android-goldfish-5.4-dev
AOSP > 文档 > 核心主题 > 输入

https://www.kernel.org/doc/Documentation/input/input.txt
https://www.kernel.org/doc/Documentation/input/event-codes.txt
https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt

---

1、Input子系统相关定义

1.1 代码位置

Android_Kernel\goldfish\drivers\input
Android_Kernel\goldfish\include\linux\input.h 定义了一组标准事件类型和代码

1.2 input_dev结构体：表示输入设备

Name： 设备名称
Phys： 系统层次结构中设备的物理路径
Uniq： 设备的唯一标识码（如果设备有）
Id： 设备的Id（struct input_Id）
Propbit： 设备属性和怪癖的位图。
Evbit： 设备支持的事件类型的位图（EV_KEY、EV_REL等）
Keybit： 此设备具有的keys/buttons位图
Relbit： 设备的相对轴位图
Absbit： 设备的绝对轴位图
Mscbit： 设备支持的杂项事件的位图
Ledbit： 设备上存在的LED位图
Sndbit: 设备支持的音效位图
Ffbit： 设备支持的力反馈效果位图
Swbit： 设备上存在的开关位图
Hint_events_per_packet： 设备在数据包中生成的平均事件数（EV_SYN/SYN_REPORT事件之间）。由事件处理程序用于估计容纳事件所需的缓冲区大小。
Keycodemax： 键代码表的大小
Keycodesize： 键代码表中元素的大小
Keycode： 此设备的扫描码到密钥码的映射
Getkeycode： 用于检索当前密钥映射的可选遗留方法。
Setkeycode： 更改当前密钥映射的可选方法，用于实现稀疏密钥映射。如果未提供，将使用默认机制。该方法在保持event_lock时被调用，因此不能休眠
Ff： 如果设备支持力反馈效应，则与设备相关的力反馈结构
Poller： 如果设备设置为使用轮询模式，则与设备关联的轮询器结构
Repeat_key： 存储上次按键的按键代码；用于实现软件自动监管
Timer: 软件自动恢复的计时器
Rep： 自动回放参数的当前值（延迟、速率）
Mt： 指向多点触摸状态的指针
Absinfo： 包含绝对轴信息（当前值、最小值、最大值、平坦值、模糊值、分辨率）的&struct input_Absinfo元素数组
Key： 反映设备按键/按钮的当前状态
Led： 反映设备Led的当前状态
Snd： 反映音效的当前状态
Sw： 反映设备开关的当前状态
Open： 当第一个用户调用input_Open_device()时，会调用此方法。驱动程序必须准备设备开始生成事件（启动轮询线程、请求IRQ、提交URB等）
Close： 当最后一个用户调用input_Close_device（）时，会调用此方法。
Flush： 清除设备。最常用于消除与设备断开连接时加载到设备中的力反馈效应
Event： 发送到设备的事件的事件处理程序，如EV_LED或EV_SND。该设备应执行请求的操作（打开LED、播放声音等）呼叫受保护
Event_lock：并且不能休眠
Grab： 当前抓取设备的输入句柄（通过EVIOCGRAB ioctl）。当句柄抓取设备时，它将成为来自该设备的所有输入事件的唯一接收者
Event_lock： 当input core接收并处理设备的新事件时（在input_Event()中），将获取此spinlock。在设备向输入核心注册后，访问和/或修改设备参数（如keymap或absmin、absmax、absfuzz等）的代码必须使用此锁。
Mutex： 序列化对open()、close()和flush()方法的调用
Users： 存储打开此设备的用户数（输入处理程序）。input_open_device()和input_close_device()使用它来确保dev->open()仅在第一个用户打开设备时调用，dev->close()在最后一个用户关闭设备时调用
Going_away： 标记正在注销的设备，并使用-ENODEV导致input_open_device*()失败。
Dev: 此设备的驱动程序模型视图
H_list： 与设备相关联的输入句柄列表。访问列表时，必须持有dev->mutex
Node： 用于将设备放置在input_dev_list上
Num_vals： 当前帧中排队的值数
Max_vals： 帧中排队的最大值数
Vals： 当前帧中排队的值数组
Devres_managed： 表示设备使用Devres框架进行管理，不需要显式注销或释放。
Timestamp： 存储由驱动程序调用的input_set_Timestamp设置的时间戳

include/linux/input.h

struct input_dev {const char *name;const char *phys;const char *uniq;struct input_id id;unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)];unsigned long evbit[BITS_TO_LONGS(EV_CNT)];unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];unsigned long relbit[BITS_TO_LONGS(REL_CNT)];unsigned long absbit[BITS_TO_LONGS(ABS_CNT)];unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)];unsigned long ledbit[BITS_TO_LONGS(LED_CNT)];unsigned long sndbit[BITS_TO_LONGS(SND_CNT)];unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];unsigned long swbit[BITS_TO_LONGS(SW_CNT)];unsigned int hint_events_per_packet;unsigned int keycodemax;unsigned int keycodesize;void *keycode;int (*setkeycode)(struct input_dev *dev,const struct input_keymap_entry *ke,unsigned int *old_keycode);int (*getkeycode)(struct input_dev *dev,struct input_keymap_entry *ke);struct ff_device *ff;struct input_dev_poller *poller;unsigned int repeat_key;struct timer_list timer;int rep[REP_CNT];struct input_mt *mt;struct input_absinfo *absinfo;unsigned long key[BITS_TO_LONGS(KEY_CNT)];unsigned long led[BITS_TO_LONGS(LED_CNT)];unsigned long snd[BITS_TO_LONGS(SND_CNT)];unsigned long sw[BITS_TO_LONGS(SW_CNT)];int (*open)(struct input_dev *dev);void (*close)(struct input_dev *dev);int (*flush)(struct input_dev *dev, struct file *file);int (*event)(struct input_dev *dev, unsigned int type, unsigned int code, int value);struct input_handle __rcu *grab;spinlock_t event_lock;struct mutex mutex;unsigned int users;bool going_away;struct device dev;struct list_head	h_list;struct list_head	node;unsigned int num_vals;unsigned int max_vals;struct input_value *vals;bool devres_managed;ktime_t timestamp[INPUT_CLK_MAX];
};

1.3 input_handler结构体：struct input_handler - implements one of interfaces for input devices

