
DEL commands to the replica as keys evict in the master side.
This behavior ensures that masters and replicas stay consistent, and is usually
what you want, however if your replica is writable, or you want the replica
to have a different memory setting, and you are sure all the writes performed
to the replica are idempotent, then you may change this default (but be sure
to understand what you are doing).
Note that since the replica by default does not evict, it may end using more
memory than the one set via maxmemory (there are certain buffers that may
be larger on the replica, or data structures may sometimes take more memory
and so forth). So make sure you monitor your replicas and make sure they
have enough memory to never hit a real out-of-memory condition before the
master hits the configured maxmemory setting.
replica-ignore-maxmemory yes
Redis reclaims expired keys in two ways: upon access when those keys are
found to be expired, and also in background, in what is called the
“active expire key”. The key space is slowly and interactively scanned
looking for expired keys to reclaim, so that it is possible to free memory
of keys that are expired and will never be accessed again in a short time.
The default effort of the expire cycle will try to avoid having more than
ten percent of expired keys still in memory, and will try to avoid consuming
more than 25% of total memory and to add latency to the system. However
it is possible to increase the expire “effort” that is normally set to
“1”, to a greater value, up to the value “10”. At its maximum value the
system will use more CPU, longer cycles (and technically may introduce
more latency), and will tolerate less already expired keys still present
in the system. It’s a tradeoff between memory, CPU and latency.
active-expire-effort 1
############################# LAZY FREEING ####################################
Redis has two primitives to delete keys. One is called DEL and is a blocking
deletion of the object. It means that the server stops processing new commands
in order to reclaim all the memory associated with an object in a synchronous
way. If the key deleted is associated with a small object, the time needed
in order to execute the DEL command is very small and comparable to most other
O(1) or O(log_N) commands in Redis. However if the key is associated with an
aggregated value containing millions of elements, the server can block for
a long time (even seconds) in order to complete the operation.
For the above reasons Redis also offers non blocking deletion primitives
such as UNLINK (non blocking DEL) and the ASYNC option of FLUSHALL and
FLUSHDB commands, in order to reclaim memory in background. Those commands
are executed in constant time. Another thread will incrementally free the
object in the background as fast as possible.
DEL, UNLINK and ASYNC option of FLUSHALL and FLUSHDB are user-controlled.
It’s up to the design of the application to understand when it is a good
idea to use one or the other. However the Redis server sometimes has to
delete keys or flush the whole database as a side effect of other operations.
Specifically Redis deletes objects independently of a user call in the
following scenarios:
1) On eviction, because of the maxmemory and maxmemory policy configurations,
in order to make room for new data, without going over the specified
memory limit.
2) Because of expire: when a key with an associated time to live (see the
EXPIRE command) must be deleted from memory.
3) Because of a side effect of a command that stores data on a key that may
already exist. For example the RENAME command may delete the old key
content when it is replaced with another one. Similarly SUNIONSTORE
or SORT with STORE option may delete existing keys. The SET command
itself removes any old content of the specified key in order to replace
it with the specified string.
4) During replication, when a replica performs a full resynchronization with
its master, the content of the whole database is removed in order to
load the RDB file just transferred.
In all the above cases the default is to delete objects in a blocking way,
like if DEL was called. However you can configure each case specifically
in order to instead release memory in a non-blocking way like if UNLINK
was called, using the following configuration directives.
lazyfree-lazy-eviction no
lazyfree-lazy-expire no
lazyfree-lazy-server-del no
replica-lazy-flush no
It is also possible, for the case when to replace the user code DEL calls
with UNLINK calls is not easy, to modify the default behavior of the DEL
command to act exactly like UNLINK, using the following configuration
directive:
lazyfree-lazy-user-del no
FLUSHDB, FLUSHALL, and SCRIPT FLUSH support both asynchronous and synchronous
deletion, which can be controlled by passing the [SYNC|ASYNC] flags into the
commands. When neither flag is passed, this directive will be used to determine
if the data should be deleted asynchronously.
lazyfree-lazy-user-flush no
################################ THREADED I/O #################################
Redis is mostly single threaded, however there are certain threaded
operations such as UNLINK, slow I/O accesses and other things that are
performed on side threads.
