Solaris11中U盘的使用请移步至here
下载Solaris的usb镜像
http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html?ssSourceSiteId=ocomen
要使用 usbcopy 实用程序将usb镜像写入usb存储中,必须先安装distribution-constructor 软件包
pkg install distribution-constructor
solaris11中的repo配置请移步至here
然后将下载的usb镜像写入U盘
root@oracle:~# usbcopy ./sol-11_1-live-x86.usb //usb镜像的路径
Found the following USB devices:
0: /dev/rdsk/c9t0d0p0 7.7 GB Kingtiger G20 1100 //0是设备/dev/rdsk/c9t0d0p0
Enter the number of your choice: 0 //让选择写入那个usb设备
WARNING: All data on your USB storage will be lost.
Are you sure you want to install to
Kingtiger G20 1100, 7700 MB at /dev/rdsk/c9t0d0p0 ? (y/n) y //y确定写入
Copying and verifying image to USB device
Finished 1159 MB in 1125 seconds (1.0MB/s)
0 block(s) re-written due to verification failure
Completed copy to USB //写入完成
将机器设置usb启动,然后开始安装!
######################
本文由笔者原创
作者:hohn
转载请注明出处