Private： 驱动程序特定数据
Event： 事件处理程序。此方法由输入核心调用，同时禁用中断并保持dev->event_lock spinlock，因此它可能不会休眠
Events： 事件序列处理程序。此方法由输入核心调用，同时禁用中断并保持dev->event_lock spinlock，因此它可能不会休眠
Filter： 类似于event；将普通事件处理程序与“Filter”分离。
Match： 在比较设备的id和处理程序的id_table后调用，以便在设备和处理程序之间进行细粒度匹配
Connect： 在将处理程序附加到输入设备时调用
Disconnect： 断开处理程序与输入设备的连接
**Start：**启动给定句柄的处理程序。这个函数是在connect()方法之后由输入核心调用的，当“抓取”设备的进程释放它时也是如此
Legacy_minors: 由使用旧版次要范围的驱动程序设置为%true
Minor： 此驱动程序可以提供的设备的32个遗留次要范围的开始
Name： 处理程序的名称，显示在/proc/bus/input/handlers中
Id_table： 指向此驱动程序可以处理的input_device_Id表的指针
H_list： 与处理程序关联的输入处理程序列表
Node： 用于将驱动程序放置到input_handler_list上


Input handlers附加到input devices并创建input handles。可能有多个处理程序同时连接到任何给定的输入设备。他们所有人都将获得设备生成的输入事件的副本。使用完全相同的结构来实现输入过滤器。 Input core允许过滤器首先运行，并且如果任何过滤器指示应该过滤事件（通过从其filter()方法返回%true），则不会将事件传递给常规处理程序。请注意，输入核心序列化对connect()和disconnect()方法的调用。

include/linux/input.h

struct input_handler {void *private;void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);void (*events)(struct input_handle *handle,const struct input_value *vals, unsigned int count);bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value);bool (*match)(struct input_handler *handler, struct input_dev *dev);int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);void (*disconnect)(struct input_handle *handle);void (*start)(struct input_handle *handle);bool legacy_minors;int minor;const char *name;const struct input_device_id *id_table;struct list_head	h_list;struct list_head	node;
};

1.4 input_handle结构体：将输入设备与输入处理程序链接

一个input_dev上报的事件可以被多个input_handler接收处理，一个input_handler也可以处理多个input_dev上报的事件，这样多个input_dev和多个input_handler之间可能会形成交织的网状。在这种情况下，需要一个桥梁来搭建两者之间的联系，两边的函数调用都可以通过这个“中介”进行，input_handle就是这个桥梁。

Private： 特定于处理程序的数据
Open： 显示句柄是否“打开”的计数器，即应从其设备传递事件
Name： 创建句柄的处理程序赋予句柄的名称
Dev： 句柄所连接的输入设备
Handler： 通过该句柄与设备一起工作的句柄
D_node： 用于将句柄放在设备的附加句柄列表中
H_node： 用于将句柄放在处理程序的句柄列表中，从中获取事件

include/linux/input.h

struct input_handle {void *private;int open;const char *name;struct input_dev *dev;struct input_handler *handler;struct list_head	d_node;struct list_head	h_node;
};

2、input core 初始化

include/linux/input.h
drivers/input/input.c

• sybsys_initcall注册设定启动等级，保证其初始化会早于input设备和input_handler的注册
• module_init方式注册input设备和input_handler

subsys_initcall(input_init);
module_exit(input_exit);

2.1 input_init 初始化入口

drivers/input/input.c

class_register(&input_class) input类注册，放在/sys/class
input_proc_init(); 主要用于input_handler和devices信息查看，Proc文件创建
register_chrdev_region(MKDEV(INPUT_MAJOR, 0), INPUT_MAX_CHAR_DEVICES, "input") 注册字符设备

static int __init input_init(void)
{int err;err = class_register(&input_class);if (err) {pr_err("unable to register input_dev class\n");return err;}err = input_proc_init();if (err)goto fail1;err = register_chrdev_region(MKDEV(INPUT_MAJOR, 0),INPUT_MAX_CHAR_DEVICES, "input");if (err) {pr_err("unable to register char major %d", INPUT_MAJOR);goto fail2;}return 0;fail2:	input_proc_exit();fail1:	class_unregister(&input_class);return err;
}

2.1.1 class_register

class_register(&input_class) input类注册，放在/sys/class

Linux内核API class_register|极客笔记

drivers/input/input.c

struct class input_class = {.name		= "input",.devnode	= input_devnode,
};
EXPORT_SYMBOL_GPL(input_class);

include/linux/device.h
drivers/base/class.c

/* This is a #define to keep the compiler from merging different* instances of the __key variable */
#define class_register(class)			\
({						\static struct lock_class_key __key;	\__class_register(class, &__key);	\
})

2.1.2 input_proc_init

input_proc_init() 主要用于input_handler和devices信息查看，Proc文件创建

static int __init input_proc_init(void)
{struct proc_dir_entry *entry;proc_bus_input_dir = proc_mkdir("bus/input", NULL);if (!proc_bus_input_dir)return -ENOMEM;entry = proc_create("devices", 0, proc_bus_input_dir,&input_devices_fileops);if (!entry)goto fail1;entry = proc_create("handlers", 0, proc_bus_input_dir,&input_handlers_fileops);if (!entry)goto fail2;return 0;fail2:	remove_proc_entry("devices", proc_bus_input_dir);fail1: remove_proc_entry("bus/input", NULL);return -ENOMEM;
}

2.1.3 register_chrdev_region

register_chrdev_region(MKDEV(INPUT_MAJOR, 0), INPUT_MAX_CHAR_DEVICES, "input") 注册字符设备；创建一个主设备为13的“input”设备

include/uapi/linux/major.h

#define INPUT_MAJOR		13

drivers/input/input.c

#define INPUT_MAX_CHAR_DEVICES		1024

fs/char_dev.c

/*** register_chrdev_region() - register a range of device numbers* @from: the first in the desired range of device numbers; must include*        the major number.* @count: the number of consecutive device numbers required* @name: the name of the device or driver.** Return value is zero on success, a negative error code on failure.*/
int register_chrdev_region(dev_t from, unsigned count, const char *name)
{struct char_device_struct *cd;dev_t to = from + count;dev_t n, next;for (n = from; n < to; n = next) {next = MKDEV(MAJOR(n)+1, 0);if (next > to)next = to;cd = __register_chrdev_region(MAJOR(n), MINOR(n),next - n, name);if (IS_ERR(cd))goto fail;}return 0;
fail:to = n;for (n = from; n < to; n = next) {next = MKDEV(MAJOR(n)+1, 0);kfree(__unregister_chrdev_region(MAJOR(n), MINOR(n), next - n));}return PTR_ERR(cd);
}