Now it is also possible to handle Redis clients socket reads and writes
in different I/O threads. Since especially writing is so slow, normally
Redis users use pipelining in order to speed up the Redis performances per
core, and spawn multiple instances in order to scale more. Using I/O
threads it is possible to easily speedup two times Redis without resorting
to pipelining nor sharding of the instance.
By default threading is disabled, we suggest enabling it only in machines
that have at least 4 or more cores, leaving at least one spare core.
Using more than 8 threads is unlikely to help much. We also recommend using
threaded I/O only if you actually have performance problems, with Redis
instances being able to use a quite big percentage of CPU time, otherwise
there is no point in using this feature.
So for instance if you have a four cores boxes, try to use 2 or 3 I/O
threads, if you have a 8 cores, try to use 6 threads. In order to
enable I/O threads use the following configuration directive:
io-threads 4
Setting io-threads to 1 will just use the main thread as usual.
When I/O threads are enabled, we only use threads for writes, that is
to thread the write(2) syscall and transfer the client buffers to the
socket. However it is also possible to enable threading of reads and
protocol parsing using the following configuration directive, by setting
it to yes:
io-threads-do-reads no
Usually threading reads doesn’t help much.
NOTE 1: This configuration directive cannot be changed at runtime via
CONFIG SET. Aso this feature currently does not work when SSL is
enabled.
NOTE 2: If you want to test the Redis speedup using redis-benchmark, make
sure you also run the benchmark itself in threaded mode, using the
–threads option to match the number of Redis threads, otherwise you’ll not
be able to notice the improvements.
############################ KERNEL OOM CONTROL ##############################
On Linux, it is possible to hint the kernel OOM killer on what processes
should be killed first when out of memory.
Enabling this feature makes Redis actively control the oom_score_adj value
for all its processes, depending on their role. The default scores will
attempt to have background child processes killed before all others, and
replicas killed before masters.
Redis supports three options:
no: Don’t make changes to oom-score-adj (default).
yes: Alias to “relative” see below.
absolute: Values in oom-score-adj-values are written as is to the kernel.
relative: Values are used relative to the initial value of oom_score_adj when
the server starts and are then clamped to a range of -1000 to 1000.
Because typically the initial value is 0, they will often match the
absolute values.
oom-score-adj no
When oom-score-adj is used, this directive controls the specific values used
for master, replica and background child processes. Values range -2000 to
2000 (higher means more likely to be killed).
Unprivileged processes (not root, and without CAP_SYS_RESOURCE capabilities)
can freely increase their value, but not decrease it below its initial
settings. This means that setting oom-score-adj to “relative” and setting the
oom-score-adj-values to positive values will always succeed.
oom-score-adj-values 0 200 800
#################### KERNEL transparent hugepage CONTROL ######################
Usually the kernel Transparent Huge Pages control is set to “madvise” or
or “never” by default (/sys/kernel/mm/transparent_hugepage/enabled), in which
case this config has no effect. On systems in which it is set to “always”,
redis will attempt to disable it specifically for the redis process in order
to avoid latency problems specifically with fork(2) and CoW.
If for some reason you prefer to keep it enabled, you can set this config to
“no” and the kernel global to “always”.
disable-thp yes
############################## APPEND ONLY MODE ###############################
开启appendonly
#先aof再rdb
appendonly yes
appendfilename “appendonly.aof”
#指定更新日志条件，共有 3 个可选值：
#no：表示等操作系统进行数据缓存同步到磁盘（快）
#always：表示每次更新操作后手动调用 fsync() 将数据写到磁盘（慢，安全）
#everysec：表示每秒同步一次（折中，默认值）
If unsure, use “everysec”.
appendfsync everysec
重写时是否可以运用appendfsync，用默认no即可，保证数据安全性
no-appendfsync-on-rewrite no
设置重写的基准值 aop重写是上次rewrite后大小的一倍（例如 auto-aof-rewrite-percentage aof文件增长比例，现在为100%）且文件大于1gb时触发
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 1gb
An AOF file may be found to be truncated at the end during the Redis
startup process, when the AOF data gets loaded back into memory.
