09:14:43Tue Aug 09, 2011

09:14:43

Tue Aug 09, 2011

Serial Communication Serial Port Address Externa 1 Serial Connector Failsafe Baud Rat巳 Remote Termina1 Type Redirection After Boot

dell和ibm服务器串口重定向功能的配置

重要：串口设置的时候，终端仿真模式和波特率必须设置一致，我们统一规定终端仿真模 式为vtlOO,波特率设置为115200c 一 Dell服务器的串口重定向功能配置

1设置bios,启动的时候按F2进入bios设置,进入Serial Communication选项

System Time System Datr Memory Settings Processor Settings SATA Settings ? Boot Settings Integrated Devices PCI IRQ Assignment Serial Communication Embedded Server Management Power MAnagement

I Up,Down Arrow to select I SPACE,to chanae 1 ESC to exit I Fl二Help | 设置第一项 Serial Communication 为 On with Console Redirection via COM2贞他默认，保存退 出。

On uith Console Redirection via COM2 Serial Devicel=C0Ml,Serial DeviceZ=C0M2 Serial Devicel

115200

UT100/UTZZ0 Enabled

2配遏远程管理卡

系统