3、 input_dev设备注册

3.1 input_allocate_device：分配input_dev结构体内存

input_allocate_device-为新的输入设备分配内存
返回准备好的结构input_dev或%NULL。
注意：使用input_free_device()释放尚未注册的设备；input_unregister_device()应用于已注册的设备。

drivers/input/input.c

struct input_dev *devm_input_allocate_device(struct device *dev)
{struct input_dev *input;struct input_devres *devres;devres = devres_alloc(devm_input_device_release,sizeof(*devres), GFP_KERNEL);if (!devres)return NULL;input = input_allocate_device();if (!input) {devres_free(devres);return NULL;}input->dev.parent = dev;input->devres_managed = true;devres->input = input;devres_add(dev, devres);return input;
}
EXPORT_SYMBOL(devm_input_allocate_device);

/*** input_allocate_device - allocate memory for new input device** Returns prepared struct input_dev or %NULL.** NOTE: Use input_free_device() to free devices that have not been* registered; input_unregister_device() should be used for already* registered devices.*/
struct input_dev *input_allocate_device(void)
{static atomic_t input_no = ATOMIC_INIT(-1);struct input_dev *dev;dev = kzalloc(sizeof(*dev), GFP_KERNEL);if (dev) {dev->dev.type = &input_dev_type;dev->dev.class = &input_class;device_initialize(&dev->dev);mutex_init(&dev->mutex);spin_lock_init(&dev->event_lock);timer_setup(&dev->timer, NULL, 0);INIT_LIST_HEAD(&dev->h_list);INIT_LIST_HEAD(&dev->node);dev_set_name(&dev->dev, "input%lu",(unsigned long)atomic_inc_return(&input_no));__module_get(THIS_MODULE);}return dev;
}

3.2 input_register_device：带输入核心的寄存器设备

此函数将设备注册到 input core 。在注册之前，必须为设备分配input_allocate_device()及其所有功能。如果函数失败，则必须使用input_free_device()释放设备。一旦设备成功注册，就可以使用input_unregister_device()进行注销；在这种情况下，不应调用input_free_device()。请注意，此函数还用于注册托管输入设备（使用devm_input_allocate_device()分配的设备）。这样的托管输入设备不需要明确地注销或释放，它们的拆除由devres基础设施控制。同样值得注意的是，删除托管输入设备在内部是一个两步过程：注册的托管输入设备首先未注册，但保留在内存中，并且仍然可以处理input_event()调用（尽管事件不会传递到任何地方）。稍后，当devres堆栈展开到进行设备分配的点时，将释放托管输入设备。

• device_add(&dev->dev)：将设备注册为linux设备
• list_add_tail(&dev->node, &input_dev_list)：将设备添加到linux内核全局列表input_dev_list
• list_for_each_entry(handler, &input_handler_list, node)
input_attach_handler(dev, handler);：遍历input_handler_list，为设备找到自己的handler

drivers/input/input.c

int input_register_device(struct input_dev *dev)
{struct input_devres *devres = NULL;struct input_handler *handler;unsigned int packet_size;const char *path;int error;if (test_bit(EV_ABS, dev->evbit) && !dev->absinfo) {dev_err(&dev->dev,"Absolute device without dev->absinfo, refusing to register\n");return -EINVAL;}if (dev->devres_managed) {devres = devres_alloc(devm_input_device_unregister,sizeof(*devres), GFP_KERNEL);if (!devres)return -ENOMEM;devres->input = dev;}/* Every input device generates EV_SYN/SYN_REPORT events. */__set_bit(EV_SYN, dev->evbit);/* KEY_RESERVED is not supposed to be transmitted to userspace. */__clear_bit(KEY_RESERVED, dev->keybit);/* Make sure that bitmasks not mentioned in dev->evbit are clean. */input_cleanse_bitmasks(dev);packet_size = input_estimate_events_per_packet(dev);if (dev->hint_events_per_packet < packet_size)dev->hint_events_per_packet = packet_size;dev->max_vals = dev->hint_events_per_packet + 2;dev->vals = kcalloc(dev->max_vals, sizeof(*dev->vals), GFP_KERNEL);if (!dev->vals) {error = -ENOMEM;goto err_devres_free;}/** If delay and period are pre-set by the driver, then autorepeating* is handled by the driver itself and we don't do it in input.c.*/if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD])input_enable_softrepeat(dev, 250, 33);if (!dev->getkeycode)dev->getkeycode = input_default_getkeycode;if (!dev->setkeycode)dev->setkeycode = input_default_setkeycode;if (dev->poller)input_dev_poller_finalize(dev->poller);error = device_add(&dev->dev);if (error)goto err_free_vals;path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);pr_info("%s as %s\n",dev->name ? dev->name : "Unspecified device",path ? path : "N/A");kfree(path);error = mutex_lock_interruptible(&input_mutex);if (error)goto err_device_del;list_add_tail(&dev->node, &input_dev_list);list_for_each_entry(handler, &input_handler_list, node)input_attach_handler(dev, handler);input_wakeup_procfs_readers();mutex_unlock(&input_mutex);if (dev->devres_managed) {dev_dbg(dev->dev.parent, "%s: registering %s with devres.\n",__func__, dev_name(&dev->dev));devres_add(dev->dev.parent, devres);}return 0;err_device_del:device_del(&dev->dev);
err_free_vals:kfree(dev->vals);dev->vals = NULL;
err_devres_free:devres_free(devres);return error;
}
EXPORT_SYMBOL(input_register_device);

3.3 案例："gpio-keys"设备注册

drivers/input/keyboard/gpio_keys.c
“gpio-keys”： platform_driver_register(&gpio_keys_device_driver) -> gpio_keys_probe -> devm_input_allocate_device -> input_register_device