This may happen when the system where Redis is running
crashes, especially when an ext4 filesystem is mounted without the
data=ordered option (however this can’t happen when Redis itself
crashes or aborts but the operating system still works correctly).
Redis can either exit with an error when this happens, or load as much
data as possible (the default now) and start if the AOF file is found
to be truncated at the end. The following option controls this behavior.
If aof-load-truncated is set to yes, a truncated AOF file is loaded and
the Redis server starts emitting a log to inform the user of the event.
Otherwise if the option is set to no, the server aborts with an error
and refuses to start. When the option is set to no, the user requires
to fix the AOF file using the “redis-check-aof” utility before to restart
the server.
Note that if the AOF file will be found to be corrupted in the middle
the server will still exit with an error. This option only applies when
Redis will try to read more data from the AOF file but not enough bytes
will be found.
aof-load-truncated yes
When rewriting the AOF file, Redis is able to use an RDB preamble in the
AOF file for faster rewrites and recoveries. When this option is turned
on the rewritten AOF file is composed of two different stanzas:
[RDB file][AOF tail]
When loading, Redis recognizes that the AOF file starts with the “REDIS”
string and loads the prefixed RDB file, then continues loading the AOF
tail.
aof-use-rdb-preamble yes
################################ LUA SCRIPTING ###############################
Max execution time of a Lua script in milliseconds.
If the maximum execution time is reached Redis will log that a script is
still in execution after the maximum allowed time and will start to
reply to queries with an error.
When a long running script exceeds the maximum execution time only the
SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be
used to stop a script that did not yet call any write commands. The second
is the only way to shut down the server in the case a write command was
already issued by the script but the user doesn’t want to wait for the natural
termination of the script.
Set it to 0 or a negative value for unlimited execution without warnings.
lua-time-limit 5000
################################ REDIS CLUSTER ###############################
Normal Redis instances can’t be part of a Redis Cluster; only nodes that are
started as cluster nodes can. In order to start a Redis instance as a
cluster node enable the cluster support uncommenting the following:
cluster-enabled yes
Every cluster node has a cluster configuration file. This file is not
intended to be edited by hand. It is created and updated by Redis nodes.
Every Redis Cluster node requires a different cluster configuration file.
Make sure that instances running in the same system do not have
overlapping cluster configuration file names.
cluster-config-file nodes-6379.conf
Cluster node timeout is the amount of milliseconds a node must be unreachable
for it to be considered in failure state.
Most other internal time limits are a multiple of the node timeout.
cluster-node-timeout 15000
A replica of a failing master will avoid to start a failover if its data
looks too old.
There is no simple way for a replica to actually have an exact measure of
its “data age”, so the following two checks are performed:
1) If there are multiple replicas able to failover, they exchange messages
in order to try to give an advantage to the replica with the best
replication offset (more data from the master processed).
Replicas will try to get their rank by offset, and apply to the start
of the failover a delay proportional to their rank.
2) Every single replica computes the time of the last interaction with
its master. This can be the last ping or command received (if the master
is still in the “connected” state), or the time that elapsed since the
disconnection with the master (if the replication link is currently down).
If the last interaction is too old, the replica will not try to failover
at all.
The point “2” can be tuned by user. Specifically a replica will not perform
the failover if, since the last interaction with the master, the time
elapsed is greater than:
(node-timeout * cluster-replica-validity-factor) + repl-ping-replica-period
So for example if node-timeout is 30 seconds, and the cluster-replica-validity-factor
is 10, and assuming a default repl-ping-replica-period of 10 seconds, the
replica will not try to failover if it was not able to talk with the master
for longer than 310 seconds.
A large cluster-replica-validity-factor may allow replicas with too old data to failover
a master, while a too small value may prevent the cluster from being able to
elect a replica at all.
For maximum availability, it is possible to set the cluster-replica-validity-factor
to a value of 0, which means, that replicas will always try to failover the
master regardless of the last time they interacted with the master.
(However they’ll always try to apply a delay proportional to their
offset rank).
Zero is the only value able to guarantee that when all the partitions heal
the cluster will always be able to continue.
cluster-replica-validity-factor 10
Cluster replicas are able to migrate to orphaned masters, that are masters
that are left without working replicas. This improves the cluster ability
to resist to failures as otherwise an orphaned master can’t be failed over
in case of failure if it has no working replicas.
