小米路由器mini刷机并且部署奇奇怪怪的东西
本文章主要写了这些东西:
- 救砖(官方UBOOT)
- 开SSH
- 刷pandorabox
- 配置软件源
- Uboot
救砖
1.下载官方映像http://www.miwifi.com/miwifi_download.html
2.改名miwifi_r1cm_firmware.bin
3.复制到U盘,插上
4.断电摁着reset并插上电,知道黄灯闪烁
5.等待
开SSH
1.上https://d.miwifi.com/rom/ssh
2.下载工具包
接下来步骤照上3-5
刷pandorabox
1.SSH连上,把从http://downloads.openwrt.org.cn/PandoraBox/Xiaomi-Mini-R1CM下载的固件复制到/tmp
2.执行
mtd -r write /tmp/Name_of_image OS1
3.Wait
配置软件源
1.系统->软件包->配置
dest root /
dest ram /tmp
lists_dir ext /etc/opkg-lists
option overlay_root /overlay
# notice
# dest usb /mnt/sdb1/opkg
# Depend on your devicearch all 100
arch ramips_24kec 200
arch ramips 300
arch mips 400
arch unkown 500src/gz barrier_breaker_base http://mirrors.ustc.edu.cn/openwrt/barrier_breaker/14.07/ramips/mt7620a/packages/base
src/gz barrier_breaker_luci http://mirrors.ustc.edu.cn/openwrt/barrier_breaker/14.07/ramips/mt7620a/packages/luci
src/gz barrier_breaker_management http://mirrors.ustc.edu.cn/openwrt/barrier_breaker/14.07/ramips/mt7620a/packages/management
src/gz barrier_breaker_oldpackages http://mirrors.ustc.edu.cn/openwrt/barrier_breaker/14.07/ramips/mt7620a/packages/oldpackages
src/gz barrier_breaker_packages http://mirrors.ustc.edu.cn/openwrt/barrier_breaker/14.07/ramips/mt7620a/packages/packages
src/gz barrier_breaker_routing http://mirrors.ustc.edu.cn/openwrt/barrier_breaker/14.07/ramips/mt7620a/packages/routing
src/gz barrier_breaker_telephony http://mirrors.ustc.edu.cn/openwrt/barrier_breaker/14.07/ramips/mt7620a/packages/telephony
2.
cd /tmpwget http://mirrors.ustc.edu.cn/openwrt/barrier_breaker/14.07/ramips/mt7620a/packages/base/libc_0.9.33.2-1_ramips_24kec.ipkopkg install /tmp/libc_0.9.33.2-1_ramips_24kec.ipk
3.尝试update
opkg update
Uboot
1.Flash deadless uboot
cd /tmp
wget http://downloads.openwrt.org.cn/PandoraBox/Xiaomi-Mini-R1CM/u-boot/uboot-xiaomi-mini-115200.bin -O uboot.bin mtd -r write /tmp/uboot.bin Bootloader
2.How to use uboot
reset开机,黄灯闪烁后松开
电脑使用网线连接lan口,将有线网卡的IP设为静态(192.168.1.X ,255.255.255.0 ,192.168.1.1)
在浏览器中打开192.168.1.1
随意刷机
Backup
dd if=/dev/mtd0 of=/extdisks/sda1/rom/ALL.bin dd if=/dev/mtd1 of=/extdisks/sda1/rom/Bootloader.bin dd if=/dev/mtd2 of=/extdisks/sda1/rom/Config.bin dd if=/dev/mtd3 of=/extdisks/sda1/rom/Factory.bin dd if=/dev/mtd4 of=/extdisks/sda1/rom/OS1.bin dd if=/dev/mtd5 of=/extdisks/sda1/rom/rootfs.bin dd if=/dev/mtd6 of=/extdisks/sda1/rom/OS2.bin dd if=/dev/mtd7 of=/extdisks/sda1/rom/overlay.bin dd if=/dev/mtd8 of=/extdisks/sda1/rom/crash.bin dd if=/dev/mtd9 of=/extdisks/sda1/rom/reserved.bin dd if=/dev/mtd10 of=/extdisks/sda1/rom/Bdata.bin
restore
mtd -r write /extdisks/sda1/rom/Bootloader.bin Bootloader mtd -r write /extdisks/sda1/rom/Config.bin Config mtd -r write /extdisks/sda1/rom/Factory.bin Factory mtd -r write /extdisks/sda1/rom/OS1.bin OS1 mtd -r write /extdisks/sda1/rom/rootfs.bin rootfs mtd -r write /extdisks/sda1/rom/OS2.bin OS2 mtd -r write /extdisks/sda1/rom/overlay.bin overlay mtd -r write /extdisks/sda1/rom/crash.bin crash mtd -r write /extdisks/sda1/rom/reserved.bin reserved mtd -r write /extdisks/sda1/rom/Bdata.bin Bdata
解决疑难杂症
1.Could not lock /var/lock/opkg.lock
rm -f /var/lock/opkg.lock
opkg update