如其它案例等查看如下等目录：
drivers/input/gameport
drivers/input/joystick
drivers/input/keyboard
drivers/input/misc
drivers/input/mouse
drivers/input/rmi4
drivers/input/serio
drivers/input/tablet
drivers/input/touchscreen

static struct platform_driver gpio_keys_device_driver = {.probe		= gpio_keys_probe,.shutdown	= gpio_keys_shutdown,.driver		= {.name	= "gpio-keys",.pm	= &gpio_keys_pm_ops,.of_match_table = gpio_keys_of_match,.dev_groups	= gpio_keys_groups,}
};static int __init gpio_keys_init(void)
{return platform_driver_register(&gpio_keys_device_driver);
}

static int gpio_keys_probe(struct platform_device *pdev)
{struct device *dev = &pdev->dev;const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);struct fwnode_handle *child = NULL;struct gpio_keys_drvdata *ddata;struct input_dev *input;int i, error;int wakeup = 0;if (!pdata) {pdata = gpio_keys_get_devtree_pdata(dev);if (IS_ERR(pdata))return PTR_ERR(pdata);}ddata = devm_kzalloc(dev, struct_size(ddata, data, pdata->nbuttons),GFP_KERNEL);if (!ddata) {dev_err(dev, "failed to allocate state\n");return -ENOMEM;}ddata->keymap = devm_kcalloc(dev,pdata->nbuttons, sizeof(ddata->keymap[0]),GFP_KERNEL);if (!ddata->keymap)return -ENOMEM;input = devm_input_allocate_device(dev);if (!input) {dev_err(dev, "failed to allocate input device\n");return -ENOMEM;}ddata->pdata = pdata;ddata->input = input;mutex_init(&ddata->disable_lock);platform_set_drvdata(pdev, ddata);input_set_drvdata(input, ddata);input->name = pdata->name ? : pdev->name;input->phys = "gpio-keys/input0";input->dev.parent = dev;input->open = gpio_keys_open;input->close = gpio_keys_close;input->id.bustype = BUS_HOST;input->id.vendor = 0x0001;input->id.product = 0x0001;input->id.version = 0x0100;input->keycode = ddata->keymap;input->keycodesize = sizeof(ddata->keymap[0]);input->keycodemax = pdata->nbuttons;/* Enable auto repeat feature of Linux input subsystem */if (pdata->rep)__set_bit(EV_REP, input->evbit);for (i = 0; i < pdata->nbuttons; i++) {const struct gpio_keys_button *button = &pdata->buttons[i];if (!dev_get_platdata(dev)) {child = device_get_next_child_node(dev, child);if (!child) {dev_err(dev,"missing child device node for entry %d\n",i);return -EINVAL;}}error = gpio_keys_setup_key(pdev, input, ddata,button, i, child);if (error) {fwnode_handle_put(child);return error;}if (button->wakeup)wakeup = 1;}fwnode_handle_put(child);error = input_register_device(input);if (error) {dev_err(dev, "Unable to register input device, error: %d\n",error);return error;}device_init_wakeup(dev, wakeup);return 0;
}

4、input_handler注册

4.1 常见的input_handler

一般来说input_handler注册会在input_dev设备注册之前，常见的input_handler：

• evdev_handler：响应绝大部分事件，默认input处理事件
• mousedev_handler：鼠标类input事件
• joydev_handler ：游戏遥感类input事件
• kbd_handler：键盘类事件
• input_leds_handler
• apmpower_handler

drivers/input/evdev.c

static struct input_handler evdev_handler = {.event		= evdev_event,.events		= evdev_events,.connect	= evdev_connect,.disconnect	= evdev_disconnect,.legacy_minors	= true,.minor		= EVDEV_MINOR_BASE,.name		= "evdev",.id_table	= evdev_ids,
};

drivers/tty/vt/keyboard.c

static struct input_handler kbd_handler = {.event		= kbd_event,.match		= kbd_match,.connect	= kbd_connect,.disconnect	= kbd_disconnect,.start		= kbd_start,.name		= "kbd",.id_table	= kbd_ids,
};

drivers/input/mousedev.c

static struct input_handler mousedev_handler = {.event		= mousedev_event,.connect	= mousedev_connect,.disconnect	= mousedev_disconnect,.legacy_minors	= true,.minor		= MOUSEDEV_MINOR_BASE,.name		= "mousedev",.id_table	= mousedev_ids,
};

drivers/input/joydev.c

static struct input_handler joydev_handler = {.event		= joydev_event,.match		= joydev_match,.connect	= joydev_connect,.disconnect	= joydev_disconnect,.legacy_minors	= true,.minor		= JOYDEV_MINOR_BASE,.name		= "joydev",.id_table	= joydev_ids,
};

drivers/input/input-leds.c

static struct input_handler input_leds_handler = {.event =	input_leds_event,.connect =	input_leds_connect,.disconnect =	input_leds_disconnect,.name =		"leds",.id_table =	input_leds_ids,
};

drivers/input/apm-power.c

static struct input_handler apmpower_handler = {.event =	apmpower_event,.connect =	apmpower_connect,.disconnect =	apmpower_disconnect,.name =		"apm-power",.id_table =	apmpower_ids,
};

4.2 input_register_handler注册函数

此函数为系统中的输入设备注册一个新的input_handler（接口），并将其连接到与该处理程序兼容的所有input devices。

• INIT_LIST_HEAD(&handler->h_list)：初始化在Linux的内核链表
• list_add_tail(&handler->node, &input_handler_list)：将handler添加到linux内核全局列表input_handler_list
• list_for_each_entry(handler, &input_handler_list, node)
input_attach_handler(dev, handler);：遍历input_handler_list，为设备找到自己的handler

/*** input_register_handler - register a new input handler* @handler: handler to be registered** This function registers a new input handler (interface) for input* devices in the system and attaches it to all input devices that* are compatible with the handler.*/
int input_register_handler(struct input_handler *handler)
{struct input_dev *dev;int error;error = mutex_lock_interruptible(&input_mutex);if (error)return error;INIT_LIST_HEAD(&handler->h_list);list_add_tail(&handler->node, &input_handler_list);list_for_each_entry(dev, &input_dev_list, node)input_attach_handler(dev, handler);input_wakeup_procfs_readers();mutex_unlock(&input_mutex);return 0;
}
EXPORT_SYMBOL(input_register_handler);

5、input_dev和input_handler匹配input_handle

5.1 input_match_device匹配

input_dev设备注册和input_handler注册都会调用input_attach_handler

• input_match_device：匹配成功返回handler->id_table，即input_device_id
• handler->connect(handler, dev, id)：匹配成功调用connect函数，如drivers/input/evdev.c#evdev_connect、drivers/input/mousedev.c#mousedev_connect

static const struct input_device_id *input_match_device(struct input_handler *handler,struct input_dev *dev)
{const struct input_device_id *id;for (id = handler->id_table; id->flags || id->driver_info; id++) {if (input_match_device_id(dev, id) &&(!handler->match || handler->match(handler, dev))) {return id;}}return NULL;
}static int input_attach_handler(struct input_dev *dev, struct input_handler *handler)
{const struct input_device_id *id;int error;id = input_match_device(handler, dev);if (!id)return -ENODEV;error = handler->connect(handler, dev, id);if (error && error != -ENODEV)pr_err("failed to attach handler %s to device %s, error: %d\n",handler->name, kobject_name(&dev->dev.kobj), error);return error;
}