Replicas migrate to orphaned masters only if there are still at least a
given number of other working replicas for their old master. This number
is the “migration barrier”. A migration barrier of 1 means that a replica
will migrate only if there is at least 1 other working replica for its master
and so forth. It usually reflects the number of replicas you want for every
master in your cluster.
Default is 1 (replicas migrate only if their masters remain with at least
one replica). To disable migration just set it to a very large value or
set cluster-allow-replica-migration to ‘no’.
A value of 0 can be set but is useful only for debugging and dangerous
in production.
cluster-migration-barrier 1
Turning off this option allows to use less automatic cluster configuration.
It both disables migration to orphaned masters and migration from masters
that became empty.
Default is ‘yes’ (allow automatic migrations).
cluster-allow-replica-migration yes
By default Redis Cluster nodes stop accepting queries if they detect there
is at least a hash slot uncovered (no available node is serving it).
This way if the cluster is partially down (for example a range of hash slots
are no longer covered) all the cluster becomes, eventually, unavailable.
It automatically returns available as soon as all the slots are covered again.
However sometimes you want the subset of the cluster which is working,
to continue to accept queries for the part of the key space that is still
covered. In order to do so, just set the cluster-require-full-coverage
option to no.
cluster-require-full-coverage yes
This option, when set to yes, prevents replicas from trying to failover its
master during master failures. However the replica can still perform a
manual failover, if forced to do so.
This is useful in different scenarios, especially in the case of multiple
data center operations, where we want one side to never be promoted if not
in the case of a total DC failure.
cluster-replica-no-failover no
This option, when set to yes, allows nodes to serve read traffic while the
the cluster is in a down state, as long as it believes it owns the slots.
This is useful for two cases. The first case is for when an application
doesn’t require consistency of data during node failures or network partitions.
One example of this is a cache, where as long as the node has the data it
should be able to serve it.
The second use case is for configurations that don’t meet the recommended
three shards but want to enable cluster mode and scale later. A
master outage in a 1 or 2 shard configuration causes a read/write outage to the
entire cluster without this option set, with it set there is only a write outage.
Without a quorum of masters, slot ownership will not change automatically.
cluster-allow-reads-when-down no
In order to setup your cluster make sure to read the documentation
available at https://redis.io web site.
########################## CLUSTER DOCKER/NAT support ########################
In certain deployments, Redis Cluster nodes address discovery fails, because
addresses are NAT-ted or because ports are forwarded (the typical case is
Docker and other containers).
In order to make Redis Cluster working in such environments, a static
configuration where each node knows its public address is needed. The
following four options are used for this scope, and are:
* cluster-announce-ip
* cluster-announce-port
* cluster-announce-tls-port
* cluster-announce-bus-port
Each instructs the node about its address, client ports (for connections
without and with TLS) and cluster message bus port. The information is then
published in the header of the bus packets so that other nodes will be able to
correctly map the address of the node publishing the information.
If cluster-tls is set to yes and cluster-announce-tls-port is omitted or set
to zero, then cluster-announce-port refers to the TLS port. Note also that
cluster-announce-tls-port has no effect if cluster-tls is set to no.
If the above options are not used, the normal Redis Cluster auto-detection
will be used instead.
Note that when remapped, the bus port may not be at the fixed offset of
clients port + 10000, so you can specify any port and bus-port depending
on how they get remapped. If the bus-port is not set, a fixed offset of
10000 will be used as usual.
Example:
cluster-announce-ip 10.1.1.5
cluster-announce-tls-port 6379
cluster-announce-port 0
cluster-announce-bus-port 6380
################################## SLOW LOG ###################################
The Redis Slow Log is a system to log queries that exceeded a specified
execution time. The execution time does not include the I/O operations
like talking with the client, sending the reply and so forth,
but just the time needed to actually execute the command (this is the only
stage of command execution where the thread is blocked and can not serve
other requests in the meantime).