5.2 connect函数

如drivers/input/evdev.c#evdev_connect、drivers/input/mousedev.c#mousedev_connect等；查看通用事件处理evdev.c：

• .driver_info = 1： 其中evdev_ids匹配所有设备，
• evdev_connect：一旦注册就会evdev的connect；
  1》input_register_handle注册一个新的input_handle，主要将handle分别挂载在input_dev和input_handler成员链表；
  (evdev->handle.dev = input_get_device(dev);、evdev->handle.handler = handler;)
  2》input_get_new_minor最多能创建32个event设备#define EVDEV_MINORS 32；
  3》cdev_device_add最终调用device_add，向Linux系统新创建一个event设备/dev/input/eventX
  

drivers/input/evdev.c

struct evdev {int open;struct input_handle handle;wait_queue_head_t wait;struct evdev_client __rcu *grab;struct list_head client_list;spinlock_t client_lock; /* protects client_list */struct mutex mutex;struct device dev;struct cdev cdev;bool exist;
};/** Create new evdev device. Note that input core serializes calls* to connect and disconnect.*/
static int evdev_connect(struct input_handler *handler, struct input_dev *dev,const struct input_device_id *id)
{struct evdev *evdev;int minor;int dev_no;int error;minor = input_get_new_minor(EVDEV_MINOR_BASE, EVDEV_MINORS, true);if (minor < 0) {error = minor;pr_err("failed to reserve new minor: %d\n", error);return error;}evdev = kzalloc(sizeof(struct evdev), GFP_KERNEL);if (!evdev) {error = -ENOMEM;goto err_free_minor;}INIT_LIST_HEAD(&evdev->client_list);spin_lock_init(&evdev->client_lock);mutex_init(&evdev->mutex);init_waitqueue_head(&evdev->wait);evdev->exist = true;dev_no = minor;/* Normalize device number if it falls into legacy range */if (dev_no < EVDEV_MINOR_BASE + EVDEV_MINORS)dev_no -= EVDEV_MINOR_BASE;dev_set_name(&evdev->dev, "event%d", dev_no);evdev->handle.dev = input_get_device(dev);evdev->handle.name = dev_name(&evdev->dev);evdev->handle.handler = handler;evdev->handle.private = evdev;evdev->dev.devt = MKDEV(INPUT_MAJOR, minor);evdev->dev.class = &input_class;evdev->dev.parent = &dev->dev;evdev->dev.release = evdev_free;device_initialize(&evdev->dev);error = input_register_handle(&evdev->handle);if (error)goto err_free_evdev;cdev_init(&evdev->cdev, &evdev_fops);error = cdev_device_add(&evdev->cdev, &evdev->dev);if (error)goto err_cleanup_evdev;return 0;err_cleanup_evdev:evdev_cleanup(evdev);input_unregister_handle(&evdev->handle);err_free_evdev:put_device(&evdev->dev);err_free_minor:input_free_minor(minor);return error;
}static const struct input_device_id evdev_ids[] = {{ .driver_info = 1 },	/* Matches all devices */{ },			/* Terminating zero entry */
};MODULE_DEVICE_TABLE(input, evdev_ids);static struct input_handler evdev_handler = {.event		= evdev_event,.events		= evdev_events,.connect	= evdev_connect,.disconnect	= evdev_disconnect,.legacy_minors	= true,.minor		= EVDEV_MINOR_BASE,.name		= "evdev",.id_table	= evdev_ids,
};

5.3 input_register_handle

input_register_handle-注册一个新的输入句柄


Handle：用于注册的Handle


这个函数将一个新的输入句柄放在input_dev和input_handler的列表中，这样，一旦使用input_open_device()打开它，事件就可以在其中流动。这个函数应该从处理程序的connect()方法调用。

/*** input_register_handle - register a new input handle* @handle: handle to register** This function puts a new input handle onto device's* and handler's lists so that events can flow through* it once it is opened using input_open_device().** This function is supposed to be called from handler's* connect() method.*/
int input_register_handle(struct input_handle *handle)
{struct input_handler *handler = handle->handler;struct input_dev *dev = handle->dev;int error;/** We take dev->mutex here to prevent race with* input_release_device().*/error = mutex_lock_interruptible(&dev->mutex);if (error)return error;/** Filters go to the head of the list, normal handlers* to the tail.*/if (handler->filter)list_add_rcu(&handle->d_node, &dev->h_list);elselist_add_tail_rcu(&handle->d_node, &dev->h_list);mutex_unlock(&dev->mutex);/** Since we are supposed to be called from ->connect()* which is mutually exclusive with ->disconnect()* we can't be racing with input_unregister_handle()* and so separate lock is not needed here.*/list_add_tail_rcu(&handle->h_node, &handler->h_list);if (handler->start)handler->start(handle);return 0;
}
EXPORT_SYMBOL(input_register_handle);

5.4 input_dev \ input_handler \ input_handle 关系

input_dev 是硬件驱动层，代表一个input设备
input_handler 是事件处理层，代表一个事件处理器
input_handle 属于核心层，代表一个配对的input设备与input事件处理器

input_dev 通过全局的input_dev_list链接在一起。设备注册的时候实现这个操作。
input_handler 通过全局的input_handler_list链接在一起。事件处理器注册的时候实现这个操作。

input_hande 没有一个全局的链表，它注册的时候将自己分别挂在了input_dev 和 input_handler 的h_list上了。
通过input_dev 和input_handler就可以找到input_handle 在设备注册和事件处理器， 注册的时候都要进行配对工作，配对后就会实现链接。
通过input_handle也可以找到input_dev和input_handler。

6、input事件上报

input事件一般采用中断方式上报，相关方法input_report_abs、input_report_key、input_sync等。最终input_sync来表示一次事件上报，最终调用input_event处理。

6.1 底层Input事件上报

AOSP > 文档 > 核心主题 > 键盘设备、AOSP > 文档 > 核心主题 > 触摸设备

不同的input设备上报的input事件的格式不同，常用的按键或者触摸屏采用的中断方式上报。
比如触摸屏上报input事件时一般需要上报手指的id、x坐标、y坐标等信息。


https://www.kernel.org/doc/Documentation/input/input.txt
https://www.kernel.org/doc/Documentation/input/event-codes.txt
https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt

input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
input_sync(input);

-	type	code	value
第1个点	EV_ABS	ABS_MT_SLOT	0
\	EV_ABS	ABS_MT_TRACKING_ID	id
\	EV_ABS	ABS_MT_POSITION_X	x
\	EV_ABS	ABS_MT_POSITION_Y	y
…	…	…	…
第2个点	EV_ABS	ABS_MT_SLOT	n
\	EV_ABS	ABS_MT_TRACKING_ID	id
\	EV_ABS	ABS_MT_POSITION_X	x
\	EV_ABS	ABS_MT_POSITION_Y	y

6.2 input_event 报告新的input事件

实现各种输入设备的驱动程序应使用此功能来报告输入事件。另请参见input_inject_event()。
注意：input_event()可以在使用input_allocate_device()分配输入设备之后立即安全使用，甚至在使用input_register_device()注册之前也是如此，但该事件不会到达任何输入处理程序。input_event()的这种早期调用可以用于“种子”开关的初始状态或绝对轴的初始位置等

• input_handle_event：每一个事件上报都是通过input_event接口来完成，在判定事件类型是否支持后，主要是调用input_handle_event来完成
• input_get_disposition：根据上报信息判断怎么处理
• handler->events()/handler->event()：input_dev对应input_handler，如evdev_handler等(input_event -> input_handle_event -> input_pass_values -> input_to_handler -> handler->events()/handler->event())

drivers/input/input.c

/** Pass event first through all filters and then, if event has not been* filtered out, through all open handles. This function is called with* dev->event_lock held and interrupts disabled.*/
static unsigned int input_to_handler(struct input_handle *handle,struct input_value *vals, unsigned int count)
{struct input_handler *handler = handle->handler;struct input_value *end = vals;struct input_value *v;if (handler->filter) {for (v = vals; v != vals + count; v++) {if (handler->filter(handle, v->type, v->code, v->value))continue;if (end != v)*end = *v;end++;}count = end - vals;}if (!count)return 0;if (handler->events)handler->events(handle, vals, count);else if (handler->event)for (v = vals; v != vals + count; v++)handler->event(handle, v->type, v->code, v->value);return count;
}/** Pass values first through all filters and then, if event has not been* filtered out, through all open handles. This function is called with* dev->event_lock held and interrupts disabled.*/
static void input_pass_values(struct input_dev *dev,struct input_value *vals, unsigned int count)
{struct input_handle *handle;struct input_value *v;if (!count)return;rcu_read_lock();handle = rcu_dereference(dev->grab);if (handle) {count = input_to_handler(handle, vals, count);} else {list_for_each_entry_rcu(handle, &dev->h_list, d_node)if (handle->open) {count = input_to_handler(handle, vals, count);if (!count)break;}}rcu_read_unlock();/* trigger auto repeat for key events */if (test_bit(EV_REP, dev->evbit) && test_bit(EV_KEY, dev->evbit)) {for (v = vals; v != vals + count; v++) {if (v->type == EV_KEY && v->value != 2) {if (v->value)input_start_autorepeat(dev, v->code);elseinput_stop_autorepeat(dev);}}}
}/*** input_event() - report new input event* @dev: device that generated the event* @type: type of the event* @code: event code* @value: value of the event** This function should be used by drivers implementing various input* devices to report input events. See also input_inject_event().** NOTE: input_event() may be safely used right after input device was* allocated with input_allocate_device(), even before it is registered* with input_register_device(), but the event will not reach any of the* input handlers. Such early invocation of input_event() may be used* to 'seed' initial state of a switch or initial position of absolute* axis, etc.*/
void input_event(struct input_dev *dev,unsigned int type, unsigned int code, int value)
{unsigned long flags;if (is_event_supported(type, dev->evbit, EV_MAX)) {spin_lock_irqsave(&dev->event_lock, flags);input_handle_event(dev, type, code, value);spin_unlock_irqrestore(&dev->event_lock, flags);}
}
EXPORT_SYMBOL(input_event);static void input_handle_event(struct input_dev *dev,unsigned int type, unsigned int code, int value)
{int disposition = input_get_disposition(dev, type, code, &value);if (disposition != INPUT_IGNORE_EVENT && type != EV_SYN)add_input_randomness(type, code, value);if ((disposition & INPUT_PASS_TO_DEVICE) && dev->event)dev->event(dev, type, code, value);if (!dev->vals)return;if (disposition & INPUT_PASS_TO_HANDLERS) {struct input_value *v;if (disposition & INPUT_SLOT) {v = &dev->vals[dev->num_vals++];v->type = EV_ABS;v->code = ABS_MT_SLOT;v->value = dev->mt->slot;}v = &dev->vals[dev->num_vals++];v->type = type;v->code = code;v->value = value;}if (disposition & INPUT_FLUSH) {if (dev->num_vals >= 2)input_pass_values(dev, dev->vals, dev->num_vals);dev->num_vals = 0;/** Reset the timestamp on flush so we won't end up* with a stale one. Note we only need to reset the* monolithic one as we use its presence when deciding* whether to generate a synthetic timestamp.*/dev->timestamp[INPUT_CLK_MONO] = ktime_set(0, 0);} else if (dev->num_vals >= dev->max_vals - 2) {dev->vals[dev->num_vals++] = input_value_sync;input_pass_values(dev, dev->vals, dev->num_vals);dev->num_vals = 0;}}

6.3 evdev_handler中evdev_events处理

evdev_events将传入事件传递给所有连接的客户端
evdev_event/evdev_events -> evdev_pass_values -> __pass_event ->