You can configure the slow log with two parameters: one tells Redis
what is the execution time, in microseconds, to exceed in order for the
command to get logged, and the other parameter is the length of the
slow log. When a new command is logged the oldest one is removed from the
queue of logged commands.
The following time is expressed in microseconds, so 1000000 is equivalent
to one second. Note that a negative number disables the slow log, while
a value of zero forces the logging of every command.
slowlog-log-slower-than 10000
There is no limit to this length. Just be aware that it will consume memory.
You can reclaim memory used by the slow log with SLOWLOG RESET.
slowlog-max-len 128
################################ LATENCY MONITOR ##############################
The Redis latency monitoring subsystem samples different operations
at runtime in order to collect data related to possible sources of
latency of a Redis instance.
Via the LATENCY command this information is available to the user that can
print graphs and obtain reports.
The system only logs operations that were performed in a time equal or
greater than the amount of milliseconds specified via the
latency-monitor-threshold configuration directive. When its value is set
to zero, the latency monitor is turned off.
By default latency monitoring is disabled since it is mostly not needed
if you don’t have latency issues, and collecting data has a performance
impact, that while very small, can be measured under big load. Latency
monitoring can easily be enabled at runtime using the command
“CONFIG SET latency-monitor-threshold ” if needed.
latency-monitor-threshold 0
############################# EVENT NOTIFICATION ##############################
Redis can notify Pub/Sub clients about events happening in the key space.
This feature is documented at https://redis.io/topics/notifications
For instance if keyspace events notification is enabled, and a client
performs a DEL operation on key “foo” stored in the Database 0, two
messages will be published via Pub/Sub:
PUBLISH keyspace@0:foo del
PUBLISH keyevent@0:del foo
It is possible to select the events that Redis will notify among a set
of classes. Every class is identified by a single character:
K Keyspace events, published with keyspace@ prefix.
E Keyevent events, published with keyevent@ prefix.
g Generic commands (non-type specific) like DEL, EXPIRE, RENAME, …
$ String commands
l List commands
s Set commands
h Hash commands
z Sorted set commands
x Expired events (events generated every time a key expires)
e Evicted events (events generated when a key is evicted for maxmemory)
t Stream commands
d Module key type events
m Key-miss events (Note: It is not included in the ‘A’ class)
A Alias for g$lshzxetd, so that the “AKE” string means all the events
(Except key-miss events which are excluded from ‘A’ due to their
unique nature).
The “notify-keyspace-events” takes as argument a string that is composed
of zero or multiple characters. The empty string means that notifications
are disabled.
Example: to enable list and generic events, from the point of view of the
event name, use:
notify-keyspace-events Elg
Example 2: to get the stream of the expired keys subscribing to channel
name keyevent@0:expired use:
notify-keyspace-events Ex
By default all notifications are disabled because most users don’t need
this feature and the feature has some overhead. Note that if you don’t
specify at least one of K or E, no events will be delivered.
notify-keyspace-events “”
############################### GOPHER SERVER #################################
Redis contains an implementation of the Gopher protocol, as specified in
the RFC 1436 (https://www.ietf.org/rfc/rfc1436.txt).
The Gopher protocol was very popular in the late '90s. It is an alternative
to the web, and the implementation both server and client side is so simple
that the Redis server has just 100 lines of code in order to implement this
support.
What do you do with Gopher nowadays? Well Gopher never really died, and
lately there is a movement in order for the Gopher more hierarchical content
composed of just plain text documents to be resurrected. Some want a simpler
internet, others believe that the mainstream internet became too much
controlled, and it’s cool to create an alternative space for people that
want a bit of fresh air.
Anyway for the 10nth birthday of the Redis, we gave it the Gopher protocol
as a gift.
— HOW IT WORKS? —
The Redis Gopher support uses the inline protocol of Redis, and specifically
two kind of inline requests that were anyway illegal: an empty request
or any request that starts with “/” (there are no Redis commands starting
with such a slash). Normal RESP2/RESP3 requests are completely out of the
path of the Gopher protocol implementation and are served as usual as well.
If you open a connection to Redis when Gopher is enabled and send it
a string like “/foo”, if there is a key named “/foo” it is served via the
Gopher protocol.
In order to create a real Gopher “hole” (the name of a Gopher site in Gopher
talking), you likely need a script like the following:
https://github.com/antirez/gopher2redis
— SECURITY WARNING —
If you plan to put Redis on the internet in a publicly accessible address
to server Gopher pages MAKE SURE TO SET A PASSWORD to the instance.
Once a password is set:
1. The Gopher server (when enabled, not by default) will still serve
content via Gopher.
2. However other commands cannot be called before the client will
authenticate.
So use the ‘requirepass’ option to protect your instance.
Note that Gopher is not currently supported when ‘io-threads-do-reads’
is enabled.
To enable Gopher support, uncomment the following line and set the option
from no (the default) to yes.
gopher-enabled no
############################### ADVANCED CONFIG ###############################
Hashes are encoded using a memory efficient data structure when they have a
small number of entries, and the biggest entry does not exceed a given
threshold. These thresholds can be configured using the following directives.
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
Lists are also encoded in a special way to save a lot of space.
The number of entries allowed per internal list node can be specified
as a fixed maximum size or a maximum number of elements.
For a fixed maximum size, use -5 through -1, meaning:
-5: max size: 64 Kb <-- not recommended for normal workloads
-4: max size: 32 Kb <-- not recommended
-3: max size: 16 Kb <-- probably not recommended
-2: max size: 8 Kb <-- good
-1: max size: 4 Kb <-- good
Positive numbers mean store up to exactly that number of elements
per list node.
The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),
but if your use case is unique, adjust the settings as necessary.
list-max-ziplist-size -2
Lists may also be compressed.
Compress depth is the number of quicklist ziplist nodes from each side of
the list to exclude from compression. The head and tail of the list
are always uncompressed for fast push/pop operations. Settings are:
0: disable all list compression
1: depth 1 means "don’t start compressing until after 1 node into the list,
going from either the head or tail"
So: [head]->node->node->…->node->[tail]
[head], [tail] will always be uncompressed; inner nodes will compress.
2: [head]->[next]->node->node->…->node->[prev]->[tail]
2 here means: don’t compress head or head->next or tail->prev or tail,
but compress all nodes between them.
3: [head]->[next]->[next]->node->node->…->node->[prev]->[prev]->[tail]
etc.
list-compress-depth 0
Sets have a special encoding in just one case: when a set is composed
of just strings that happen to be integers in radix 10 in the range
of 64 bit signed integers.
The following configuration setting sets the limit in the size of the
set in order to use this special memory saving encoding.
set-max-intset-entries 512
Similarly to hashes and lists, sorted sets are also specially encoded in
order to save a lot of space. This encoding is only used when the length and
elements of a sorted set are below the following limits:
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
HyperLogLog sparse representation bytes limit. The limit includes the
16 bytes header. When an HyperLogLog using the sparse representation crosses
this limit, it is converted into the dense representation.
A value greater than 16000 is totally useless, since at that point the
dense representation is more memory efficient.
The suggested value is ~ 3000 in order to have the benefits of
the space efficient encoding without slowing down too much PFADD,
which is O(N) with the sparse encoding. The value can be raised to
~ 10000 when CPU is not a concern, but space is, and the data set is
composed of many HyperLogLogs with cardinality in the 0 - 15000 range.
hll-sparse-max-bytes 3000
Streams macro node max size / items. The stream data structure is a radix
tree of big nodes that encode multiple items inside. Using this configuration
it is possible to configure how big a single node can be in bytes, and the
maximum number of items it may contain before switching to a new node when
appending new stream entries. If any of the following settings are set to
zero, the limit is ignored, so for instance it is possible to set just a
max entries limit by setting max-bytes to 0 and max-entries to the desired
value.
stream-node-max-bytes 4096
stream-node-max-entries 100
Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
order to help rehashing the main Redis hash table (the one mapping top-level
keys to values). The hash table implementation Redis uses (see dict.c)
performs a lazy rehashing: the more operation you run into a hash table
that is rehashing, the more rehashing “steps” are performed, so if the
server is idle the rehashing is never complete and some more memory is used
by the hash table.
The default is to use this millisecond 10 times every second in order to
actively rehash the main dictionaries, freeing memory when possible.