input事件存储在client->buffer中；kill_fasync用于发送通知事件，告诉上层client->buffer中有数据可以读了。

drivers/input/evdev.c

static void __pass_event(struct evdev_client *client,const struct input_event *event)
{client->buffer[client->head++] = *event;client->head &= client->bufsize - 1;if (unlikely(client->head == client->tail)) {/** This effectively "drops" all unconsumed events, leaving* EV_SYN/SYN_DROPPED plus the newest event in the queue.*/client->tail = (client->head - 2) & (client->bufsize - 1);client->buffer[client->tail] = (struct input_event) {.input_event_sec = event->input_event_sec,.input_event_usec = event->input_event_usec,.type = EV_SYN,.code = SYN_DROPPED,.value = 0,};client->packet_head = client->tail;}if (event->type == EV_SYN && event->code == SYN_REPORT) {client->packet_head = client->head;kill_fasync(&client->fasync, SIGIO, POLL_IN);}
}static void evdev_pass_values(struct evdev_client *client,const struct input_value *vals, unsigned int count,ktime_t *ev_time)
{struct evdev *evdev = client->evdev;const struct input_value *v;struct input_event event;struct timespec64 ts;bool wakeup = false;if (client->revoked)return;ts = ktime_to_timespec64(ev_time[client->clk_type]);event.input_event_sec = ts.tv_sec;event.input_event_usec = ts.tv_nsec / NSEC_PER_USEC;/* Interrupts are disabled, just acquire the lock. */spin_lock(&client->buffer_lock);for (v = vals; v != vals + count; v++) {if (__evdev_is_filtered(client, v->type, v->code))continue;if (v->type == EV_SYN && v->code == SYN_REPORT) {/* drop empty SYN_REPORT */if (client->packet_head == client->head)continue;wakeup = true;}event.type = v->type;event.code = v->code;event.value = v->value;__pass_event(client, &event);}spin_unlock(&client->buffer_lock);if (wakeup)wake_up_interruptible(&evdev->wait);
}/** Pass incoming events to all connected clients.*/
static void evdev_events(struct input_handle *handle,const struct input_value *vals, unsigned int count)
{struct evdev *evdev = handle->private;struct evdev_client *client;ktime_t *ev_time = input_get_timestamp(handle->dev);rcu_read_lock();client = rcu_dereference(evdev->grab);if (client)evdev_pass_values(client, vals, count, ev_time);elselist_for_each_entry_rcu(client, &evdev->client_list, node)evdev_pass_values(client, vals, count, ev_time);rcu_read_unlock();
}/** Pass incoming event to all connected clients.*/
static void evdev_event(struct input_handle *handle,unsigned int type, unsigned int code, int value)
{struct input_value vals[] = { { type, code, value } };evdev_events(handle, vals, 1);
}

7、Input事件内核空间传递到用户空间

• EventHub::getEvents -> resd：input事件存储在client->buffer中，当应用层或框架层调用read函数读取/dev/input/event*文件时，例如evdev.c会调用evdev_read返回数据，
• event_fetch_next_event：判断client->buffer这个循环缓冲区中的头尾指针是否相等（相等时buffer中没有数据），不相等时取出一个input_event类型的事件放入到event中；
• input_event_to_user：将此事件copy到应用层，input_event_size函数是用来获取一个input_event事件的大小，循环复制client->buffer中的事件到应用层的buffer中。

frameworks/native/services/inputflinger/reader/EventHub.cpp

size_t EventHub::getEvents(int timeoutMillis, RawEvent* buffer, size_t bufferSize) {ALOG_ASSERT(bufferSize >= 1);std::scoped_lock _l(mLock);struct input_event readBuffer[bufferSize];RawEvent* event = buffer;size_t capacity = bufferSize;bool awoken = false;for (;;) {nsecs_t now = systemTime(SYSTEM_TIME_MONOTONIC);// Reopen input devices if needed.if (mNeedToReopenDevices) {mNeedToReopenDevices = false;ALOGI("Reopening all input devices due to a configuration change.");closeAllDevicesLocked();mNeedToScanDevices = true;break; // return to the caller before we actually rescan}// Report any devices that had last been added/removed.for (auto it = mClosingDevices.begin(); it != mClosingDevices.end();) {std::unique_ptr<Device> device = std::move(*it);ALOGV("Reporting device closed: id=%d, name=%s\n", device->id, device->path.c_str());event->when = now;event->deviceId = (device->id == mBuiltInKeyboardId)? ReservedInputDeviceId::BUILT_IN_KEYBOARD_ID: device->id;event->type = DEVICE_REMOVED;event += 1;it = mClosingDevices.erase(it);mNeedToSendFinishedDeviceScan = true;if (--capacity == 0) {break;}}if (mNeedToScanDevices) {mNeedToScanDevices = false;scanDevicesLocked();mNeedToSendFinishedDeviceScan = true;}while (!mOpeningDevices.empty()) {std::unique_ptr<Device> device = std::move(*mOpeningDevices.rbegin());mOpeningDevices.pop_back();ALOGV("Reporting device opened: id=%d, name=%s\n", device->id, device->path.c_str());event->when = now;event->deviceId = device->id == mBuiltInKeyboardId ? 0 : device->id;event->type = DEVICE_ADDED;event += 1;// Try to find a matching video device by comparing device namesfor (auto it = mUnattachedVideoDevices.begin(); it != mUnattachedVideoDevices.end();it++) {std::unique_ptr<TouchVideoDevice>& videoDevice = *it;if (tryAddVideoDeviceLocked(*device, videoDevice)) {// videoDevice was transferred to 'device'it = mUnattachedVideoDevices.erase(it);break;}}auto [dev_it, inserted] = mDevices.insert_or_assign(device->id, std::move(device));if (!inserted) {ALOGW("Device id %d exists, replaced.", device->id);}mNeedToSendFinishedDeviceScan = true;if (--capacity == 0) {break;}}if (mNeedToSendFinishedDeviceScan) {mNeedToSendFinishedDeviceScan = false;event->when = now;event->type = FINISHED_DEVICE_SCAN;event += 1;if (--capacity == 0) {break;}}// Grab the next input event.bool deviceChanged = false;while (mPendingEventIndex < mPendingEventCount) {const struct epoll_event& eventItem = mPendingEventItems[mPendingEventIndex++];if (eventItem.data.fd == mINotifyFd) {if (eventItem.events & EPOLLIN) {mPendingINotify = true;} else {ALOGW("Received unexpected epoll event 0x%08x for INotify.", eventItem.events);}continue;}if (eventItem.data.fd == mWakeReadPipeFd) {if (eventItem.events & EPOLLIN) {ALOGV("awoken after wake()");awoken = true;char wakeReadBuffer[16];ssize_t nRead;do {nRead = read(mWakeReadPipeFd, wakeReadBuffer, sizeof(wakeReadBuffer));} while ((nRead == -1 && errno == EINTR) || nRead == sizeof(wakeReadBuffer));} else {ALOGW("Received unexpected epoll event 0x%08x for wake read pipe.",eventItem.events);}continue;}Device* device = getDeviceByFdLocked(eventItem.data.fd);if (device == nullptr) {ALOGE("Received unexpected epoll event 0x%08x for unknown fd %d.", eventItem.events,eventItem.data.fd);ALOG_ASSERT(!DEBUG);continue;}if (device->videoDevice && eventItem.data.fd == device->videoDevice->getFd()) {if (eventItem.events & EPOLLIN) {size_t numFrames = device->videoDevice->readAndQueueFrames();if (numFrames == 0) {ALOGE("Received epoll event for video device %s, but could not read frame",device->videoDevice->getName().c_str());}} else if (eventItem.events & EPOLLHUP) {// TODO(b/121395353) - consider adding EPOLLRDHUPALOGI("Removing video device %s due to epoll hang-up event.",device->videoDevice->getName().c_str());unregisterVideoDeviceFromEpollLocked(*device->videoDevice);device->videoDevice = nullptr;} else {ALOGW("Received unexpected epoll event 0x%08x for device %s.", eventItem.events,device->videoDevice->getName().c_str());ALOG_ASSERT(!DEBUG);}continue;}// This must be an input eventif (eventItem.events & EPOLLIN) {int32_t readSize =read(device->fd, readBuffer, sizeof(struct input_event) * capacity);if (readSize == 0 || (readSize < 0 && errno == ENODEV)) {// Device was removed before INotify noticed.ALOGW("could not get event, removed? (fd: %d size: %" PRId32" bufferSize: %zu capacity: %zu errno: %d)\n",device->fd, readSize, bufferSize, capacity, errno);deviceChanged = true;closeDeviceLocked(*device);} else if (readSize < 0) {if (errno != EAGAIN && errno != EINTR) {ALOGW("could not get event (errno=%d)", errno);}} else if ((readSize % sizeof(struct input_event)) != 0) {ALOGE("could not get event (wrong size: %d)", readSize);} else {int32_t deviceId = device->id == mBuiltInKeyboardId ? 0 : device->id;size_t count = size_t(readSize) / sizeof(struct input_event);for (size_t i = 0; i < count; i++) {struct input_event& iev = readBuffer[i];event->when = processEventTimestamp(iev);event->readTime = systemTime(SYSTEM_TIME_MONOTONIC);event->deviceId = deviceId;event->type = iev.type;event->code = iev.code;event->value = iev.value;event += 1;capacity -= 1;}if (capacity == 0) {// The result buffer is full.  Reset the pending event index// so we will try to read the device again on the next iteration.mPendingEventIndex -= 1;break;}}} else if (eventItem.events & EPOLLHUP) {ALOGI("Removing device %s due to epoll hang-up event.",device->identifier.name.c_str());deviceChanged = true;closeDeviceLocked(*device);} else {ALOGW("Received unexpected epoll event 0x%08x for device %s.", eventItem.events,device->identifier.name.c_str());}}// readNotify() will modify the list of devices so this must be done after// processing all other events to ensure that we read all remaining events// before closing the devices.if (mPendingINotify && mPendingEventIndex >= mPendingEventCount) {mPendingINotify = false;readNotifyLocked();deviceChanged = true;}// Report added or removed devices immediately.if (deviceChanged) {continue;}// Return now if we have collected any events or if we were explicitly awoken.if (event != buffer || awoken) {break;}// Poll for events.// When a device driver has pending (unread) events, it acquires// a kernel wake lock.  Once the last pending event has been read, the device// driver will release the kernel wake lock, but the epoll will hold the wakelock,// since we are using EPOLLWAKEUP. The wakelock is released by the epoll when epoll_wait// is called again for the same fd that produced the event.// Thus the system can only sleep if there are no events pending or// currently being processed.//// The timeout is advisory only.  If the device is asleep, it will not wake just to// service the timeout.mPendingEventIndex = 0;mLock.unlock(); // release lock before pollint pollResult = epoll_wait(mEpollFd, mPendingEventItems, EPOLL_MAX_EVENTS, timeoutMillis);mLock.lock(); // reacquire lock after pollif (pollResult == 0) {// Timed out.mPendingEventCount = 0;break;}if (pollResult < 0) {// An error occurred.mPendingEventCount = 0;// Sleep after errors to avoid locking up the system.// Hopefully the error is transient.if (errno != EINTR) {ALOGW("poll failed (errno=%d)\n", errno);usleep(100000);}} else {// Some events occurred.mPendingEventCount = size_t(pollResult);}}// All done, return the number of events we read.return event - buffer;
}