If unsure:
use “activerehashing no” if you have hard latency requirements and it is
not a good thing in your environment that Redis can reply from time to time
to queries with 2 milliseconds delay.
use “activerehashing yes” if you don’t have such hard requirements but
want to free memory asap when possible.
指定是否激活重置哈希，默认为开启
activerehashing yes
The client output buffer limits can be used to force disconnection of clients
that are not reading data from the server fast enough for some reason (a
common reason is that a Pub/Sub client can’t consume messages as fast as the
publisher can produce them).
The limit can be set differently for the three different classes of clients:
normal -> normal clients including MONITOR clients
replica -> replica clients
pubsub -> clients subscribed to at least one pubsub channel or pattern
The syntax of every client-output-buffer-limit directive is the following:
client-output-buffer-limit
A client is immediately disconnected once the hard limit is reached, or if
the soft limit is reached and remains reached for the specified number of
seconds (continuously).
So for instance if the hard limit is 32 megabytes and the soft limit is
16 megabytes / 10 seconds, the client will get disconnected immediately
if the size of the output buffers reach 32 megabytes, but will also get
disconnected if the client reaches 16 megabytes and continuously overcomes
the limit for 10 seconds.
By default normal clients are not limited because they don’t receive data
without asking (in a push way), but just after a request, so only
asynchronous clients may create a scenario where data is requested faster
than it can read.
Instead there is a default limit for pubsub and replica clients, since
subscribers and replicas receive data in a push fashion.
Both the hard or the soft limit can be disabled by setting them to zero.
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit replica 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
Client query buffers accumulate new commands. They are limited to a fixed
amount by default in order to avoid that a protocol desynchronization (for
instance due to a bug in the client) will lead to unbound memory usage in
the query buffer. However you can configure it here if you have very special
needs, such us huge multi/exec requests or alike.
client-query-buffer-limit 1gb
In the Redis protocol, bulk requests, that are, elements representing single
strings, are normally limited to 512 mb. However you can change this limit
here, but must be 1mb or greater
proto-max-bulk-len 512mb
Redis calls an internal function to perform many background tasks, like
closing connections of clients in timeout, purging expired keys that are
never requested, and so forth.
Not all tasks are performed with the same frequency, but Redis checks for
tasks to perform according to the specified “hz” value.
By default “hz” is set to 10. Raising the value will use more CPU when
Redis is idle, but at the same time will make Redis more responsive when
there are many keys expiring at the same time, and timeouts may be
handled with more precision.
The range is between 1 and 500, however a value over 100 is usually not
a good idea. Most users should use the default of 10 and raise this up to
100 only in environments where very low latency is required.
hz 10
Normally it is useful to have an HZ value which is proportional to the
number of clients connected. This is useful in order, for instance, to
avoid too many clients are processed for each background task invocation
in order to avoid latency spikes.
Since the default HZ value by default is conservatively set to 10, Redis
offers, and enables by default, the ability to use an adaptive HZ value
which will temporarily raise when there are many connected clients.
When dynamic HZ is enabled, the actual configured HZ will be used
as a baseline, but multiples of the configured HZ value will be actually
used as needed once more clients are connected. In this way an idle
instance will use very little CPU time while a busy instance will be
more responsive.
dynamic-hz yes
When a child rewrites the AOF file, if the following option is enabled
the file will be fsync-ed every 32 MB of data generated. This is useful
in order to commit the file to the disk more incrementally and avoid
big latency spikes.
aof-rewrite-incremental-fsync yes
When redis saves RDB file, if the following option is enabled
the file will be fsync-ed every 32 MB of data generated. This is useful
in order to commit the file to the disk more incrementally and avoid
big latency spikes.
rdb-save-incremental-fsync yes
Redis LFU eviction (see maxmemory setting) can be tuned. However it is a good
idea to start with the default settings and only change them after investigating
how to improve the performances and how the keys LFU change over time, which
is possible to inspect via the OBJECT FREQ command.
There are two tunable parameters in the Redis LFU implementation: the
counter logarithm factor and the counter decay time. It is important to
understand what the two parameters mean before changing them.
The LFU counter is just 8 bits per key, it’s maximum value is 255, so Redis
uses a probabilistic increment with logarithmic behavior. Given the value
of the old counter, when a key is accessed, the counter is incremented in
this way:
1. A random number R between 0 and 1 is extracted.
2. A probability P is calculated as 1/(old_value*lfu_log_factor+1).
3. The counter is incremented only if R < P.
The default lfu-log-factor is 10. This is a table of how the frequency
counter changes with a different number of accesses with different
logarithmic factors:
±-------±-----------±-----------±-----------±-----------±-----------+
| factor | 100 hits | 1000 hits | 100K hits | 1M hits | 10M hits |
±-------±-----------±-----------±-----------±-----------±-----------+
| 0 | 104 | 255 | 255 | 255 | 255 |
±-------±-----------±-----------±-----------±-----------±-----------+
| 1 | 18 | 49 | 255 | 255 | 255 |
±-------±-----------±-----------±-----------±-----------±-----------+
| 10 | 10 | 18 | 142 | 255 | 255 |
±-------±-----------±-----------±-----------±-----------±-----------+
| 100 | 8 | 11 | 49 | 143 | 255 |
±-------±-----------±-----------±-----------±-----------±-----------+
NOTE: The above table was obtained by running the following commands:
redis-benchmark -n 1000000 incr foo
redis-cli object freq foo
NOTE 2: The counter initial value is 5 in order to give new objects a chance
to accumulate hits.
The counter decay time is the time, in minutes, that must elapse in order
for the key counter to be divided by two (or decremented if it has a value
less <= 10).
The default value for the lfu-decay-time is 1. A special value of 0 means to
decay the counter every time it happens to be scanned.
lfu-log-factor 10
lfu-decay-time 1
########################### ACTIVE DEFRAGMENTATION #######################
What is active defragmentation?
-------------------------------
Active (online) defragmentation allows a Redis server to compact the
spaces left between small allocations and deallocations of data in memory,
thus allowing to reclaim back memory.
Fragmentation is a natural process that happens with every allocator (but
less so with Jemalloc, fortunately) and certain workloads. Normally a server
restart is needed in order to lower the fragmentation, or at least to flush
away all the data and create it again. However thanks to this feature
implemented by Oran Agra for Redis 4.0 this process can happen at runtime
in a “hot” way, while the server is running.
Basically when the fragmentation is over a certain level (see the
configuration options below) Redis will start to create new copies of the
values in contiguous memory regions by exploiting certain specific Jemalloc
features (in order to understand if an allocation is causing fragmentation
and to allocate it in a better place), and at the same time, will release the
old copies of the data. This process, repeated incrementally for all the keys
will cause the fragmentation to drop back to normal values.
Important things to understand:
1. This feature is disabled by default, and only works if you compiled Redis
to use the copy of Jemalloc we ship with the source code of Redis.
This is the default with Linux builds.
2. You never need to enable this feature if you don’t have fragmentation
issues.
3. Once you experience fragmentation, you can enable this feature when
needed with the command “CONFIG SET activedefrag yes”.
The configuration parameters are able to fine tune the behavior of the
defragmentation process. If you are not sure about what they mean it is
a good idea to leave the defaults untouched.
Enabled active defragmentation
activedefrag no
Minimum amount of fragmentation waste to start active defrag
active-defrag-ignore-bytes 100mb
Minimum percentage of fragmentation to start active defrag
active-defrag-threshold-lower 10
Maximum percentage of fragmentation at which we use maximum effort
active-defrag-threshold-upper 100
Minimal effort for defrag in CPU percentage, to be used when the lower
threshold is reached
active-defrag-cycle-min 1
Maximal effort for defrag in CPU percentage, to be used when the upper
threshold is reached
active-defrag-cycle-max 25
Maximum number of set/hash/zset/list fields that will be processed from
the main dictionary scan
active-defrag-max-scan-fields 1000
Jemalloc background thread for purging will be enabled by default
jemalloc-bg-thread yes
![第1章第21节：效率：如何通过格式刷将样式快速复制到其它对象 [PowerPoint精美幻灯片实战教程]](https://img-blog.csdnimg.cn/img_convert/c1b7175ea4f62bb3aabbb718e5360a4c.png)