drivers/input/evdev.c

static ssize_t evdev_read(struct file *file, char __user *buffer,size_t count, loff_t *ppos)
{struct evdev_client *client = file->private_data;struct evdev *evdev = client->evdev;struct input_event event;size_t read = 0;int error;if (count != 0 && count < input_event_size())return -EINVAL;for (;;) {if (!evdev->exist || client->revoked)return -ENODEV;if (client->packet_head == client->tail &&(file->f_flags & O_NONBLOCK))return -EAGAIN;/** count == 0 is special - no IO is done but we check* for error conditions (see above).*/if (count == 0)break;while (read + input_event_size() <= count &&evdev_fetch_next_event(client, &event)) {if (input_event_to_user(buffer + read, &event))return -EFAULT;read += input_event_size();}if (read)break;if (!(file->f_flags & O_NONBLOCK)) {error = wait_event_interruptible(evdev->wait,client->packet_head != client->tail ||!evdev->exist || client->revoked);if (error)return error;}}return read;
}

7.1 evdev_fetch_next_event

event_fetch_next_event：判断client->buffer这个循环缓冲区中的头尾指针是否相等（相等时buffer中没有数据），不相等时取出一个input_event类型的事件放入到event中

drivers/input/evdev.c

static int evdev_fetch_next_event(struct evdev_client *client,struct input_event *event)
{int have_event;spin_lock_irq(&client->buffer_lock);have_event = client->packet_head != client->tail;if (have_event) {*event = client->buffer[client->tail++];client->tail &= client->bufsize - 1;}spin_unlock_irq(&client->buffer_lock);return have_event;
}

7.2 input_event_to_user

input_event_to_user：将此事件copy到应用层，input_event_size函数是用来获取一个input_event事件的大小，循环复制client->buffer中的事件到应用层的buffer中

drivers/input/input-compat.c

#ifdef CONFIG_COMPATint input_event_to_user(char __user *buffer,const struct input_event *event)
{if (in_compat_syscall() && !COMPAT_USE_64BIT_TIME) {struct input_event_compat compat_event;compat_event.sec = event->input_event_sec;compat_event.usec = event->input_event_usec;compat_event.type = event->type;compat_event.code = event->code;compat_event.value = event->value;if (copy_to_user(buffer, &compat_event,sizeof(struct input_event_compat)))return -EFAULT;} else {if (copy_to_user(buffer, event, sizeof(struct input_event)))return -EFAULT;}return 0;
}#elseint input_event_to_user(char __user *buffer,const struct input_event *event)
{if (copy_to_user(buffer, event, sizeof(struct input_event)))return -EFAULT;return 0;
}#endif /* CONFIG_COMPAT */

参考文献

https://www.kernel.org/doc/Documentation/input/input.txt
Linux值输入子系统分析(详解)
input输入子系统